Study guide

2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles

NCCER Rigger Basic / Advanced

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, Qualifications & Safety Standards

1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones

2 Chapter 2: Slings & Hitches

2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency

3 Chapter 3: Sling Angles & Tension Calculations

3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment

4 Chapter 4: Sling Inspection & Removal Criteria

4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection

5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices

5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20

6 Chapter 6: Rigging Hardware Connections & Specialty Tools

6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control

7 Chapter 7: Wire Rope Construction, Inspection & Reeving

7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance

8 Chapter 8: Load Weight Estimation & Center of Gravity

8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability

9 Chapter 9: Crane Operations, Safety Devices & Communication

9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents

10 Chapter 10: Advanced Rigging Operations & Lateral Movement

10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles

11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts

11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection

12 Chapter 12: Personnel Hoisting & Site Rigging Management

12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs

2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles

Key Takeaways Explain This Topic AI

A straight vertical hitch provides 100% of the sling's rated working load limit (WLL) at a 90° angle, but provides zero rotational control and requires the pick point to be positioned directly above the center of gravity.

A choker hitch wraps around the load and passes through the opposite eye or sliding hardware, locking the sling against the load; standard choker hitch capacity is rated at 75% to 80% of vertical capacity when the choke angle is 120° or greater.

A true vertical parallel basket hitch doubles the sling parts supporting the load, providing 200% of the single-leg vertical capacity, provided both legs remain vertical (90° horizontal angle) and the bend radius satisfies D/d limits.

In 3-leg and 4-leg bridle hitches lifting rigid, non-deflecting loads, structural geometry dictates that only 2 legs typically carry the majority of the weight, requiring riggers to calculate capacity based on a 2-leg bridle.

Load stability requires that the crane hook and connection pick points be located above the load's center of gravity (CG) to prevent dangerous top-heavy load inversion during hoisting.

Last updated: August 2026

Basic Rigging Hitches: Vertical, Choker, Basket & Bridles

A rigging hitch defines the physical arrangement and geometry in which a sling connects a load to a lifting hook. The choice of hitch directly dictates the Working Load Limit (WLL) of the sling assembly, the degree of rotational control , and the overall stability of the suspended object. Under ASME B30.9 , all rigging configurations are derived from four fundamental hitches:

  • Vertical (Straight) Hitch
  • Choker Hitch
  • Basket Hitch
  • Bridle Hitch (Multi-Leg) VERTICAL CHOKER BASKET BRIDLE (2-LEG)
  • | | / \ / \
  • | | / \ / \
  • | | / \ / \
  • [LOAD] (Choke) | [LOAD] | / \
  • [LOAD] +----------+ [Point 1] [Point 2]
  • +--------------+
  • | LOAD |
  • +--------------+
  • WLL = 1.0 x Vert WLL = 0.75 x Vert WLL = 2.0 x Vert* WLL = 2 x Vert x sin(θ)
  • 1. Vertical (Straight) Hitch

A vertical hitch consists of a single sling leg connecting the crane hook directly to a single lifting attachment point on the load.

Operational Characteristics

Capacity Factor: 1.0 (100% of tagged single-leg WLL) .

Rotational Control: Zero . The load is completely free to spin, which can induce twisting stresses, unlay hand-tucked wire rope splices, or unscrew threaded attachment hardware.

Pick Point Alignment: The single attachment point must be positioned directly above the Center of Gravity (CG) . If the pick point is offset from the CG, the load will immediately tilt until the CG swings directly below the crane hook, creating severe lateral shifting.

Typical Application: Used primarily with lifting beams, spreader bars, engineered vertical pad eyes, or for hoisting symmetrical, balanced components with a dedicated center lift lug.

2. Choker Hitch

A choker hitch is formed by passing the sling body around the load and feeding one eye (or end fitting) through the opposite eye or through sliding choker hardware.

Operational Characteristics

Capacity Factor: Standard rated capacity is 0.75 to 0.80 (75% to 80% of single-leg vertical WLL) when the natural choke angle is 120° or greater.

Load Locking & Friction: The tension produced by the hoist pulls the choking eye tight against the load body, creating radial clamping friction that holds loose or cylindrical items together.

Single vs. Double Choker: A single choker hitch does not prevent the load from spinning or slipping out laterally during transit. When hoisting long structural steel beams, pipe, or rebar, riggers must use two choker hitches spaced evenly on opposite sides of the CG, often combined with a spreader beam.

Crucial Rule on Setting the Choke: Riggers must NEVER drive, pound, or force the choking eye down against the load with a hammer or mallet. Forcing the eye induces severe acute bending stress across the sling body and damages the eye splice. The choke must be permitted to assume its natural position when hoisted.

