Study guide

8.6 Processing Non-Blood Specimens & Routing to Laboratory Departments

NCCT National Certified Phlebotomy Technician NCPT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCPT Exam Overview, Eligibility & Study Strategy

1.1 Exam Facts, Format & Scoring 1.2 Eligibility Pathways, Application & Retake Policy 1.3 Blueprint Study Strategy & Credential Roadmap

2 Chapter 2: Infection Control & Safety (Domain 1 — 15%)

2.1 The Chain of Infection & Breaking Transmission 2.2 Hand Hygiene & Glove Use Standards 2.3 PPE Selection & Donning/Doffing Protocols 2.4 Sharps Safety & Safety-Device Activation 2.5 Isolation Precautions & Biohazard Spill Response 2.6 Cleaning & Disinfecting Equipment and Work Surfaces 2.7 OSHA Bloodborne Pathogens & Post-Exposure Management

3 Chapter 3: Equipment Selection (Domain 2A — 12 items)

3.1 Equipment Quality Verification & Allergy Alternatives 3.2 Venipuncture Equipment & Needle Anatomy 3.3 Winged Infusion Sets (Butterfly) & Syringe Systems 3.4 Capillary Equipment & Lancet Depth Selection 3.5 Bandaging Materials & Post-Collection Patient Care

4 Chapter 4: Patient & Site Preparation (Domain 2B — 13 items)

4.1 Patient Identification Standards 4.2 Requisition Review, Order Clarification & Documentation 4.3 Physiological Factors & Basal State Patient Prep 4.4 Patient Education & Therapeutic Communication 4.5 Venous Site Selection & Prohibited Sites 4.6 Antiseptic Selection & Tourniquet Application

5 Chapter 5: Routine Venipuncture Procedure (Domain 3 — 30%)

5.1 Prioritizing Collections: STAT, Timed & Routine 5.2 Routine Venipuncture: Preparation & Patient Assessment 5.3 Needle Insertion, Collection & Post-Puncture Care 5.4 CLSI Order of Draw & Tube Additive Mechanics 5.5 Fill Volumes, Inversions & Matching Tests to Tubes

6 Chapter 6: Special Patient Populations & Precautions

6.1 Precautions for Patients with Medical Conditions 6.2 Adapting Collection for Pediatric Patients 6.3 Geriatric, Dialysis & Other Difficult-Draw Populations

7 Chapter 7: Capillary & Special Collections

7.1 Capillary Blood Composition, Indications & Contraindications 7.2 Fingerstick Site Selection, Warming & Technique 7.3 CLSI GP42 Capillary Order of Draw & Blood Gas Collection 7.4 Neonatal Heelstick & Newborn Metabolic Screening 7.5 Blood Culture Collection Protocols & Timing 7.6 Therapeutic Drug Monitoring & Glucose Tolerance Testing 7.7 Point-of-Care Testing Procedures

8 Chapter 8: Specimen Handling, Processing & Non-Blood Specimens

8.1 Specimen Mixing & Mandatory Bedside Labeling 8.2 Assessing Specimen Suitability & Rejection Criteria 8.3 Temperature-, Light- & Time-Sensitive Specimen Handling 8.4 Specimen Processing: Centrifugation, Aliquoting & Storage 8.5 Non-Blood Specimen Collection & Patient Instruction 8.6 Processing Non-Blood Specimens & Routing to Laboratory Departments

9 Chapter 9: Collection Complications & Troubleshooting (Domain 4 — 15%)

9.1 Vasovagal Syncope: Recognition & Emergency Response 9.2 Seizures, Nausea, Petechiae & Allergic Reactions 9.3 Nerve Injury, Hematomas & Accidental Arterial Puncture 9.4 Technical Troubleshooting & the Two-Attempt Rule 9.5 Hemolysis & Hemoconcentration 9.6 IV Contamination & Analytical Interference

10 Chapter 10: Law, Ethics & Regulatory Standards (Domain 5 — 15%)

10.1 Civil Law, Torts, Negligence & Standard of Care 10.2 Patient Consent, the AHA Bill of Rights & Refusal 10.3 HIPAA Privacy Rule & Permitted Disclosures 10.4 Forensic Chain of Custody & Blood Alcohol Collection 10.5 Workplace Safety Regulation: OSHA, SDS, NFPA & Fire Response 10.6 CLIA ’88, Quality Assurance & Quality Control 10.7 Reportable Incidents, Risk Management & Error Disclosure

11 Chapter 11: Comprehensive Review & Clinical Practice Scenarios

11.1 Critical Order of Draw & Additive Reference Summary 11.2 Clinical Decision Scenarios & Troubleshooting Drills 11.3 Exam-Day Strategy & Professional Recertification

8.6 Processing Non-Blood Specimens & Routing to Laboratory Departments

Key Takeaways Explain This Topic AI

Hematology performs the CBC, differential, ESR, and coagulation studies in many facilities.

Chemistry performs electrolytes, metabolic panels, enzymes, and therapeutic drug levels.

Microbiology processes cultures and requires specimens in transport medium delivered promptly.

