Study guide
7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria
NCCER Rigger Basic / Advanced
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, Qualifications & Safety Standards
1.1 NCCER Rigger Certification Structure, Exam Format & Testing Policies 1.2 OSHA 29 CFR 1926 Subpart CC & Qualified Rigger Requirements 1.3 ASME B30 Standards Framework for Rigging & Lifting 1.4 Job-Site Safety, Hazard Identification & Exclusion Zones
2 Chapter 2: Slings & Hitches
2.1 Types of Slings: Synthetic, Wire Rope, Alloy Chain & Metal Mesh 2.2 Basic Rigging Hitches: Vertical, Choker, Basket & Bridles 2.3 Choker Hitch Reductions & Choke Angle Factors 2.4 Basket Hitch Configurations, D/d Ratios & Efficiency
3 Chapter 3: Sling Angles & Tension Calculations
3.1 Principles of Sling Leg Angle & Horizontal Sling Angles 3.2 Sling Tension Formulas & Worked Calculation Examples 3.3 Critical Sling Angles & The 30-Degree Prohibition 3.4 Symmetrical vs. Non-Symmetrical Bridle Leg Tension & Center of Gravity Alignment
4 Chapter 4: Sling Inspection & Removal Criteria
4.1 Wire Rope Sling Inspection & ASME B30.9 Removal Criteria 4.2 Synthetic Web & Round Sling Inspection & Removal Criteria 4.3 Alloy Steel Chain Sling Inspection & Wear Limits 4.4 Metal Mesh & High-Performance Synthetic Slings Inspection
5 Chapter 5: Rigging Hardware & Below-the-Hook Lifting Devices
5.1 Shackles: Types, Application, Loading & ASME B30.26 Inspection 5.2 Eyebolts, Swivel Hoist Rings & Angular Loading Deratings 5.3 Hooks: Types, ASME B30.10 Inspection Criteria & Latch Requirements 5.4 Below-the-Hook Lifting Devices: Spreader Bars, Equalizer Beams & ASME B30.20
6 Chapter 6: Rigging Hardware Connections & Specialty Tools
6.1 Turnbuckles, Rigging Links & Master Rings 6.2 Wire Rope Clips: U-Bolt vs. Fist Grip & Installation Efficiency 6.3 Wedge Sockets & Wire Rope End Terminations 6.4 Snatch Blocks, Sheaves & Lead Line Calculations 6.5 Hoisting & Jacking Equipment: Chain Hoists, Lever Hoists, Winches & Gantries 6.6 Rigging Knots, Fiber Rope & Rope Work for Load Control
7 Chapter 7: Wire Rope Construction, Inspection & Reeving
7.1 Wire Rope Components, Core Types & Lay Classifications 7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria 7.3 Reeving Patterns, Parts of Line & Mechanical Advantage 7.4 Hoist Drum Capacity, Fleet Angle & Minimum Wraps 7.5 Wire Rope Handling, Installation, Storage & Field Maintenance
8 Chapter 8: Load Weight Estimation & Center of Gravity
8.1 Material Densities & Basic Volume Formulas for Riggers 8.2 Load Weight Calculations for Symmetrical & Composite Shapes 8.3 Determining Center of Gravity (CG) for Regular & Irregular Loads 8.4 Center of Gravity Above vs. Below Pick Points & Load Stability
9 Chapter 9: Crane Operations, Safety Devices & Communication
9.1 Mobile Crane Types, Quadrants of Operation & Boom Geometry 9.2 Crane Safety Devices & Operational Aids (A2B, LMI, Level Indicators) 9.3 Standard ASME B30.5 Hand Signals & Radio Communication Protocols 9.4 Power Line Clearances, Weather Limits & Ground Bearing Conditions 9.5 Telescopic Boom Attachments: Swing-Away Extensions, Jibs, Erecting & Stowing 9.6 Crane Assembly & Disassembly: Lattice Boom, Counterweights & the A/D Director 9.7 Crane Safety Devices Out of Service, Emergency Procedures & Responding to Crane Incidents
10 Chapter 10: Advanced Rigging Operations & Lateral Movement
10.1 Lateral Load Movement: Incline Planes, Friction & Required Line Pull 10.2 Drifting Loads Between Two Hoists & Load Transfer Principles 10.3 Inverting, Rolling & Turning Heavy Loads 10.4 Advanced Cribbing, Blocking & Jacking Operations 10.5 Rigging Piping, Pipe Spools & Rebar Bundles
11 Chapter 11: Complex Lift Planning & Multi-Crane Lifts
11.1 Lift Plan Components, Roles & Responsibilities 11.2 Critical Lift Criteria & Engineering Analysis 11.3 Multi-Crane Tandem Lifts: Load Distribution & Synchronization 11.4 Crane Load Chart Deductions: Net vs. Gross Capacity Calculations 11.5 Reading Mobile Crane Load Charts: Configurations, Range Diagrams & Chart Selection
12 Chapter 12: Personnel Hoisting & Site Rigging Management
12.1 OSHA 29 CFR 1926.1431 Personnel Hoisting Regulations & Derating 12.2 Suspended Personnel Platforms: Design, Proof Testing & Trial Lift 12.3 Tagline Safety, Load Control & Line-of-Fire / Pinch-Point Hazards 12.4 Rigging Storage, Maintenance, Documentation & Periodic Inspection Logs
7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria
Key Takeaways Explain This Topic AI
Under ASME B30.5 and OSHA 1926.1413, standard running wire ropes must be removed from service if there are 6 randomly distributed broken wires in one rope lay, or 3 broken wires in one strand in one rope lay.
