Study guide

9.2 Speed, Distance, Time, & Accident Skid-Mark Calculations

National Criminal Justice Officer Selection Inventory NCJOSI²

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCJOSI Overview, Test Mechanics & Pacing Strategies

1.1 Exam Architecture: Cognitive vs. Non-Cognitive Structure, Administration & Scoring 1.2 Test Pacing Tactics (150 Minutes for 200 Items), Time Management & Guessing Strategies 1.3 Hiring Agency Standards: Cut Scores, Civil Service Banding, Background Checks & Polygraph Integration

2 Chapter 2: Verbal Comprehension & Police Document Analysis

2.1 Reading Police Department Policies, Standard Operating Procedures (SOPs), & Directives 2.2 Factual Extraction from Incident Reports, Affidavits, & Witness Statements 2.3 Critical Inference, Identifying Implicit Details, & Avoiding Assumptions in Investigations

3 Chapter 3: Verbal Expression, Grammar & Police Report Mechanics

3.1 Police Vocabulary, Common Confusables, & High-Frequency Spelling in Law Enforcement 3.2 Sentence Structure, Syntax, Modifiers, & Active Voice in Official Documentation 3.3 Punctuation, Capitalization, Pronoun Case, & Mechanical Accuracy in Field Notes

4 Chapter 4: Deductive Reasoning & Policy Application

4.1 Applying Legal Rules, Statutory Thresholds, & Probable Cause Standards 4.2 Conditional Logic (If/Then, Modus Ponens, Modus Tollens) in Officer Decision-Making 4.3 Syllogisms, Categorical Logic, & Valid Deductions Under Pressure

5 Chapter 5: Inductive Reasoning, Pattern Recognition & Graph Interpretation

5.1 Trend Identification & Connecting Elements Across Disparate Incident Scenarios 5.2 Modus Operandi (MO) Analysis & Criminal Pattern Synthesis 5.3 Reading Tables, Bar Graphs & Pie Charts for Trend Conclusions

6 Chapter 6: Problem Sensitivity & Situational Hazard Recognition

6.1 Identifying Imminent Operational Hazards, Scene Inconsistencies, & Red Flags 6.2 Officer Safety Traps, Ambush Awareness, & Tactical Discrepancy Detection 6.3 Prioritizing Calls for Service & Emergency Dispatch Triage

7 Chapter 7: Spatial Orientation, Map Reading & Route Planning

7.1 Compass Bearings, Cardinal Directions, & Grid Reference Navigation 7.2 Route Optimization, One-Way Street Systems, & Dead-End Avoidance Under Emergency Driving 7.3 Spatial Relation Puzzles, Floor Plans, & Tactical Interior Building Clearing Navigation

8 Chapter 8: Information Gathering, Selective Attention, Flexibility of Closure & Visualization

8.1 Information Gathering: Sequencing Statements & Linking Witness Accounts 8.2 Selective Attention: Matching Letter, Number & Symbol Strings Exactly 8.3 Flexibility of Closure: Finding a Known Shape Hidden in a Figure 8.4 Visualization: Recognizing a Person or Object After It Changes

9 Chapter 9: Applied Mathematics (Original NCJOSI Mathematical Reasoning)

9.1 Hand Arithmetic, Decimals, Fractions, & Percentages (No-Calculator Mechanics) 9.2 Speed, Distance, Time, & Accident Skid-Mark Calculations 9.3 Geometry in Field Operations: Perimeter, Area, & Crime Scene Tape Cordoning 9.4 Law Enforcement Resource Allocation, Shift Scheduling, & Payroll Overtime Math

10 Chapter 10: Section II Non-Cognitive (Integrity) Measure

10.1 Section II Explained: 120 Agreement-Scale Statements, Scoring & Honest Responding 10.2 Anti-Social Behaviors & Rule Compliance: Gratuities, Dishonesty, & Off-Duty Conduct 10.3 Orderliness & Diligence: Conscientiousness, Follow-Through & Accurate Records 10.4 Socialization, Community Policing, De-escalation & Duty to Intervene 10.5 Positive Outlook: Optimism, Resilience & Recovering from Stress

9.2 Speed, Distance, Time, & Accident Skid-Mark Calculations

Key Takeaways Explain This Topic AI

Distance equals speed times time; convert minutes to hours (divide by 60) before using a speed in miles per hour.

