Study guide
2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh
NCCER Rigger Basic / Advanced
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, Qualifications & Safety Standards
1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones
2 Chapter 2: Slings & Hitches
2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency
3 Chapter 3: Sling Angles & Tension Calculations
3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment
4 Chapter 4: Sling Inspection & Removal Criteria
4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection
5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices
5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20
6 Chapter 6: Rigging Hardware Connections & Specialty Tools
6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control
7 Chapter 7: Wire Rope Construction, Inspection & Reeving
7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance
8 Chapter 8: Load Weight Estimation & Center of Gravity
8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability
9 Chapter 9: Crane Operations, Safety Devices & Communication
9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents
10 Chapter 10: Advanced Rigging Operations & Lateral Movement
10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles
11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts
11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection
12 Chapter 12: Personnel Hoisting & Site Rigging Management
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs
2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh
Key Takeaways Explain This Topic AI
Synthetic web slings are lightweight and non-marring, but nylon is severely degraded by acids while polyester is degraded by alkalis (caustics); both have standard operating limits of 194°F (90°C).
Polyester roundslings feature an endless load-bearing core of synthetic fibers encased in a protective seamless woven jacket, utilizing standardized industry color-coding for working load limit (WLL) identification.
Wire rope slings fabricated with a mechanical Flemish eye and swaged metal sleeve achieve 90% to 95% nominal rope efficiency, significantly outperforming hand-tucked splices (70% to 80% efficiency) which can unwind under load rotation.
Only Grade 80, Grade 100, or Grade 120 alloy steel chain is permitted for overhead lifting under ASME B30.9 and OSHA regulations; carbon steel chains (Grades 30, 43, 70) are strictly prohibited.
Metal mesh slings provide superior resistance to abrasive, hot (up to 550°F), and sharp-edged loads, conforming tightly to cylindrical shapes without permanent set.
Last updated: August 2026
Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh
In industrial rigging, slings serve as the critical mechanical connection between the crane hook and the load. Choosing the correct sling material and construction is fundamental to ensuring safety, load stability, and regulatory compliance. Under ASME B30.9 (Slings) and OSHA 29 CFR 1926.251 (Rigging Equipment for Material Handling) , slings are categorized into five distinct classifications based on their mechanical properties, load-bearing architecture, and environmental resistance.
Selecting the improper sling type can lead to sudden catastrophic failure from chemical degradation, thermal damage, cutting on sharp corners, or structural unlaying. This section provides a thorough technical breakdown of each sling type, establishing the operational criteria required for NCCER Basic and Advanced Rigger certification.
1. Synthetic Web Slings
Synthetic web slings are manufactured from woven synthetic yarns—predominantly nylon (polyamide) or polyester (polyethylene terephthalate) . They are highly flexible, lightweight, non-conductive, and non-marring, making them ideal for handling delicate machinery, polished shafts, finished architectural components, and fragile assemblies.
Web Sling Configurations (Types I through VI)
Type Designation Configuration Description & Typical Application
Type I (Choker) Triangle & Choker (TC) Features a dedicated steel/aluminum triangle fitting on one end and a slotted choker fitting on the other; designed specifically for choker hitches.
Type II (Triangle) Triangle & Triangle (TT) Has identical metal triangle fittings at both ends; used strictly in vertical and basket hitch configurations.
Type III (Flat Eye) Eye & Eye (EE) Eyes are sewn flat in the same plane as the sling body; highly versatile across vertical, choker, and basket hitches.
Type IV (Twisted Eye) Eye & Eye (EE) Eyes are turned at a 90° angle to the sling body; seats naturally on crane hooks and improves choker hitch geometry.
Type V (Endless) Endless / Grommet (EN) Continuous loop of flat webbing; wear points can be shifted continuously along the circumference to extend service life.
Type VI (Reversed Eye) Return Eye (RE) Slings feature wear pads sewn along both faces and eyes oriented laterally; common in severe heavy-duty duty cycles.
Chemical Vulnerabilities & Temperature Thresholds
The fundamental exam distinction between nylon and polyester lies in their chemical resistance:
Nylon: Severely degraded and dissolved by acids (hydrochloric, sulfuric, nitric). However, nylon is highly resistant to alkalis (caustics, ammonia, lime, sodium hydroxide), hydrocarbons, and dry-cleaning solvents.