Rotation-resistant wire ropes are governed by much stricter retirement criteria: 2 randomly distributed broken wires in 6 rope diameters, or 4 broken wires in 30 rope diameters.
Standing ropes (boom pendants) require immediate retirement upon finding 3 broken wires in one rope lay in sections beyond end connections, or 2 broken wires at an end termination.
Any single valley break (a broken wire occurring at the contact point between two adjacent strands) indicates internal core failure or inter-strand notching and mandates immediate removal from service.
Caliper measurements must always be taken crown-to-crown across the maximum outer diameter; nominal diameter reduction exceeding 5% (or 1/3 the original diameter of outer wires) requires immediate rope retirement.
Last updated: August 2026
7.2 Crane Hoist Wire Rope Inspection & Retirement Criteria
Wire rope inspection is one of the most critical safety responsibilities of the rigger, crane inspector, and competent person. Under OSHA 29 CFR 1926.1412 , OSHA 29 CFR 1926.1413 , and ASME B30.5 , crane wire ropes must undergo three rigorous tiers of inspection:
Shift / Daily Visual Inspection (1926.1412(d)): Conducted prior to each shift, observing all running ropes, standing pendants, and end connections for obvious damage, kinks, broken wires, or core protrusion.
Monthly Documented Inspection (1926.1412(e)): A documented visual inspection signed and dated by a certified inspector or competent person.
Annual / Comprehensive Inspection (1926.1412(f)): A complete, highly detailed examination covering the entire length of rope, critical wear points over sheaves, drum crossover zones, end fittings, and caliper diameter logs.
When a wire rope reaches any single regulatory retirement threshold, it must be immediately removed from service and scrapped. In rigging, there is zero tolerance for "running a damaged rope until the shift ends."
1. Broken Wire Removal Criteria: The Core Regulatory Thresholds
Broken wires are the primary indicator of mechanical fatigue and abrasive wear. The allowable number of broken wires depends strictly on the rope function (running vs. standing) and rope construction (standard 6/8-strand vs. rotation-resistant). +-----------------------------------------------------------------------------------+
- | SUMMARY OF BROKEN WIRE RETIREMENT THRESHOLDS |
- +-----------------------------------------------------------------------------------+
- | 1. STANDARD RUNNING ROPES (ASME B30.5 / OSHA 1926.1413): |
- | * 6 randomly distributed broken wires in ONE rope lay, OR |
- | * 3 broken wires in ONE strand in ONE rope lay. |
- | |
- | 2. ROTATION-RESISTANT RUNNING ROPES (STRICTER THRESHOLDS): |
- | * 2 randomly distributed broken wires in SIX (6) rope diameters, OR |
- | * 4 randomly distributed broken wires in THIRTY (30) rope diameters. |
- | |
- | 3. STANDING ROPES / BOOM PENDANTS: |
- | * 3 broken wires in ONE rope lay in sections beyond end connections, OR |
- | * 2 broken wires at an END CONNECTION (socket, swaged sleeve, or thimble). |
- | |
- | 4. VALLEY BREAKS (ANY ROPE TYPE): |
- | * 1 VALLEY BREAK (wire break between strands) = IMMEDIATE REMOVAL! |
- +-----------------------------------------------------------------------------------+
- Defining "One Rope Lay"