One mile per hour equals 22/15 (about 1.467) feet per second, because a mile is 5,280 feet and an hour is 3,600 seconds.

During the perception-reaction time a vehicle travels at full speed; textbook problems often assume 1.5 seconds.

Rate problems are multiplication and division, which fall within the original NCJOSI's Mathematical Reasoning area.

The skid-to-stop formula S = √(30 × d × f) gives a minimum speed and is optional enrichment beyond IOS's listed math topics.

Last updated: October 2026

9.2 Speed, Distance, Time, & Accident Skid-Mark Calculations

Note

ExamFinch provides this independent study guide to help prospective law enforcement officers prepare for the National Criminal Justice Officer Selection Inventory (NCJOSI). ExamFinch is an independent educational publisher and is not associated with, affiliated with, or endorsed by Industrial/Organizational Solutions (IOS) or any municipal civil service commission.

Patrol officers make time-critical decisions governed by vehicle kinematics every day. Whether evaluating emergency response arrival times (ETA), maintaining safe vehicle spacing during high-speed pursuits, or investigating serious motor vehicle collisions, law enforcement officers must understand the mathematical relationships between speed, distance, time, and friction.

Civil service examinations assess these principles through practical word problems. Candidates must be able to convert units between miles per hour and feet per second, calculate perception-reaction distances, and utilize basic traffic accident reconstruction formulas without a calculator.

The Kinematic Triad: Speed, Distance, and Time

All basic motion calculations in police operations derive from the fundamental rate equation:

D = S × T D = S \times T D = S × T

Where:

  • D D D = Distance traveled (miles or feet)
  • S S S = Speed or velocity (miles per hour [mph] or feet per second [fps])
  • T T T = Elapsed time (hours or seconds)

From this single equation, two reciprocal relationships emerge:

S = D T and T = D S S = \frac{D}{T} \quad \text{and} \quad T = \frac{D}{S} S = T D ​ and T = S D ​ The Kinematic Triangle

  • [ D ]
  • / \
  • / * \
  • [ S ] --- [ T ]

To solve for any variable, cover it:

  • D = S * T • S = D / T • T = D / S
  • Units Consistency Rule

A frequent error in rate problems is mixing units of time. If speed is expressed in miles per hour (mph) , time MUST be converted into hours before multiplying or dividing:

To convert minutes to hours, divide by 60: 15 minutes = 15 60 = 0.25 hours 15\text{ minutes} = \frac{15}{60} = 0.25\text{ hours} 15 minutes = 60 15 ​ = 0.25 hours ; 20 minutes = 20 60 = 1 3 hours 20\text{ minutes} = \frac{20}{60} = \frac{1}{3}\text{ hours} 20 minutes = 60 20 ​ = 3 1 ​ hours ; 45 minutes = 45 60 = 0.75 hours 45\text{ minutes} = \frac{45}{60} = 0.75\text{ hours} 45 minutes = 60 45 ​ = 0.75 hours .

To convert hours to minutes, multiply by 60: 0.4 hours × 60 = 24 minutes 0.4\text{ hours} \times 60 = 24\text{ minutes} 0.4 hours × 60 = 24 minutes .

Worked Word Problem: Backup Unit Estimated Arrival Time (ETA)

Scenario : Dispatch broadcasts an "officer needs assistance" priority call at an intersection 9 miles away from Unit 214's current patrol location. Unit 214 responds immediately with emergency lights and sirens, navigating suburban arterial corridors at an average response speed of 45 mph. How many minutes will it take Unit 214 to arrive on scene?

Step-by-Step Solution :

Identify the target variable : Time ( T = D S T = \frac{D}{S} T = S D ​ ).

Insert given values : T = 9 miles 45 mph = 1 5 hour = 0.20 hours T = \frac{9\text{ miles}}{45\text{ mph}} = \frac{1}{5}\text{ hour} = 0.20\text{ hours} T = 45 mph 9 miles ​ = 5 1 ​ hour = 0.20 hours

Convert hours to minutes : 0.20 hours × 60 minutes/hour = 12 minutes 0.20\text{ hours} \times 60\text{ minutes/hour} = 12\text{ minutes} 0.20 hours × 60 minutes/hour = 12 minutes

Velocity Conversion: Miles Per Hour (mph) to Feet Per Second (fps)

In accident reconstruction and tactical driving, vehicle movement is measured in fractions of a second. Standard roadway speeds expressed in miles per hour do not easily translate into split-second perception distances. Officers must convert mph into feet per second (fps).