Blood bank (immunohematology) performs type and screen and crossmatch and enforces the strictest identification rules.

Urinalysis specimens should be tested within 2 hours or refrigerated, because delay changes cells, casts, and chemistry.

Last updated: August 2026

8.6 Processing Non-Blood Specimens & Routing to Laboratory Departments

Quick Answer: DTP tasks 3.19 (process standard non-blood specimens) and 3.22 (deliver specimens to the correct department) require you to know the laboratory's internal map. The Essential Knowledge Base lists "clinical laboratory departments" as an integrated concept for exactly this reason.

The Clinical Laboratory Departments

Department What it tests Common specimens you deliver

Hematology Formed elements of blood — cells and coagulation Lavender EDTA (CBC, differential, ESR, HbA1c), light blue citrate (PT/INR, aPTT, D-dimer)

Chemistry Analytes dissolved in serum or plasma Gold SST and green heparin (metabolic panels, enzymes, lipids), gray (glucose tolerance, alcohol), plus most urine chemistry

Microbiology Detection and identification of organisms Blood culture bottles, urine cultures, throat and wound swabs, sputum, stool cultures, ova and parasites

Blood Bank / Immunohematology Compatibility and antibody testing Pink or lavender EDTA (type and screen, crossmatch, direct antiglobulin test)

  • Urinalysis Physical, chemical, and microscopic urine examination Random and first-morning urine
  • Serology / Immunology Antigen and antibody testing Serum for infectious disease serology, autoimmune panels

Histology / Cytology Tissue and cell morphology Tissue in fixative, Pap specimens, body fluids for cell analysis

Molecular / Reference send-out PCR, genetics, esoteric assays Specialized tubes per the reference laboratory's requirements

Important

Coagulation is sometimes a separate department rather than a hematology subsection, and serology is frequently folded into chemistry. Department boundaries vary between facilities, so learn your own laboratory's map. What does not vary is the principle: the specimen goes where the test is performed, promptly and in the required condition.

Why Routing Matters

Delivering a specimen to the wrong bench is not a harmless detour:

Stability windows are consumed. A urine specimen that spends 90 minutes at the chemistry bench before reaching urinalysis may exceed the 2-hour limit for microscopic examination.

Turnaround times slip , which matters most for the STAT specimens where turnaround was the point.

Temperature-controlled specimens lose their condition. A chilled ammonia specimen routed to the wrong department warms while it waits.

Blood bank specimens have the strictest handling of all , and a misrouted crossmatch specimen delays a transfusion.

  • Processing Standard Non-Blood Specimens
  • Urine

Test or refrigerate within 2 hours. Left at room temperature, urine undergoes predictable deterioration: bacteria multiply , pH rises as urea converts to ammonia, glucose falls from bacterial and cellular consumption, ketones and bilirubin degrade , and casts and red cells lyse .

Refrigeration preserves most analytes but can precipitate amorphous urates and phosphates , which obscure the microscopic examination.

Chemical preservatives are used for timed collections; the preservative must match the test.

For culture, deliver promptly or use a boric acid transport tube , which holds the bacterial count stable.

Mix the specimen before aliquoting, because cells and casts settle.

Stool

Ova and parasite specimens go into the specified preservative vials promptly.

Culture specimens require prompt transport in a transport medium.

Occult blood cards are handled per manufacturer instructions and are not refrigerated.

Sputum and Respiratory

Transport promptly; refrigerate if delayed.

Microbiology assesses specimen adequacy microscopically — a specimen that is mostly squamous epithelial cells is saliva and is rejected, which is why patient instruction matters so much.

Swabs and Cultures

Place into transport medium immediately ; a dried swab is a dead specimen.

Deliver to microbiology promptly. Most bacterial transport media hold organisms viable at room temperature for a limited window.

Anaerobic cultures require specific anaerobic transport systems and must not be exposed to air.

Body Fluids

Cerebrospinal fluid, synovial fluid, pleural, peritoneal, and pericardial fluids are typically collected in numbered sterile tubes distributed across departments — commonly tube 1 to chemistry or serology, tube 2 to microbiology, tube 3 to hematology for cell count. CSF is an irreplaceable specimen and is delivered immediately, never refrigerated when culture is ordered, and never delayed.

Transport Practices

Secondary containment. Sealed biohazard bag with the requisition in the outer pocket , so a leak does not destroy the paperwork.

Stopper up. Transport tubes vertically to promote complete clotting and prevent stopper contact, which causes hemolysis and aerosol on opening.

Maintain the required condition end to end. Chilled specimens stay in the slurry; warmed specimens stay at 37 °C; light-protected specimens stay covered.

Do not use pneumatic tube systems for specimens prone to hemolysis or where policy prohibits it — blood bank specimens, some coagulation studies, and manually collected syringe specimens are common exclusions.

Hand off, do not abandon. A specimen left on a counter with no one notified is a specimen at risk. Delivery means transferred into the receiving department's process.

Warning

A leaking specimen is both a biohazard and a compromised specimen. Do not attempt to salvage a leaking container by transferring the contents. Report it, decontaminate, and arrange recollection.