A rope lay is the precise longitudinal distance measured along the rope in which one individual strand makes one complete 360-degree helical revolution around the central core. In a standard 6-strand wire rope, one rope lay equals approximately 6.5 to 8 times the nominal rope diameter . +-----------------------------------------------------------------------------------+
- | MEASURING ONE ROPE LAY LENGTH |
- +-----------------------------------------------------------------------------------+
- | |
- | |<-------------------------- ONE ROPE LAY LENGTH ------------------------------>| |
- | | | |
- | [Strand A]=====\ /=====[Strand A] |
- | \=====[Strand A completes 360° helical wrap]=======/ |
- | |
- | Formula: One Rope Lay ≈ Nominal Rope Diameter x 6.5 to 8.0 |
- | Example: 1" Diameter Rope -> One Rope Lay = ~6.5" to 8.0" of linear rope length. |
- +-----------------------------------------------------------------------------------+
Rope Classification & Application ASME B30.5 / OSHA Retirement Threshold Inspection Reference Baseline
Standard Running Rope (6-strand / 8-strand) 6 broken wires randomly distributed across all strands Measured within One Rope Lay
- Standard Running Rope (Concentrated) 3 broken wires in one single strand Measured within One Rope Lay
- Rotation-Resistant Rope (Short Span) 2 broken wires randomly distributed Measured within 6 Rope Diameters
- Rotation-Resistant Rope (Long Span) 4 broken wires randomly distributed Measured within 30 Rope Diameters
- Standing Rope / Pendant (Main Body) 3 broken wires in one lay Anywhere between end terminations
- Standing Rope / Pendant (End Fitting) 2 broken wires Adjacent to or at the end connection
Valley Break (All Rope Types) 1 broken wire located in the valley between strands Anywhere along the rope length
2. Valley Breaks & Internal Core Failure
A valley break occurs when an individual wire fractures at the contact interface between two adjacent strands (in the valley or groove of the rope), rather than on the exposed outer crowning surface of a strand. +-----------------------------------------------------------------------------------+
- | CROWN BREAK VS. VALLEY BREAK |
- +-----------------------------------------------------------------------------------+
- | |
- | ( Crown Break ) --> Fractures on outer crown due to abrasive scrubbing |
- | \ or normal reverse bending fatigue over sheaves. |
- | /---------\ |
- | / Strand \ /---------\ |
- | | 1 |=====| Strand | |
- | \ / ^ \ 2 / |
- | \---------/ | \-----/ |
- | | |
- | ( VALLEY BREAK ) --> Fractures DEEP between strands due to |
- | internal notching, lack of lubricant, or |
- | internal core breakdown / collapse! |
- | |
- +-----------------------------------------------------------------------------------+
- Why a Single Valley Break Mandates Immediate Scrapping
Outer crown breaks are visible, predictable, and develop gradually as outer wires wear down. Valley breaks, however, indicate severe internal strand notching, internal core failure, or catastrophic loss of internal lubrication . When one valley break is visible on the surface, multiple hidden wires inside the core are typically already fractured. Under ASME B30.30 and OSHA 1926.1413, a single (1) valley break requires immediate removal from service .
3. Caliper Measurement Technique & Diameter Reduction Limits
Wire rope diameter naturally decreases over its service life due to three distinct factors: external abrasion of outer wires, internal wire-to-wire wear, and normal core stretching/settling. When diameter loss exceeds regulatory limits, the rope's ultimate tensile strength is severely compromised.