The Mathematical Derivation of 1.467

A mile contains 5,280 feet, and an hour contains 3,600 seconds (60 minutes × \times × 60 seconds):

1 mile 1 hour = 5 , 280 feet 3 , 600 seconds = 22 15 ≈ 1.4667 fps \frac{1\text{ mile}}{1\text{ hour}} = \frac{5,280\text{ feet}}{3,600\text{ seconds}} = \frac{22}{15} \approx 1.4667\text{ fps} 1 hour 1 mile ​ = 3 , 600 seconds 5 , 280 feet ​ = 15 22 ​ ≈ 1.4667 fps

To convert any speed in mph to fps:

Speed (fps) = Speed (mph) × 1.467 \text{Speed (fps)} = \text{Speed (mph)} \times 1.467 Speed (fps) = Speed (mph) × 1.467

To convert fps back to mph:

Speed (mph) = Speed (fps) 1.467 ≈ Speed (fps) × 0.682 \text{Speed (mph)} = \frac{\text{Speed (fps)}}{1.467} \approx \text{Speed (fps)} \times 0.682 Speed (mph) = 1.467 Speed (fps) ​ ≈ Speed (fps) × 0.682

Tip

The Fast No-Calculator Conversion Shortcut : To convert mph to fps mentally without multi-digit decimal multiplication, take the speed in mph, add half of that speed, and subtract about 2% of the result: fps ≈ mph + 1 2 ( mph ) − 2 % \text{fps} \approx \text{mph} + \frac{1}{2}(\text{mph}) - 2\% fps ≈ mph + 2 1 ​ ( mph ) − 2% For example, at 60 mph: 60 + 30 = 90 60 + 30 = 90 60 + 30 = 90 . Subtract 2% ( 1.8 1.8 1.8 ) ≈ 88.2 fps \approx 88.2\text{ fps} ≈ 88.2 fps (exact value: 60 × 1.4667 = 88.0 fps 60 \times 1.4667 = 88.0\text{ fps} 60 × 1.4667 = 88.0 fps ). At 40 mph: 40 + 20 = 60 − 1.2 = 58.8 fps 40 + 20 = 60 - 1.2 = 58.8\text{ fps} 40 + 20 = 60 − 1.2 = 58.8 fps (exact: 40 × 1.4667 = 58.7 fps 40 \times 1.4667 = 58.7\text{ fps} 40 × 1.4667 = 58.7 fps ).

  • Speed (mph) Conversion Factor (22/15) Exact Velocity (fps) Rounded Test Value (fps)
  • 15 mph 15 × 1.4667 15 \times 1.4667 15 × 1.4667 22.0 fps 22 fps
  • 30 mph 30 × 1.4667 30 \times 1.4667 30 × 1.4667 44.0 fps 44 fps
  • 45 mph 45 × 1.4667 45 \times 1.4667 45 × 1.4667 66.0 fps 66 fps
  • 50 mph 50 × 1.4667 50 \times 1.4667 50 × 1.4667 73.3 fps 73 fps
  • 60 mph 60 × 1.4667 60 \times 1.4667 60 × 1.4667 88.0 fps 88 fps
  • 75 mph 75 × 1.4667 75 \times 1.4667 75 × 1.4667 110.0 fps 110 fps
  • Perception-Reaction Time and Stopping Distance

A moving vehicle cannot stop instantaneously. Total stopping distance consists of two distinct physical phases:

D total = D pr + D braking D_{\text{total}} = D_{\text{pr}} + D_{\text{braking}} D total ​ = D pr ​ + D braking ​ Total Stopping Distance Anatomy

  • ┌───────────────────────────────────┬───────────────────────────────────┐
  • │ Perception-Reaction Distance │ Braking Skid Distance │
  • │ (Vehicle at Full Speed) │ (Tires Locked / Decel) │
  • │ D_pr = Speed(fps) * t_pr │ D_braking = S^2 / 30f │
  • └───────────────────────────────────┴───────────────────────────────────┘
  • ▲ ▲ ▲
  • Hazard Observed Brakes Engaged Full Rest
  • 1. Perception-Reaction Distance ( D pr D_{\text{pr}} D pr ​ )

