Study guide
11.4 Consultant Coordination: Signage & Wayfinding
NCIDQ Interior Design Qualification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the NCIDQ Exam 1.2 Eligibility & Application Routes 1.3 Test-Taking Strategies & Item Types 1.4 The 2026 NCIDQ Blueprint Overview
2 Study Planning, Codes & Logistics
2.1 Building a Study Plan 2.2 Codes & Reference Standards Overview 2.3 Fees, Schedule & Logistics
3 IDFX: Existing Conditions
3.1 Existing Conditions: Initial Code Analysis 3.2 Existing Conditions: Evaluating the Building
4 IDFX: Pre-Design
4.1 Pre-Design: Site Analysis 4.2 Pre-Design: Best Practices of Design 4.3 Pre-Design: Project Research & Development 4.4 Pre-Design: Determining Design Intent
5 IDFX: Programming
5.1 Programming: Validating the Project Program 5.2 Programming: Programmatic Diagrams 5.3 Programming: Determining User Needs
6 IDFX: Space Planning & Preliminary FF&E
6.1 Space Planning: Completing Space Plans 6.2 Space Planning: Creating Initial Drawings 6.3 Preliminary FF&E: Identifying Finish Materials 6.4 Preliminary FF&E: Identifying Significant FF&E
7 IDFX: Schematics
7.1 Schematics: Refining Design Intent 7.2 Schematics: Performing Code Review 7.3 Schematics: Visualizing Design
8 IDIX: Codes & Life Safety
8.1 Codes & Life Safety: Performing Code Review 8.2 Codes & Life Safety: Life Safety & Occupancy Plan
9 IDIX: Integration & FF&E
9.1 Integration: Integrating Equipment & Building Systems 9.2 Integration: Developing Finish Plan & Specifications 9.3 Integration: Developing Furniture Plans & Specifications
10 IDIX: Construction Documents
10.1 Construction Documents: Details & Sections 10.2 Construction Documents: Elevations 10.3 Construction Documents: Demolition Plans 10.4 Construction Documents: Construction Plans
11 IDIX: RCP & Consultant Coordination
11.1 Construction Documents: Reflected Ceiling Plans 11.2 Consultant Coordination: Coordinating Consultant Drawings & Specs 11.3 Consultant Coordination: Power, Data & Communication Plans 11.4 Consultant Coordination: Signage & Wayfinding
12 IDIX: Construction Specifications & Schedules
12.1 Construction Specifications & Schedules: Developing Construction Specifications 12.2 Construction Specifications & Schedules: Developing Schedules
13 IDPX: Feasibility Studies
13.1 Feasibility Studies: Identifying Project Stakeholders 13.2 Feasibility Studies: Managing the Project Team 13.3 Feasibility Studies: Evaluating Project Feasibility & Due Diligence
14 IDPX: Scheduling, Budgeting & Contracts
14.1 Scheduling & Budgeting: Managing the Project Schedule 14.2 Scheduling & Budgeting: Managing the Project Budget 14.3 Contracts & Procurement: Facilitating the Procurement/Bid Process 14.4 Contracts & Procurement: Managing Proposals & Contracts
15 IDPX: Approvals, Permitting & Construction Process
15.1 Approvals & Permitting: Obtaining Project Approvals 15.2 Approvals & Permitting: Participating in the Permit Process 15.3 Construction Process: Facilitating the Construction Process 15.4 Construction Process: Participating in Change Management
16 IDPX: Site Observation & Project Close-Out
16.1 Project Closeout & Evaluation: Performing Site Visits 16.2 Project Closeout & Evaluation: Conducting Project Close-Out
17 Final Review: Synthesizing the NCIDQ & Exam-Day Readiness
17.1 Synthesizing the Three Sections 17.2 Common Pitfalls & High-Yield Topics 17.3 Exam-Day Readiness & Final-Week Plan
11.4 Consultant Coordination: Signage & Wayfinding
Key Takeaways Explain This Topic AI
ICC A117.1 Section 703 requires tactile characters 5/8 to 2 inches high, mounted 48 to 60 inches AFF, with Grade 2 Braille below the text
Five signage types are identification, directional, informational, regulatory, and ADA/accessibility
Tactile signs go on the latch side of doors with an 18 by 18 inch clear floor space beyond the door swing arc
Occupant-load signage is required in assembly spaces with 50 or more occupants per IBC 1004
A wayfinding system uses four principles: orientation, route decision, route monitoring, and destination recognition
Last updated: August 2026
What Is Signage and Wayfinding?
