Study guide

10.5 Rigging Piping, Pipe Spools & Rebar Bundles

NCCER Rigger Basic / Advanced

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, Qualifications & Safety Standards

1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones

2 Chapter 2: Slings & Hitches

2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency

3 Chapter 3: Sling Angles & Tension Calculations

3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment

4 Chapter 4: Sling Inspection & Removal Criteria

4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection

5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices

5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20

6 Chapter 6: Rigging Hardware Connections & Specialty Tools

6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control

7 Chapter 7: Wire Rope Construction, Inspection & Reeving

7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance

8 Chapter 8: Load Weight Estimation & Center of Gravity

8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability

9 Chapter 9: Crane Operations, Safety Devices & Communication

9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents

10 Chapter 10: Advanced Rigging Operations & Lateral Movement

10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles

11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts

11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection

12 Chapter 12: Personnel Hoisting & Site Rigging Management

12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs

10.5 Rigging Piping, Pipe Spools & Rebar Bundles

Key Takeaways Explain This Topic AI

Piping materials and rebar are an explicit Rigging Practices topic on the NCCER Advanced Rigger written assessment, and module 38301 closes with rigging and handling rebar bundles.

Shipping bands, strapping, and bundle wires are packaging, not rigging: a bundle is always rigged with rated slings around the material itself, never by its bands.

Round, smooth material slips out of a single choker, so bundles and pipe are rigged with two chokers spaced well inboard of the ends, and a double-wrap choker is used when the material can slide or roll.

A pipe spool is a composite load: the pipe wall, flanges, valves, fittings, and any residual or hydrotest water each contribute weight, and valves and fittings push the center of gravity away from the geometric center.

Long, flexible material sags and can whip: use a spreader bar or strongback to control deflection, taglines at both distal ends to control rotation, and edge protection wherever a synthetic sling crosses a flange edge or a cut pipe end.

Last updated: August 2026

10.5 Rigging Piping, Pipe Spools & Rebar Bundles

The NCCER Advanced Rigger written assessment lists "piping materials and rebar" as a Rigging Practices topic, module 38301 Advanced Rigging concludes with "guidance in the rigging and handling of rebar bundles," and module 38102 Rigging Practices expects candidates to "properly attach rigging hardware for routine lifts and pipe lifts ."

Pipe and rebar get their own topic because they break the assumptions that work for a machinery skid. They are round, they are smooth, they are flexible, they arrive banded, and their weight is rarely where it looks like it should be.

Why Round and Bundled Material Is Different

  • Property Consequence for the rigger
  • Round and smooth A single choker slips along the length and the load rolls out of the hitch
  • Bundled, not solid Individual pieces slide out of the middle of a loose bundle
  • Long and flexible The load sags between pick points and can whip or spring when it lands
  • Coated or greased Mill scale, varnish, or preservative coating cuts the friction a choker depends on
  • Sharp cut ends and flange edges Synthetic slings are cut through in one lift without edge protection
  • Contents Residual product, rainwater, or hydrotest water can weigh as much as the pipe
  • The Hitch: Two Chokers, Spaced, and Often Double-Wrapped

For bundled pipe, tube, conduit, or rebar the standard arrangement is two choker hitches spaced evenly and set well inboard of the ends , so the bundle cannot see-saw and the hitches cannot slide off. Spacing them too close together makes the bundle unstable; spacing them right at the ends lets material slide out of the middle.

When the material is round, smooth, coated, or free to roll, upgrade to a double-wrap choker : the sling is passed completely around the bundle and then choked. The extra wrap gives full 360-degree circumferential contact, which compresses the bundle and grips it, rather than the single-line contact of a standard choker.

Reminder from Chapter 2: a choker hitch is already limited to about 75% of the sling's vertical rated capacity, and it is further reduced by the choke-angle factor when the angle of choke falls below 120 degrees. A double wrap does not increase capacity — it increases grip .

Never rig to the banding. Shipping bands, strapping, and bundle tie wires are packaging applied to hold material together in transit. They carry no rated load, they are not inspected rigging, and they fail without warning. Slings go around the material itself.

Weighing a Pipe Spool: A Composite Calculation

A fabricated pipe spool is exactly the kind of composite load Chapter 8 taught you to break into parts:

Pipe wall. For standard pipe, use the published weight per linear foot for the nominal size and schedule, multiplied by the length. Wall weight rises steeply with schedule — a Schedule 80 line is far heavier than the same Schedule 40 size.

Flanges. Take the catalog weight per flange for the size, class, and facing, and multiply by the count. Class 300 and 600 flanges are dramatically heavier than Class 150.

Valves, fittings, and specialties. Use tag or catalog weights. A single large gate valve can outweigh the pipe it sits in.

Attachments. Supports, lugs, insulation, cladding, and internal linings.

Contents. Water weighs 62.4 lb/ft³ , or 8.34 lb per gallon . A large-diameter spool left full after hydrotest can weigh substantially more than the dry steel.

Then find the center of gravity. A valve or a heavy fitting at one end shifts the CG away from the geometric midpoint, so the spool must be rigged with the hook plumb over the CG (Chapter 8) or with a non-symmetrical bridle whose leg tensions are computed by the principle of moments (Section 3.4). Rigging a valved spool as if it were symmetrical is how spools come out of the slings tail-first.

Rebar Bundles

Rebar bundles behave like a bag of loose sticks that happens to weigh several tons.

Rig around the bar, not the tie wire. Bundle tie wires exist to keep the bundle together on the truck.

Two spaced double-wrap chokers are the default. The wrap compresses the bundle so that individual bars cannot slide out of the center as the bundle flexes.

Control sag. Long bundles deflect under their own weight. Widening the sling spacing helps; a spreader bar or strongback with vertical drops eliminates both the sag and the inward compression a bridle would apply.

Two taglines, one at each distal end. Long bundles rotate readily and have significant wind sail area.

Land it flat and land it supported. Set bundles down on dunnage across the full length, never on two point supports that let the bundle bow, and never on top of an existing bundle that can roll.

Assembled cages and mats need engineered picks. A tied rebar cage has essentially no bending stiffness of its own; it is picked at multiple points from a strongback or spreader system so that it does not fold, and it is often stiffened with temporary bracing before it is lifted.

Landing, Line of Fire & Edge Protection

Nobody's hand goes between the bundle and the dunnage. Use push-poles or guide sticks to align a descending bundle (Section 12.3).

Protect the sling at every edge. A cut pipe end, a raised-face flange, or a rebar bundle corner will cut a synthetic sling through in one lift. Use sleeves, wear pads, corner protectors, or a wire rope or chain sling instead.

Assume the bundle will roll. Chock or block round material immediately once it is landed, before the slings come off.