Study guide
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating
NCCER Rigger Basic / Advanced
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, Qualifications & Safety Standards
1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones
2 Chapter 2: Slings & Hitches
2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency
3 Chapter 3: Sling Angles & Tension Calculations
3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment
4 Chapter 4: Sling Inspection & Removal Criteria
4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection
5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices
5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20
6 Chapter 6: Rigging Hardware Connections & Specialty Tools
6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control
7 Chapter 7: Wire Rope Construction, Inspection & Reeving
7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance
8 Chapter 8: Load Weight Estimation & Center of Gravity
8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability
9 Chapter 9: Crane Operations, Safety Devices & Communication
9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents
10 Chapter 10: Advanced Rigging Operations & Lateral Movement
10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles
11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts
11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection
12 Chapter 12: Personnel Hoisting & Site Rigging Management
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating
Key Takeaways Explain This Topic AI
OSHA 29 CFR 1926.1431 and ASME B30.23 prohibit hoisting personnel by crane unless conventional access methods (scaffolding, ladders, aerial lifts, stairs) are physically impossible or create a substantially greater hazard.
The crane must be derated by 50%: the total suspended weight of the platform, rigging bridle, occupants, and tools cannot exceed 50% of the crane's rated capacity for the specific boom length, angle, and operating radius.
Hoisting machinery must feature positive power load lowering on all hoists (free-fall / live boom mechanisms strictly prohibited) and an anti-two-block (A2B) lockout device that automatically halts upward hoist motion.
The crane must be leveled within a strict 1% grade (0.57 degrees), equipped with functional boom angle and length indicators, and operated at slow, controlled lowering and hoisting speeds without sudden acceleration or braking.
Last updated: August 2026
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating
Hoisting personnel with a mobile or tower crane represents one of the highest-risk operational activities on an industrial or commercial construction site. Because cranes are fundamentally engineered and manufactured as material-handling machines rather than passenger elevators, the mechanical failure of any structural component, wire rope, brake, or rigging element can result in catastrophic injuries or fatalities.
To mitigate these severe life-safety hazards, the Occupational Safety and Health Administration (OSHA) enforces 29 CFR 1926.1431 ( Hoisting Personnel ), supported by the American Society of Mechanical Engineers consensus standard ASME B30.23 ( Personnel Lifting Systems ). Riggers, lift directors, and crane operators must understand the strict legal thresholds, mathematical derating calculations, and mechanical equipment safeguards governing crane-suspended manbaskets.
The "Least Hazardous Means" Doctrine & Regulatory Hierarchy
Under federal law, crane-suspended personnel platforms are strictly prohibited as a standard or routine method of employee access . OSHA 29 CFR 1926.1431(a) establishes that hoisting personnel by crane is only permissible when the employer can demonstrate that conventional access methods are either:
Physically Impossible: The structural design of the worksite or surrounding terrain prevents the erection, installation, or travel of conventional access equipment.
Substantially More Hazardous: Utilizing conventional access equipment exposes employees to a greater, demonstrably more severe hazard than hoisting with an engineered crane system (e.g., erecting scaffolding over turbulent water, unstable slopes, or congested chemical piperacks with toxic release risks). +-----------------------------------------------------------------------------------+
- | OSHA ACCESS METHOD HIERARCHY |
- +-----------------------------------------------------------------------------------+
- | TIER 1 (PRIMARY): Permanent Stairs, Walkways, Engineered Ladders |
- | TIER 2 (CONVENTIONAL): Scaffolding, Man-Lifts, Scissor Lifts, Boom Lifts |
- | TIER 3 (SUSPENDED HOISTING): Certified Personnel Hoists / Construction Elevators |
- | TIER 4 (LAST RESORT ONLY): Crane-Suspended Personnel Platform (OSHA 1926.1431) |
- +-----------------------------------------------------------------------------------+
Exam Key Point: Economic convenience, project scheduling pressure, labor cost savings, and equipment availability are NEVER legal justifications under OSHA standards for utilizing a crane-suspended personnel platform. If a standard boom lift or modular scaffold can safely access the work location, a crane manbasket cannot be used.
The Mandatory 50% Crane Capacity Derating Rule
When a lift qualifies under the Least Hazardous Means rule, OSHA 1926.1431(d)(1) mandates that the crane must be derated by 50% — the total load, including the platform, hook, load line, and rigging , must not exceed 50 percent of the rated capacity for that radius and configuration (the only exception being the proof test itself). This massive safety factor accounts for dynamic shock loading, wind-induced sway, and personnel movement inside the platform.
The Mathematical Derating Rule
The total gross suspended weight—comprising the empty platform, dedicated rigging bridle, all occupants, personal protective equipment (PPE), tools, and materials—must never exceed 50% of the crane's rated net capacity for the specific boom length, boom angle, and maximum operating radius required for the lift.
Maximum Allowable Personnel Load = Crane Rated Net Capacity x 0.50 +-----------------------------------------------------------------------------------+
- | 50% CRANE CAPACITY DERATING STEP-BY-STEP FLOW |
- +-----------------------------------------------------------------------------------+
- | 1. Determine Crane Gross Capacity from Manufacturer Load Chart for Radius/Boom |
- | 2. Subtract Crane Deductions (Hook Block, Overhaul Ball, Slings, Jib, Rigging) |
- | 3. Obtain Crane Net Rated Capacity |
- | 4. Multiply Net Capacity by 50% (0.50) to find Maximum Allowable Gross Weight |
- | 5. Subtract Platform Tare Weight and Dedicated Bridle Rigging Weight |
- | 6. Result = Maximum Permissible Payload (Occupants + PPE + Tools) |
- +-----------------------------------------------------------------------------------+
- Comprehensive Capacity Calculation Example
Consider an industrial turnaround scenario requiring personnel access to an elevated flare tip:
Crane Configuration: 100-ton hydraulic rough-terrain crane, 120 ft main boom extended, operating at a maximum radius of 60 ft.
