Study guide
7.7 Point-of-Care Testing Procedures
NCCT National Certified Phlebotomy Technician NCPT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: NCPT Exam Overview, Eligibility & Study Strategy
1.1 Exam Facts, Format & Scoring 1.2 Eligibility Pathways, Application & Retake Policy 1.3 Blueprint Study Strategy & Credential Roadmap
2 Chapter 2: Infection Control & Safety (Domain 1 — 15%)
2.1 The Chain of Infection & Breaking Transmission 2.2 Hand Hygiene & Glove Use Standards 2.3 PPE Selection & Donning/Doffing Protocols 2.4 Sharps Safety & Safety-Device Activation 2.5 Isolation Precautions & Biohazard Spill Response 2.6 Cleaning & Disinfecting Equipment and Work Surfaces 2.7 OSHA Bloodborne Pathogens & Post-Exposure Management
3 Chapter 3: Equipment Selection (Domain 2A — 12 items)
3.1 Equipment Quality Verification & Allergy Alternatives 3.2 Venipuncture Equipment & Needle Anatomy 3.3 Winged Infusion Sets (Butterfly) & Syringe Systems 3.4 Capillary Equipment & Lancet Depth Selection 3.5 Bandaging Materials & Post-Collection Patient Care
4 Chapter 4: Patient & Site Preparation (Domain 2B — 13 items)
4.1 Patient Identification Standards 4.2 Requisition Review, Order Clarification & Documentation 4.3 Physiological Factors & Basal State Patient Prep 4.4 Patient Education & Therapeutic Communication 4.5 Venous Site Selection & Prohibited Sites 4.6 Antiseptic Selection & Tourniquet Application
5 Chapter 5: Routine Venipuncture Procedure (Domain 3 — 30%)
5.1 Prioritizing Collections: STAT, Timed & Routine 5.2 Routine Venipuncture: Preparation & Patient Assessment 5.3 Needle Insertion, Collection & Post-Puncture Care 5.4 CLSI Order of Draw & Tube Additive Mechanics 5.5 Fill Volumes, Inversions & Matching Tests to Tubes
6 Chapter 6: Special Patient Populations & Precautions
6.1 Precautions for Patients with Medical Conditions 6.2 Adapting Collection for Pediatric Patients 6.3 Geriatric, Dialysis & Other Difficult-Draw Populations
7 Chapter 7: Capillary & Special Collections
7.1 Capillary Blood Composition, Indications & Contraindications 7.2 Fingerstick Site Selection, Warming & Technique 7.3 CLSI GP42 Capillary Order of Draw & Blood Gas Collection 7.4 Neonatal Heelstick & Newborn Metabolic Screening 7.5 Blood Culture Collection Protocols & Timing 7.6 Therapeutic Drug Monitoring & Glucose Tolerance Testing 7.7 Point-of-Care Testing Procedures
8 Chapter 8: Specimen Handling, Processing & Non-Blood Specimens
8.1 Specimen Mixing & Mandatory Bedside Labeling 8.2 Assessing Specimen Suitability & Rejection Criteria 8.3 Temperature-, Light- & Time-Sensitive Specimen Handling 8.4 Specimen Processing: Centrifugation, Aliquoting & Storage 8.5 Non-Blood Specimen Collection & Patient Instruction 8.6 Processing Non-Blood Specimens & Routing to Laboratory Departments
9 Chapter 9: Collection Complications & Troubleshooting (Domain 4 — 15%)
9.1 Vasovagal Syncope: Recognition & Emergency Response 9.2 Seizures, Nausea, Petechiae & Allergic Reactions 9.3 Nerve Injury, Hematomas & Accidental Arterial Puncture 9.4 Technical Troubleshooting & the Two-Attempt Rule 9.5 Hemolysis & Hemoconcentration 9.6 IV Contamination & Analytical Interference
10 Chapter 10: Law, Ethics & Regulatory Standards (Domain 5 — 15%)
10.1 Civil Law, Torts, Negligence & Standard of Care 10.2 Patient Consent, the AHA Bill of Rights & Refusal 10.3 HIPAA Privacy Rule & Permitted Disclosures 10.4 Forensic Chain of Custody & Blood Alcohol Collection 10.5 Workplace Safety Regulation: OSHA, SDS, NFPA & Fire Response 10.6 CLIA ’88, Quality Assurance & Quality Control 10.7 Reportable Incidents, Risk Management & Error Disclosure
11 Chapter 11: Comprehensive Review & Clinical Practice Scenarios
11.1 Critical Order of Draw & Additive Reference Summary 11.2 Clinical Decision Scenarios & Troubleshooting Drills 11.3 Exam-Day Strategy & Professional Recertification
7.7 Point-of-Care Testing Procedures
Key Takeaways Explain This Topic AI
Point-of-care testing is performed at or near the patient, producing results in minutes without transport to a central laboratory.
Common POCT includes glucose meters, urinalysis dipsticks, pregnancy tests, hemoglobin, INR, and rapid infectious disease tests.
Most POCT is CLIA-waived, but waived status removes neither the requirement for a CLIA certificate nor the operator training obligation.
Quality control is run per manufacturer instructions and at each new lot number, and results are documented before patient testing.
A glucose meter result that conflicts with the clinical picture is confirmed by a laboratory glucose, not repeated on the same meter.
