Study guide

4.2 Synthetic Web & Round Sling Inspection & Removal Criteria

NCCER Rigger Basic / Advanced

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, Qualifications & Safety Standards

1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones

2 Chapter 2: Slings & Hitches

2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency

3 Chapter 3: Sling Angles & Tension Calculations

3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment

4 Chapter 4: Sling Inspection & Removal Criteria

4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection

5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices

5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20

6 Chapter 6: Rigging Hardware Connections & Specialty Tools

6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control

7 Chapter 7: Wire Rope Construction, Inspection & Reeving

7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance

8 Chapter 8: Load Weight Estimation & Center of Gravity

8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability

9 Chapter 9: Crane Operations, Safety Devices & Communication

9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents

10 Chapter 10: Advanced Rigging Operations & Lateral Movement

10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles

11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts

11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection

12 Chapter 12: Personnel Hoisting & Site Rigging Management

12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs

4.2 Synthetic Web & Round Sling Inspection & Removal Criteria

Key Takeaways Explain This Topic AI

ASME B30.9 and WSTDA standards require immediate removal of synthetic flat web and polyester round slings if the identification tag is missing, detached, or illegible.

Synthetic flat web sling rejection criteria include acid/caustic burns, melting, charring, weld spatter, cuts, snags, broken splice stitching, exposed red core warning yarns, UV bleaching/embrittlement, and knots.

Polyester roundslings consist of continuous internal load-bearing filament yarns protected by an outer jacket; any cut, hole, or tear exposing the core yarns requires immediate removal.

Roundslings require a hands-on tactile inspection along their entire circumference to detect internal core yarn breakage, lumpiness, voids, or stiff fused spots.

Synthetic slings must never be knotted or mechanically altered, and they must always be protected from sharp load edges using engineered corner protectors.

Last updated: August 2026

Synthetic Web & Round Sling Inspection & Removal Criteria

Core Principle: Synthetic slings offer exceptional flexibility, lightweight handling, and protection for finished surfaces. However, because synthetic polymer fibers are highly vulnerable to sharp edges, abrasive friction, ultraviolet radiation, and chemical attack, riggers must execute thorough visual and tactile inspections before every lift . Under ASME B30.9 and WSTDA standards, any synthetic sling with exposed core yarns, chemical burns, weld spatter, broken splice stitching, or an unreadable tag must be condemned immediately.

Synthetic rigging hardware is divided into two primary categories:

Synthetic Flat Web Slings (ASME B30.9-5): Constructed from high-tenacity woven nylon or polyester webbing in single-ply or multi-ply configurations with flat or twisted eyes.

Polyester Endless Roundslings (ASME B30.9-6): Constructed from a continuous loop (hank) of multiple strands of 100% polyester filament yarn enclosed within a protective tubular double-wall woven polyester sleeve.

Sling Identification & Tagging Standards

Under ASME B30.9 and OSHA 29 CFR 1926.251(e), every synthetic web and round sling must bear a permanently attached, legible manufacturer tag . If the tag is missing, illegible, or modified, the sling has an unknown Working Load Limit (WLL) and must be removed from service immediately. +-------------------------------------------------------+

  • | SYNTHETIC WEB SLING RATED TAG |
  • | MANUFACTURER: TITAN RIGGING PRODUCTS |
  • | CODE / MODEL: EE2-902 (Type 3 Eye & Eye, 2-Ply) |
  • | MATERIAL: NYLON WEB |
  • | WIDTH: 2 INCH LENGTH: 10 FT |
  • | RATED CAPACITIES (WLL): |
  • | - VERTICAL: 6,400 LBS |
  • | - CHOKER: 5,000 LBS |
  • | - BASKET: 12,800 LBS (90° Horizontal Angle) |
  • | WARNING: DO NOT EXPOSE TO ACIDS OR TEMPS > 194°F |
  • +-------------------------------------------------------+
  • Synthetic Flat Web Sling Removal Criteria

Under ASME B30.9-5.9.4 and WSTDA-WS-1 , a synthetic web sling must be removed from service if any of the following conditions exist:

1. Missing or Illegible Identification Tag

If the tag is torn off, painted over, bleached white by UV rays, or abraded so that rated capacities cannot be read, the sling must be removed immediately.

2. Acid or Caustic Chemical Burns

Nylon: Severely degraded and dissolved by acids (hydrochloric, sulfuric, nitric). Nylon resists caustics/alkalis.

Polyester: Severely degraded and dissolved by caustics/alkalis (sodium hydroxide, caustic soda, ammonia). Polyester resists moderate acids.

Both Materials: Attacked by chlorine bleach, hydrogen peroxide, and strong oxidizing agents. Chemical degradation causes fiber discoloration, brittleness, and loss of tensile strength.

3. Melting, Charring, or Weld Spatter

Any melting, charred black areas, or embedded weld spatter droplets anywhere on the sling fabric indicates thermal damage exceeding 180°F to 200°F (82°C to 93°C) . Weld spatter burns directly through outer load-bearing fibers, creating localized stress risers.