Manufacturer Chart Gross Capacity at 60 ft Radius: 14,000 lbs.
Crane Deductions:
- Main load block: 1,100 lbs
- Auxiliary headache ball on whip line: 350 lbs
- Effective jib weight stowed: 850 lbs
- Total crane deductions: 1,100 + 350 + 850 = 2,300 lbs
Platform System Data:
- Empty platform tare weight: 1,200 lbs
- Dedicated 4-leg wire rope bridle & master link: 180 lbs
- 2 Ironworkers (including full PPE, harnesses, tools): 2 x 250 lbs = 500 lbs
- Replacement flare ignition parts in secured container: 220 lbs
Let us calculate compliance under OSHA 1926.1431:
- Calculate Crane Net Capacity: Net Capacity = Gross Chart Capacity - Deductions
- Net Capacity = 14,000 lbs - 2,300 lbs = 11,700 lbs
Apply 50% Personnel Derating Limit: Allowable Suspended Weight = 11,700 lbs x 0.50 = 5,850 lbs
Calculate Total Actual Suspended Gross Weight: Actual Gross Weight = Platform + Bridle + Personnel/Tools + Materials
Actual Gross Weight = 1,200 lbs + 180 lbs + 500 lbs + 220 lbs = 2,100 lbs
Evaluate Compliance: 2,100 lbs <= 5,850 lbs (Compliant at 35.9% of derated limit)
The total suspended weight of 2,100 lbs is well within the 5,850 lb allowable derated limit.
Mandatory Crane Equipment & Safety Instrumentation
Under OSHA 29 CFR 1926.1431(d)(5) and ASME B30.23, a crane assigned to personnel hoisting must be equipped with specific operational safety devices, and 1926.1431(d)(5)(vii) prohibits starting personnel hoisting operations unless every one of them is in proper working order. If any of these systems are inoperable or missing, personnel hoisting is strictly prohibited:
Required Safety Feature Regulatory Standard Function & Operational Mandate
Controlled load lowering 1926.1431(d)(5)(vi) The load line hoist drum must have a system other than the hoist brake that regulates lowering speed, and it must be used when hoisting personnel. Free fall of the load line hoist is prohibited (§ 1926.1426(d)), and equipment whose boom hoist can free fall may not be used at all (§ 1926.1426(a)(1)).
Anti two-block 1926.1431(d)(5)(v) A device that automatically prevents contact between the load block/overhaul ball and the boom tip, at all points where two-blocking could occur. The single exception is pile driving, which is covered by 1926.1431(p)(2) instead.
Boom angle indicator 1926.1431(d)(5)(i)(A) Readily visible to the operator; required on equipment with a variable-angle boom (derricks and articulating cranes excepted).
Boom hoist limiting device 1926.1431(d)(5)(i)(B) Also required on variable-angle boom equipment. Articulating cranes instead need a properly functioning automatic overload protection device (d)(5)(ii).
Boom length indicator 1926.1431(d)(5)(iv) Telescoping booms must indicate extended length clearly to the operator, or carry measuring marks on the boom.
Luffing jib devices 1926.1431(d)(5)(iii) Equipment with a luffing jib needs a jib angle indicator readable by the operator plus a jib hoist limiting device.
Level set-up 1926.1431(c)(1) The equipment must be uniformly level within one percent of level grade (about 0.57°) and located on firm footing; cranes on rubber must have outriggers/stabilizers set.
Brakes engaged when parked 1926.1431(d)(4) With the occupied platform in a stationary working position, the load and boom hoist brakes, swing brakes, and secondary braking/locking features must be engaged.
Slow, controlled motion 1926.1431(k)(1) OSHA requires hoisting “in a slow, controlled, cautious manner, with no sudden movements.” The commonly quoted 100 ft/min ceiling comes from ASME B30.23, not from 1926.1431.
Crane Setup & Ground Support Requirements
A crane hoisting personnel must be established on a stable, compacted foundation:
Outrigger Configuration: Outriggers must be fully extended and locked in accordance with manufacturer specifications. On cranes equipped with partial outrigger extension load charts, personnel hoisting is generally prohibited unless explicitly approved in the manufacturer crane manual.
Outrigger Blocking / Pads: Outrigger floats must rest squarely on engineered timber blocking, steel pads, or synthetic mats that distribute ground bearing pressure below the allowable soil bearing capacity.
Crane Levelness: Crane levelness must be verified with a precision carpenter level or electronic tilt sensor across the crane turntable. A level deviation exceeding 1% grade alters boom geometry, induces massive side-loading forces on the boom, and invalidates load chart capacity calculations.
Environmental & Operational Restrictions
Environmental / Operational Hazard Regulatory Limitation & Safe Practice
Wind Speed Threshold Personnel hoisting must cease when sustained wind speeds exceed 20 mph (32 km/h) at the platform height, or at lower wind thresholds specified by the crane manufacturer or platform engineer.
Electrical Power Lines Minimum clearance distances under OSHA 1926.1408 must be maintained (minimum 10 ft for voltages up to 50 kV, plus 0.4 inches per kV above 50 kV, or 20 ft clearance for unverified lines).
Adverse Weather & Storms Hoisting must immediately halt upon detection of lightning within 10 miles, heavy rain reducing visibility, icing on boom sections, or severe fog.
Crane Traveling Prohibition A crane must never travel while hoisting personnel, except for portal cranes on dedicated tracks, cranes on fixed rails, or when an engineering analysis certifies that traveling is the least hazardous option.