Polyester: Severely degraded by alkalis / caustics (hot sodium hydroxide, concentrated ammonium compounds). However, polyester is highly resistant to acids and bleaching agents.
Polypropylene: Highly resistant to both acids and alkalis, but possesses very low mechanical strength and a low melting point; rarely used except in specialized marine/plating environments.
Operating Temperature Limits: Standard nylon and polyester web slings have an operating temperature range of -40°F to 194°F (-40°C to 90°C) . Exposure to temperatures exceeding 194°F permanently breaks down synthetic polymers.
UV & Core Inspection: Exposure to direct sunlight causes ultraviolet (UV) degradation, resulting in color fading and brittleness. Web slings are manufactured with internal red core warning yarns; when surface yarns wear through and expose red warning yarns, the sling must be removed from service immediately.
2. Polyester Roundslings
Polyester roundslings consist of a continuous, endless loop of high-tenacity polyester core yarns enclosed within a double-wall seamless woven tubular polyester jacket. +-------------------------------------------------------------------------+
- | Outer Woven Polyester Jacket (Carries 0% Load / Protects Core) |
- | +-------------------------------------------------------------------+ |
- | | Inner Core Yarns (Continuous Polyester Loop: Carries 100% Load) | |
- | +-------------------------------------------------------------------+ |
- +-------------------------------------------------------------------------+
- Structural Mechanics
Core Load Sharing: The inner polyester yarn core carries 100% of the suspended load weight .
Jacket Protection: The outer tubular jacket carries zero load . Its sole function is to protect the internal load-bearing core from UV rays, abrasion, dirt, and mechanical cutting.
Flexibility & Pliability: Roundslings mold tightly to irregular contours, providing exceptional contact surface area and preventing load slippage.
Standardized WIC/WSTDA Color Coding
While the manufacturer's identification tag is the only legal authority for working load limits, industry standards (Web Sling & Tie Down Association) establish universal color coding for polyester roundslings:
- Sling Color Rated Vertical WLL Rated Choker WLL Rated Basket WLL (90° Legs)
- Purple 2,600 lbs 2,080 lbs 5,200 lbs
- Green 5,300 lbs 4,240 lbs 10,600 lbs
- Yellow 8,400 lbs 6,720 lbs 16,800 lbs
- Tan 10,600 lbs 8,480 lbs 21,200 lbs
- Red 13,200 lbs 10,560 lbs 26,400 lbs
- White 16,800 lbs 13,440 lbs 33,600 lbs
- Blue 21,200 lbs 16,960 lbs 42,400 lbs
- Orange 31,000+ lbs 24,800+ lbs 62,000+ lbs
- 3. Wire Rope Slings
Wire rope slings provide high tensile strength, moderate flexibility, and excellent resistance to abrasion and fatigue. Standard rigging slings are constructed from 6x19 or 6x36 classification wire ropes fabricated from Extra Improved Plow Steel (EIPS) or Extra Extra Improved Plow Steel (EEIPS) with an Independent Wire Rope Core (IWRC) .
Flemish Eye vs. Hand-Tucked Splice
End terminations dictate the ultimate strength efficiency of a wire rope sling:
Mechanical Flemish Eye (Swaged Sleeve): The wire rope strands are split into two groups, looped back in opposite directions to re-form the eye naturally (the Flemish loop), and secured with a swaged steel or aluminum mechanical sleeve pressed under high hydraulic pressure.
Efficiency: Achieves 90% to 95% of the nominal catalog strength of the wire rope.
Safety Advantage: If the swaged sleeve fails under load, the intertwined Flemish eye still retains up to 70% of its ultimate strength, preventing immediate dropped loads.
Hand-Tucked (Hand-Spliced) Eye: Strands are unlaid and manually tucked back into the main body of the wire rope without a metal sleeve.
Efficiency: Achieves only 70% to 80% efficiency.
Critical Prohibition: Hand-tucked splices can easily untuck and pull apart if the load is allowed to rotate during hoisting. They are strictly prohibited in single-point picks where rotation is possible.