4. Holes, Tears, Cuts, and Edge Snags

Because tensile stress concentrates heavily along the outer edges of flat webbing, edge cuts are the leading cause of catastrophic web sling failure . A tiny 1/8 in notch on the edge of a web sling under load can rapidly propagate across the entire width of the web like a zipper. CRITICAL WEB SLING DEFECTS

  • EDGE CUT (Rapid Tear Hazard) EXPOSED RED CORE WARNING YARNS
  • +---------------+ +---------------+
  • | | | ==== ==== |
  • --->|\ Outer Edge | | [RED YARNS] |
  • |/ Notch | | ==== ==== |
  • +---------------+ +---------------+
  • Stress concentrates Outer cover worn away;
  • at cut apex internal core compromised
  • 5. Broken or Worn Splice Stitching

The stitch pattern (box, diamond, or multi-row stitching) in the eye loop or body splice carries 100% of the rated tension . If stitch threads are cut, frayed, unraveled, or severely abraded, the splice loses mechanical integrity.

6. Exposed Red Core Warning Yarns

Premium multi-ply synthetic web slings are manufactured with bright red internal core warning yarns. When abrasive surface wear or gouging penetrates deep enough to expose the red yarns, the rigger receives an instant visual warning that the sling has lost significant structural capacity and must be condemned.

7. Ultraviolet (UV) Light Degradation

Prolonged exposure to sunlight (UV radiation) causes photochemical degradation of synthetic polymer chains. Symptoms include severe bleaching/fading of web color, extreme stiffness or brittleness, and a powdery surface texture that flakes off when scratched with a fingernail.

8. Knots Anywhere in the Sling

Tying a knot in a synthetic web sling reduces its rated strength by 50% or more . Knots create extreme localized bend stress and friction. ASME B30.9 strictly prohibits lifting with knotted slings.

Polyester Roundslings Removal Criteria

Polyester roundslings (spansets) feature a unique design: a core made of a continuous loop of high-tenacity polyester filament yarn wrapped thousands of times inside a protective outer jacket.

Important

In a polyester roundsling, the outer tubular cover carries 0% of the load , but it provides 100% of the protection for the internal core yarns. The internal core carries 100% of the load . If the protective cover is breached, the core yarns are vulnerable to instant cutting and environmental degradation. POLYESTER ROUNDSLING CROSS-SECTION

  • +-----------------------------------------------+
  • | Outer Protective Polyester Tubular Cover |
  • | +---------------------------------------+ |
  • | | Inner Cover Barrier Layer | |
  • | | +-------------------------------+ | |
  • | | | Continuous Hank of High- | | |
  • | | | Tenacity Polyester Core Yarns | | |
  • | | +-------------------------------+ | |
  • | +---------------------------------------+ |
  • +-----------------------------------------------+
  • ASME B30.9-6 Rejection Criteria for Roundslings

Cover Penetration: Any hole, tear, cut, or abrasive puncture in the outer cover that exposes the internal white load-bearing core yarns.

Broken Internal Core Yarns: Snapped or damaged internal core filaments.

Tactile Rejection Signs: Hand examination revealing lumpiness, hard or fused spots (caused by internal friction or heat), or hollow voids where core yarns have severed and separated.

Chemical or Thermal Damage: Acid/caustic burns, melting, charring, or weld spatter on the jacket.

Fittings & Tag Defects: Bent, cracked, or deformed master links or hooks; missing or illegible tag.

Field Tactile Inspection Technique for Roundslings

Visual inspection alone cannot verify the safety of a roundsling because internal core damage may be completely hidden inside an intact cover. Riggers must perform a hands-on tactile inspection : ROUNDSLING TACTILE INSPECTION PROCEDURE

1. Layout: Lay roundsling flat on a clean surface or hold straight.

2. Squeeze & Slide: Grip the sling with both hands and slide firmly along the

entire circumference of the loop.

3. Feel for Irregularities:

- Lumpiness: Core yarn bunching or fiber rupture.

- Hollow Spots / Voids: Internal core strands have parted.

- Hard / Stiff Spots: Core yarns have fused together from heat or overload.

4. Rejection: If any irregularity is felt, REMOVE AND DESTROY SLING.

Material Comparison & Environmental Limitations

  • Property Nylon (Polyamide) Polyester (PET)
  • Primary Chemical Vulnerability Acids (Sulfuric, Nitric, Hydrochloric) Caustics / Alkalis (Sodium Hydroxide)
  • Chemical Resistance Resistant to alkalis, greases, oils Resistant to moderate acids, bleaching agents
  • Operating Temperature Range -40°F to 194°F (-40°C to 90°C) -40°F to 194°F (-40°C to 90°C)
  • Elastic Stretch at Working Load High stretch (~6% to 8%) Moderate stretch (~3% to 5%)

Moisture Absorption Absorbs moisture; loses up to 10% strength when wet Hydrophobic; retains 100% strength when wet