3. Basket Hitch

A basket hitch is formed by passing the sling underneath the load and attaching both eyes (or end fittings) directly to the crane hook or an overhead master link.

Operational Characteristics

Capacity Factor: Achieves 2.0 (200% of single-leg vertical WLL) ONLY when both sling legs are completely vertical and parallel (forming a 90° horizontal angle to the load).

Angular Reduction: If the legs converge toward a single hook at an angle less than 90°, the basket capacity drops significantly according to the horizontal sling angle formula:

WLL_basket = 2 × WLL_vert × sin(θ)

Load Balance Requirement: A single basket hitch provides no clamping action. The load simply rests in the cradle of the sling. If the load shifts or the CG is off-center, the load will slide through the sling belly and tip out. Double-wrap basket hitches or dual slings positioned on either side of the CG are required for unattached loads.

4. Bridle Hitches (2-Leg, 3-Leg & 4-Leg)

Bridle hitches utilize two, three, or four sling legs connected to a common master link or shackle at the crane hook, with each individual leg terminating at a separate pick point on the load.

2-Leg Bridles

Spreads the load over two attachment points, providing excellent stability along one horizontal axis.

Capacity is calculated by multiplying the sum of the leg capacities by the sine of the horizontal sling angle:

  • WLL_bridle = 2 × WLL_leg × sin(θ)
  • 3-Leg and 4-Leg Bridles: Rigid vs. Flexible Structures

A critical concept tested on NCCER Basic and Advanced exams is the mechanical behavior of rigid versus flexible structures in 3-leg and 4-leg bridle assemblies: RIGID LOAD BEHAVIOR (4-LEG BRIDLE)

  • [ Crane Hook ]
  • / | \
  • / | \
  • / | \
  • / | \
  • [Leg 1] / [Leg 2] \ [Leg 3] [Leg 4: SLACK/UNLOADED]
  • (TENSION) / (TENSION) \ (TENSION) (Carries ~0% Load)
  • / | \
  • v v v
  • +-------------------------+
  • | RIGID STEEL CHASSIS | <-- Three points define a plane;

+-------------------------+ the 4th leg carries almost nothing!

Statistically Indeterminate Loading: In a 4-leg bridle lifting a rigid, non-deflecting structure (e.g., heavy steel machinery skid, reinforced precast concrete panel, thick machine base), geometric tolerance differences of mere fractions of an inch between sling lengths or lug heights will cause only two diagonally opposed legs (or at most three legs) to support virtually the entire weight.

The Golden Rule for 4-Leg Bridles on Rigid Loads: When calculating sling sizing for a 4-leg bridle lifting a rigid object, always assume that only 2 legs carry the entire load weight :

Required Leg WLL = Total Load Weight / (2 × sin(θ))

The remaining two legs serve strictly to balance the load and maintain level orientation.

Flexible Loads: For flexible loads (e.g., thin steel plates, wire mesh baskets, flexible tanks) that can deflect and equalize sling tension, all 4 legs may be considered to share load proportionally.

Comparative Hitch Matrix

  • Hitch Configuration Capacity Multiplier Rotational Control Minimum Pick Points Center of Gravity Sensitivity
  • Vertical 1.0 (100%) None 1 High (Must be directly under hook)
  • Choker (120°+) 0.75 - 0.80 (75-80%) Moderate (Frictional) 1 Moderate (Gripping prevents tilt)
  • Basket (True 90°) 2.0 (200%) Low 1 cradle (2 legs) High (Cradle can slide if tilted)
  • 2-Leg Bridle (60°) 1.732 (2 x sin 60°) High (Single Axis) 2 Moderate (Hook over CG)
  • 4-Leg Bridle (Rigid) 2.0 x sin(θ) (2 legs) Maximum (Dual Axis) 4 Low (Self-stabilizing)
  • Load Stability: Center of Gravity & Pick Point Geometry

Load stability depends on the spatial relationship between the attachment pick points and the Center of Gravity (CG) :

Stable Equilibrium: Pick points are located ABOVE the center of gravity. If the load is tilted by wind or dynamic crane movement, gravity acts as a restoring force, swinging the load back to level.

Unstable Equilibrium (Top-Heavy Inversion): If pick points are located BELOW the center of gravity (e.g., choking the bottom flange of a tall, heavy electrical transformer), the load is top-heavy. As soon as the load is hoisted, any disturbance will cause the top-heavy mass to rapidly flip 180° upside down, resulting in lost rigging control, severed slings, or catastrophic impact.