Wayfinding is the process of navigating through a building or environment. Signage is the physical medium that supports wayfinding. The NCIDQ IDIX exam tests your ability to develop a signage program that is functional, code-compliant, and aligned with the design intent. This is a key part of Domain IV (Consultant Coordination, 18%).
Signage Types
A complete signage program uses five functional categories:
- Type Purpose Examples
- Identification Names a space or landmark Room numbers, department names, building ID
- Directional Guides movement Arrow signs, corridor markers, floor directories
- Informational Provides context Building maps, hours of operation, directory boards
- Regulatory States rules or requirements "No Smoking," "Authorized Personnel Only"
- ADA / Accessibility Code-required accessible signage Tactile room signs, exit signs, pictograms
- Code-Required Signage
Several codes mandate specific signage. The interior designer must know which signs are required and where.
Tactile Signage (ICC A117.1 Section 703)
Permanently mounted room signs must be tactile (raised characters and Braille) when the room is identified by a number or letter, or when the sign identifies a function. Key requirements per A117.1 Section 703:
- Raised character height : 5/8 inch (16 mm) minimum to 2 inches (51 mm) maximum
- Raised character depth : 1/32 inch (0.8 mm) minimum above background
- Case : Uppercase only for tactile characters
- Font : Sans serif, no italic or decorative
- Braille : Contracted (Grade 2), positioned below the text
Mounting height : 48 inches (1220 mm) minimum to 60 inches (1525 mm) maximum above finish floor, measured to the baseline of the lowest and highest tactile characters
Location at doors : On the latch side; double doors with one active leaf — on the inactive leaf; two active leaves — right of the right-hand door
- Clear floor space : 18 in x 18 in (455 mm x 455 mm) minimum, centered on the sign, beyond the door swing arc
- Contrast : Light-on-dark or dark-on-light; non-glare finish
- Pictogram field : 6 inches (150 mm) minimum height; text and Braille below the field
- Exit and Egress Signage
Per the IBC and NFPA 101:
Exit signs — Illuminated, green or red (jurisdiction-dependent), with letters at least 6 inches high and 3/4 inch stroke
Egress path marking — Photoluminescent or electrically illuminated strips along exit paths in high-rise buildings (per IBC 403 and 1025)
- Directional exit signs — At every intersection where the path to an exit is unclear
- Occupant Load Signage
Per IBC 1004 and NFPA 101:
- Maximum occupant load signs are required in assembly spaces where the occupant load is 50 or more
- Sign must be permanently mounted, legible, and state "Maximum Capacity: [number] Persons"
- Typically placed near the main entrance to the space
- Wayfinding Strategy
A wayfinding strategy is more than a sign schedule. It is a system that uses architecture, landmarks, color, and signage to help people know where they are, where they are going, and how to get there. The four principles of wayfinding:
- Orientation — The user knows where they are (landmarks, directories, "You Are Here" maps)
- Route decision — The user can identify the path (directional signs, arrows, color coding)
- Route monitoring — The user can confirm they are on the right path (repeated confirmation signs, landmarks)
- Destination recognition — The user knows they have arrived (identification signs, room numbers)
- ADA Pictograms
ADA signage uses standardized pictograms to communicate function without text. Common pictograms:
- Restroom (male, female, unisex, accessible)
- Accessible entrance (wheelchair symbol)
- Assisted listening (ear with sound waves)
- TTY (telephone with text)
- No smoking (cigarette with slash)
Pictograms must have a field at least 6 inches high, with no text or Braille inside the field. Descriptive text and Braille go directly below the pictogram field.
Signage Schedule
The interior designer produces a signage schedule that lists every sign in the project:
- Mark Type Location Size Material Mounting Notes
- S-01 Tactile Room 101 6x9 Acrylic Latch side, 48–60 in AFF Restroom
- S-02 Directional Corridor junction 12x12 Aluminum 84 in AFF Arrow to exit
- S-03 Exit Above door 12x6 LED edge-lit 80 in AFF Red
- Coordination with Consultants
Signage coordination involves:
- Architect — Confirm room numbers, door types, wall construction
- Electrical engineer — Power for illuminated signs and exit signs
- AV consultant — Digital signage and interactive directories
- Code consultant — Confirm required signs and occupant-load calculations
- Local AHJ — Verify local amendments to IBC, NFPA 101, and A117.1
- Exam Scenario
On the IDIX exam, expect questions that test your knowledge of A117.1 Section 703 tactile signage requirements — character height, mounting height, location at doors, and Braille placement. You may also be asked to identify which signage type a given sign belongs to, or to determine whether a space requires occupant-load signage. The key is knowing the difference between the five functional types and the specific code thresholds that trigger required signage.