The distance the vehicle travels while the driver perceives a hazard, decides on an evasive action, and physically moves their foot from the accelerator pedal to depress the brake pedal. During this entire interval, the vehicle continues moving forward at full initial speed:

D pr = Speed (fps) × t pr = ( S mph × 1.467 ) × t pr D_{\text{pr}} = \text{Speed (fps)} \times t_{\text{pr}} = (S_{\text{mph}} \times 1.467) \times t_{\text{pr}} D pr ​ = Speed (fps) × t pr ​ = ( S mph ​ × 1.467 ) × t pr ​

Textbook and test problems commonly assume a perception-reaction time of 1.5 seconds 1.5\text{ seconds} 1.5 seconds . Real values vary with the driver and the situation (highway design standards use a longer 2.5 seconds), so always use the time the problem gives you.

Worked Word Problem: Perception-Reaction Distance

Scenario : A motorist is driving at 40 mph down a residential street when a child suddenly runs out into the street 100 feet ahead. The motorist has an average perception-reaction time of 1.5 seconds before their foot depresses the brake pedal. How many feet will the vehicle travel during the perception-reaction period alone before braking even begins?

Step-by-Step Solution :

Convert speed to feet per second : Speed in fps = 40 × 1.467 = 58.68 fps (or 40 × 22 15 = 880 15 = 58.67 fps) \text{Speed in fps} = 40 \times 1.467 = 58.68\text{ fps (or } 40 \times \frac{22}{15} = \frac{880}{15} = 58.67\text{ fps)} Speed in fps = 40 × 1.467 = 58.68 fps (or 40 × 15 22 ​ = 15 880 ​ = 58.67 fps)

Multiply velocity by perception-reaction time : D pr = 58.67 fps × 1.5 seconds = 88.0 feet D_{\text{pr}} = 58.67\text{ fps} \times 1.5\text{ seconds} = 88.0\text{ feet} D pr ​ = 58.67 fps × 1.5 seconds = 88.0 feet

Operational Assessment : The vehicle travels 88 feet of the available 100 feet before the brakes even engage, leaving only 12 feet of physical braking distance to prevent impact.

Optional Enrichment: The Skid-Mark Speed Formula

Note

IOS does not list square roots or crash reconstruction among the original NCJOSI's math topics, and the NCJOSI² has no math dimension. Study this part only after the core rate problems above.

When a driver locks the wheels during emergency braking, the tires slide across the road surface, leaving dark friction marks (skid marks) composed of melted tire rubber and bituminous asphalt oils. In traffic crash investigations, officers calculate the minimum initial speed of the vehicle prior to braking by analyzing skid length and surface friction.

The Standard Empirical Skid Formula

Derived from the physical work-energy theorem ( E k = W f ⟹ 1 2 m v 2 = μ m g d E_k = W_f \implies \frac{1}{2}mv^2 = \mu mgd E k ​ = W f ​ ⟹ 2 1 ​ m v 2 = μ m g d ), the empirical traffic reconstruction formula for initial speed in miles per hour is:

S = 30 × d × f S = \sqrt{30 \times d \times f} S = 30 × d × f ​

Where:

S S S = Minimum initial speed in miles per hour (mph)

30 30 30 = Empirical gravitational constant and unit conversion factor ( 30 ≈ 2 g 1.467 2 = 2 × 32.174 2.151 = 29.91 30 \approx \frac{2g}{1.467^2} = \frac{2 \times 32.174}{2.151} = 29.91 30 ≈ 1.46 7 2 2 g ​ = 2.151 2 × 32.174 ​ = 29.91 )

  • d d d = Average skid mark distance in feet
  • f f f = Drag factor (coefficient of friction) of the roadway surface

Important

The speed calculated from S = 30 × d × f S = \sqrt{30 \times d \times f} S = 30 × d × f ​ is legally and scientifically defined as the minimum initial speed . It assumes the vehicle came to a dead stop solely through friction with the pavement. If the vehicle collided with another car, a pedestrian, or a telephone pole at the end of the skid, it possessed remaining residual velocity, meaning its actual initial speed was higher than the calculated value.