Caliper Crown-to-Crown Measurement Protocol
To obtain an accurate measurement, the rigger must use a precision dial or digital caliper and measure across the outermost crowns of opposite strands . +-----------------------------------------------------------------------------------+
- | CORRECT CALIPER MEASUREMENT TECHNIQUE |
- +-----------------------------------------------------------------------------------+
- | |
- | [CORRECT: CROWN-TO-CROWN] [INCORRECT: VALLEY-TO-VALLEY] |
- | |
- | | Caliper Jaw | | Caliper Jaw | |
- | | | |
- | v v |
- | ( CROWN ) ( VALLEY ) |
- | /-------------\ /-------------\ |
- | | Strand 1 | | Strand 1 | |
- | | | | | |
- | | Strand 4 | | Strand 4 | |
- | \-------------/ \-------------/ |
- | ( CROWN ) ( VALLEY ) |
- | ^ ^ |
- | | | |
- | | Caliper Jaw | | Caliper Jaw | |
- | |
- | >> Measures TRUE maximum outer diameter! >> Gives FALSE undersized reading! |
- +-----------------------------------------------------------------------------------+
- The 5% Diameter Reduction Threshold
Under ASME B30.5 and OSHA 1926.1413, a wire rope must be retired if its measured crown-to-crown diameter decreases by more than 5% of its original nominal diameter , or if the outside individual wires have worn away by more than one-third (1/3) of their original diameter . +-----------------------------------------------------------------------------------+
- | MATHEMATICAL DIAMETER REDUCTION CALCULATION |
- +-----------------------------------------------------------------------------------+
- | Formula: Maximum Permissible Reduction = Nominal Diameter x 0.05 |
- | Retirement Cutoff Diameter = Nominal Diameter - (Nominal Diameter x 0.05)|
- | |
- | Example 1: 3/4" (0.750") Nominal Diameter Rope |
- | * 5% Allowable Loss = 0.750" x 0.05 = 0.0375" |
- | * Minimum Allowable Diameter = 0.750" - 0.0375" = 0.7125" (23/32") |
- | * If caliper reads 0.708" -> CONDEMN AND RETIRE ROPE IMMEDIATELY! |
- | |
- | Example 2: 1-1/8" (1.125") Nominal Diameter Rope |
- | * 5% Allowable Loss = 1.125" x 0.05 = 0.0562" |
- | * Minimum Allowable Diameter = 1.125" - 0.0562" = 1.0688" |
- | * If caliper reads 1.055" -> CONDEMN AND RETIRE ROPE IMMEDIATELY! |
- +-----------------------------------------------------------------------------------+
- 4. Severe Structural Defects (Immediate Condemnation)
In addition to broken wires and diameter reduction, any of the following physical or metallurgical defects requires immediate condemnation of the wire rope: +-----------------------------------------------------------------------------------+
- | CRITICAL STRUCTURAL DEFECT TAXONOMY |
- +-----------------------------------------------------------------------------------+
- | 1. KINKING: |
- | A permanent loop pulled tight, causing severe structural distortion of core |
- | and strands. Kinked ropes CANNOT be straightened or repaired! |
- | |
- | 2. BIRDCAGING: |
- | Outer strands forcibly unlaying and expanding outward into a cage-like cage |
- | due to sudden shock load release or tight sheave passage. |
- | |
- | 3. DOGLEGS: |
- | A permanent localized sharp bend or kink caused by mechanical impact or |
- | pinching across an unpadded structural beam edge. |
- | |
- | 4. CORE PROTRUSION / HERNIATION: |
- | The IWRC or Fiber Core bursting out between outer strands due to shock loading.|
- | |
- | 5. HEAT DAMAGE & ELECTRIC ARC STRIKES: |
- | Localized melting, weld spatter, torch burns, or discoloration from lightning |
- | or welding ground faults. Microstructure is embrittled; subject to snap. |
- | |
- | 6. SEVERE CORROSION PITTING: |
- | Deep rust pitting that eats away cross-sectional wire area and locks strands. |
- +-----------------------------------------------------------------------------------+
- Real-World Exam Application Scenario
Scenario: During a monthly crane inspection, a competent rigger examines a 7/8" (0.875") 6x25 IWRC Right Regular Lay hoist rope on a 50-ton mobile crane. Over a measured distance of 6.0 inches (one rope lay), the rigger discovers:
4 broken wires randomly distributed across three strands.
1 broken wire found tucked deep between strands (valley break).
Crown-to-crown caliper measurement of 0.825".
Analysis: The rigger must condemn and retire the rope immediately based on two independent rejection criteria :
Valley Break Violation: Finding even 1 valley break is an automatic, non-negotiable retirement trigger under ASME B30.5 and OSHA 1926.1413.
Diameter Reduction Violation: The allowable 5% reduction on a 7/8" (0.875") rope is 0.875 x 0.05 = 0.04375", setting the minimum allowable diameter at 0.83125". The measured diameter of 0.825" represents a 5.71% reduction, exceeding the legal limit.