Multi-Part and Braided Wire Rope Slings
Multi-Part / Braided Slings: Fabricated by braiding 3, 6, 8, or 9 smaller wire ropes together. This delivers ultra-high flexibility, resists kinking, minimizes rotation, and conforms tightly around cylindrical vessels.
Thermal Limits: Wire rope slings with an IWRC can operate up to 400°F (204°C) without capacity reduction. Wire ropes with a fiber core (FC) or synthetic internal components are limited to 180°F (82°C) .
4. Alloy Steel Chain Slings
Alloy steel chain slings are the most durable, rugged, and heat-resistant slings available. Under ASME B30.9 and OSHA 1926.251(b)(1), only alloy steel chains are certified for overhead lifting.
- Certified Chain Grades vs. Prohibited Chains
- | Chain Grade | Overhead Lifting Permitted? | Identification Markings | Mechanical Properties |
- |:---|:---:|:---:|:---||
| Grade 30 (Proof Coil) | NO (STRICTLY PROHIBITED) | 3, 30, PC | Low-carbon steel; elongates and snaps under shock loading. |
| Grade 43 (High Test) | NO (STRICTLY PROHIBITED) | 4, 43, HT | Carbon steel for binding and tie-downs; brittle under impact. |
| Grade 70 (Transport) | NO (STRICTLY PROHIBITED) | 7, 70, G7 | Heat-treated carbon steel for trucking/cargo securement; lacks elongation properties required for overhead lifting. |
| Grade 80 (Alloy Steel) | YES (APPROVED) | 8, 80, 800, G8 | Alloy steel with minimum 20% elongation before fracture; standard overhead lifting grade. |
| Grade 100 (Premium Alloy) | YES (APPROVED) | 10, 100, G10 | Approx. 25% higher WLL than Grade 80 for identical link size; excellent strength-to-weight ratio. |
| Grade 120 (Ultra Alloy) | YES (APPROVED) | 12, 120 | High-performance square/profile links with superior fatigue and bending resistance. |
Thermal Derating for Alloy Chain Slings
Alloy chain slings excel in foundries, steel fabrication, and extreme heat environments, but must be derated when exposed to high temperatures:
Up to 400°F (204°C): 100% capacity (no reduction).
400°F to 500°F: 10% capacity reduction (90% WLL).
500°F to 600°F: 20% capacity reduction (80% WLL).
600°F to 700°F: 30% capacity reduction (70% WLL).
700°F to 800°F: 40% capacity reduction (60% WLL).
800°F to 900°F: 50% capacity reduction (50% WLL).
Above 1,000°F (538°C): PERMANENT REMOVAL FROM SERVICE. The chain link heat treatment is permanently destroyed.
5. Metal Mesh Slings
Metal mesh slings (also known as wire mesh slings) are constructed from high-tensile carbon steel or stainless steel wire mesh fabric joined to heavy-duty steel end handles (triangle and choker fittings).
Key Characteristics
Abrasive & Hot Loads: Ideal for handling hot steel coils, raw billets, rough castings, and sharp-edged structural plates.
Thermal Range: Standard carbon steel mesh slings operate safely up to 550°F (288°C) without derating. Stainless steel mesh can operate up to 1,000°F under manufacturer guidance.
Load Conformation: The wide bearing surface (up to 12 inches or more) distributes weight evenly across soft or polished metal surfaces without gouging, while resisting edge cuts that would instantly sever synthetic webbing.
Comprehensive Sling Selection Matrix
- Sling Type Cut Resistance Temp Range Acid Resistance Alkali Resistance Weight / Rigging Handling
- Nylon Web Poor -40°F to 194°F POOR (Degrades) GOOD (Resistant) Ultra-Lightweight / Soft
- Polyester Web / Round Poor -40°F to 194°F GOOD (Resistant) POOR (Degrades) Ultra-Lightweight / Flexible
- Wire Rope (IWRC) Good -40°F to 400°F Moderate Moderate Moderate / Stiff
- Alloy Chain (Gr 80/100) Excellent -40°F to 1,000°F* Excellent Excellent Heavy / Extremely Rugged
- Metal Mesh (Steel) Excellent -40°F to 550°F Moderate Excellent Moderate / Wide Surface