Calculating Average Skid Distance ( d d d )

When a vehicle leaves four locked-wheel skid marks, minor differences occur between individual tires. The distance d d d entered into the formula must be the arithmetic average of the four tire marks:

d = d front left + d front right + d rear left + d rear right 4 d = \frac{d_{\text{front left}} + d_{\text{front right}} + d_{\text{rear left}} + d_{\text{rear right}}}{4} d = 4 d front left ​ + d front right ​ + d rear left ​ + d rear right ​ ​

Typical Roadway Drag Factors ( f f f )

The drag factor ( f f f ) represents the net friction resisting tire movement. Common values used in police accident reports include:

  • Roadway Surface Material Surface Condition Typical Drag Factor ( f f f ) Range Standard Exam Value
  • Asphalt (New / Coarse) Dry 0.75 – 0.85 0.80
  • Asphalt (Worn / Polished) Dry 0.60 – 0.70 0.65
  • Asphalt (Wet) Wet 0.45 – 0.60 0.50
  • Concrete (Dry) Dry 0.70 – 0.85 0.75
  • Concrete (Wet) Wet 0.50 – 0.65 0.60
  • Gravel (Loose) Dry 0.40 – 0.55 0.45
  • Packed Snow Slick 0.15 – 0.25 0.20
  • Ice / Glare Ice Slick 0.05 – 0.15 0.10
  • Worked Word Problem: Minimum Skid-Mark Speed Calculation

Scenario : Officers investigate a broadside collision at an intersection with a posted speed limit of 35 mph. The striking vehicle left four straight, locked-wheel skid marks on dry asphalt before stopping. The investigating officer measures the four skid marks:

  • Front Left: 122 feet 122\text{ feet} 122 feet
  • Front Right: 118 feet 118\text{ feet} 118 feet
  • Rear Left: 121 feet 121\text{ feet} 121 feet
  • Rear Right: 119 feet 119\text{ feet} 119 feet

A drag sled test establishes that the dry asphalt surface has a drag factor of f = 0.80 f = 0.80 f = 0.80 . Did the vehicle exceed the 35 mph speed limit prior to braking?

Step-by-Step Solution :

Calculate average skid distance ( d d d ) : d = 122 + 118 + 121 + 119 4 = 480 4 = 120 feet d = \frac{122 + 118 + 121 + 119}{4} = \frac{480}{4} = 120\text{ feet} d = 4 122 + 118 + 121 + 119 ​ = 4 480 ​ = 120 feet

Apply the skid-to-stop formula : S = 30 × d × f S = \sqrt{30 \times d \times f} S = 30 × d × f ​ S = 30 × 120 × 0.80 S = \sqrt{30 \times 120 \times 0.80} S = 30 × 120 × 0.80 ​

Perform manual multiplication inside the radical : 30 × 120 = 3 , 600 30 \times 120 = 3,600 30 × 120 = 3 , 600 3 , 600 × 0.80 = 2 , 880 3,600 \times 0.80 = 2,880 3 , 600 × 0.80 = 2 , 880 S = 2 , 880 S = \sqrt{2,880} S = 2 , 880 ​

Evaluate the square root using bounding squares :

50 2 = 2 , 500 50^2 = 2,500 5 0 2 = 2 , 500

53 2 = ( 50 + 3 ) 2 = 2 , 500 + 300 + 9 = 2 , 809 53^2 = (50 + 3)^2 = 2,500 + 300 + 9 = 2,809 5 3 2 = ( 50 + 3 ) 2 = 2 , 500 + 300 + 9 = 2 , 809

54 2 = ( 50 + 4 ) 2 = 2 , 500 + 400 + 16 = 2 , 916 54^2 = (50 + 4)^2 = 2,500 + 400 + 16 = 2,916 5 4 2 = ( 50 + 4 ) 2 = 2 , 500 + 400 + 16 = 2 , 916

Therefore, S ≈ 53.7 mph S \approx 53.7\text{ mph} S ≈ 53.7 mph .

Conclusion : The vehicle was traveling at a minimum initial speed of approximately 53.7 mph, significantly exceeding the posted 35 mph limit.

Loading diagram... Traffic Collision Reconstruction Kinematic Decision Flow