Last updated: August 2026
- 7.7 Point-of-Care Testing Procedures
- Point-of-Care Testing (POCT) Protocols
Point-of-Care Testing (POCT) —also known as bedside testing , near-patient testing , or decentralized testing —refers to diagnostic testing conducted at or near the site of patient care, outside the physical central laboratory. POINT-OF-CARE TESTING (POCT) HIGHLIGHTS
- ┌────────────────────────────────────────────────────────────────────────┐
- │ CLINICAL ADVANTAGES: │
- │ • Drastically reduces Turnaround Time (TAT) from hours to minutes. │
- │ • Enables rapid clinical triage and real-time medical interventions in │
- │ high-acuity settings (ED, ICU, Trauma Bay, Operating Room). │
- │ • Requires minimal blood specimen volume (single capillary drop). │
- ├────────────────────────────────────────────────────────────────────────┤
- │ COMMON POCT ANALYTES: │
- │ • Capillary Blood Glucose (bedside glucometers). │
- │ • Arterial / Venous Blood Gases (i-STAT, handheld analyzers). │
- │ • Coagulation: Prothrombin Time / INR (CoaguChek). │
- │ • Cardiac Biomarkers: Rapid Troponin I / T, CK-MB, BNP. │
- │ • Urinalysis: Automated dipstick chemistry and pregnancy (hCG). │
- │ • Infectious Disease: Rapid Strep A, Influenza A/B, COVID-19 antigen. │
- └────────────────────────────────────────────────────────────────────────┘
- Standardized POCT Operating Workflow for Phlebotomists
Operator Identification & Barcode Security:
Phlebotomists must log into the POCT device using their unique operator ID badge barcode. Never share passwords or scan another staff member's badge; all testing actions are audited for quality and competency tracking.
Positive Patient Identification:
Scan the patient's hospital identification wristband barcode and verify two independent identifiers (full legal name and date of birth) verbally with the patient.
Quality Control Verification:
The operator must verify that daily liquid Quality Control (high and low levels) has been run and passed on the analyzer before testing patient specimens. Modern POCT devices feature electronic lockouts that prevent patient testing if QC is overdue or failing.
Reagent Integrity & Calibration:
Ensure test strips or micro-cuvettes are within their expiration date and stored in sealed, desiccant-lined vials at the manufacturer-specified temperature. Check that the strip lot code matches the meter's active calibration profile.
Specimen Collection & Application:
Perform skin puncture following CLSI standards (allow 70% alcohol to dry completely, wipe away the first drop of capillary blood to prevent interstitial fluid contamination, and apply the second drop smoothly to the test strip).
Infection Control & Instrument Disinfection:
Between every patient encounter, the POCT meter must be thoroughly wiped down and disinfected using an EPA-registered hospital disinfectant wipe (with required wet contact time) to prevent cross-contamination and healthcare-associated transmission of bloodborne pathogens (such as Hepatitis B virus).
What Makes Point-of-Care Testing Different
DTP task 3.13 is "perform point of care testing (e.g., urinalysis, glucose, pregnancy test)." Notice where it sits: in Domain 3, Specimen Collection — because POCT is something the technician performs , not merely something the laboratory does elsewhere. When you run a bedside glucose, you are simultaneously the collector, the analyst, and the person responsible for the quality of the result.
- Attribute Central laboratory Point of care
- Turnaround 30 minutes to hours Minutes
- Specimen Usually venous, centrifuged Usually capillary whole blood or urine
Analytical control Dedicated QC program, trained MLS staff Operator-dependent ; QC performed by the same person testing the patient
Typical volume Milliliters Microliters
Error exposure Concentrated in the pre-analytical phase Spread across all three phases, all performed by one person
Common Point-of-Care Tests
Blood glucose meters. The most frequently performed POCT. Use a capillary sample from a properly warmed, cleansed, and dried finger, and wipe away the first drop — residual interstitial fluid or alcohol will skew the reading.
Urinalysis dipsticks. Timing is the whole method: each pad is read at its manufacturer-specified interval. Reading late produces false positives as reagents continue to react.
Pregnancy testing (urine hCG). A first-morning specimen is the most concentrated and therefore most sensitive.
Hemoglobin and hematocrit. Used for donor screening and anemia assessment.
Point-of-care INR. Used for warfarin management; results are method-specific and not always interchangeable with laboratory INR.
Rapid infectious disease tests. Strep, influenza, and similar antigen tests, where a negative result frequently requires confirmatory culture.
Activated clotting time. Used during procedures requiring heparin monitoring.
Quality Control Obligations for POCT
The most common exam misconception is that "CLIA-waived" means "no rules." It does not. Waived status means the test is simple enough that the risk of an erroneous result is low when the manufacturer's instructions are followed exactly — and following them exactly is the obligation.
Run controls as the manufacturer specifies — typically at minimum with each new lot, each new shipment, when a new operator begins, if the device is dropped, and at defined intervals.
Document every QC result before patient testing. Undocumented QC is treated as QC never performed.
Do not test patients when QC is out of range. Investigate: expired or improperly stored strips, a device needing recalibration, or an environmental issue.
Check strip and reagent expiration dates and storage conditions. Test strips are humidity-sensitive; leaving a vial open degrades them.
Maintain operator competency records. Facilities must document that each operator was trained and periodically re-assessed.
Warning
Never report a POCT result that contradicts the patient's clinical picture without confirmation. A glucose meter reading of 25 mg/dL on an alert, conversational patient is far more likely to be a meter or specimen problem than genuine profound hypoglycemia. Confirm with a laboratory glucose — and never simply re-run the same specimen on the same meter and accept the second number.
Documentation and Result Reporting
POCT results are patient results and belong in the medical record with the same elements as any other: patient identifiers, date, exact time, the result, the device or lot identification, and the operator. A result written on a paper towel and reported verbally is not documented. Critical values discovered by POCT follow the same critical-value notification process as laboratory results — immediate communication to the responsible clinician with read-back confirmation.