Study guide
2.2 Post-Keratoplasty (PKP/DALK) & Corneal Cross-Linking (CXL)
ABO-NCLE Advanced Contact Lens Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Corneal Topography, Tomography & Anterior Segment Imaging
1.1 Placido-Based Corneal Topography: Axial, Tangential & Elevation Maps 1.2 Corneal Tomography & Scheimpflug Imaging: Anterior/Posterior Elevation & Pachymetry 1.3 Topographic Indices, Asphericity & Cone Localization
2 Chapter 2: Complex Corneal Conditions & Surgical Alterations
2.1 Keratoconus, Pellucid Marginal Degeneration & Keratoglobus 2.2 Post-Keratoplasty (PKP/DALK) & Corneal Cross-Linking (CXL) 2.3 Post-Refractive Ectasia & Post-Refractive Surgery Corneas
3 Chapter 3: Prefit Ocular Surface Evaluation & Candidacy Assessment
3.1 Slit-Lamp Biomicroscopy & Ocular Surface Vital Staining 3.2 Tear Film Dynamics, Dry Eye & Severe Ocular Surface Disease 3.3 Patient History, Visual Needs Analysis & Specialty Lens Selection Strategy
4 Chapter 4: Scleral Lens Design Fundamentals & Sagittal Depth
4.1 Scleral Anatomy, Terminology & Sagittal Depth Principles 4.2 Central Corneal & Limbal Vault Clearance Optimization 4.3 Landing Zone Toricity, Quadrant-Specific Haptics & Edge Profiles
5 Chapter 5: Corneal RGP & Specialty Toric Designs for Irregular Corneas
5.1 Corneal RGP Fitting Philosophies: Apical Clearance vs Bearing vs Three-Point Touch 5.2 Bitoric & High-Toric RGP Calculations: SPE vs CPE & Induced Cylinder 5.3 Lens Materials, Hyper-Dk Polymers & Surface Coatings
6 Chapter 6: Hybrid & Piggyback Contact Lens Systems
6.1 Hybrid Lens Architecture: Rigid Center & Soft Hydrophilic Skirt Fitting 6.2 Hybrid Parameter Selection, Movement & Tear Exchange Optimization 6.3 Piggyback Systems: Carrier Selection, Power Calculations & Hypoxia Prevention
7 Chapter 7: Orthokeratology & Custom Prosthetic Lenses
7.1 Orthokeratology Reverse-Geometry Principles, Jessen Formula & Topographic Patterns 7.2 Prosthetic, Occlusive & Custom Soft Specialty Lenses for Irregular Corneas
8 Chapter 8: Specialty Lens Delivery, Application & Removal Techniques
8.1 Scleral Lens Application Protocols, Plungers & Bubble Prevention 8.2 Scleral, Hybrid & RGP Removal Techniques & Emergency Extraction 8.3 Patient Handling Training, Hygiene & Lens Inspection at Dispense
9 Chapter 9: Filling Solutions, Chemical Disinfection & Wearing Schedules
9.1 Preservative-Free Scleral Reservoir Filling Solutions & Fluid Dynamics 9.2 Disinfection Regimens, Conditioning Systems, Hydra-PEG Care & Adaptation Schedules
10 Chapter 10: Slit-Lamp Fit Evaluation & Optical Troubleshooting
10.1 Settling Time Dynamics & Slit-Lamp Evaluation of Vault Clearance 10.2 Midday Fogging, Tear Reservoir Debris & Lens Surface Wettability 10.3 Over-Refraction, Lenticular Astigmatism & Lens Flexure vs Warpage
11 Chapter 11: In-Office & Laboratory Specialty Lens Modifications
11.1 In-Office Corneal RGP Modifications: Edge Blending, Polishing & Power Changes 11.2 Scleral Parameter Adjustments: Sagittal Depth, Landing Zones & Micro-Vaults 11.3 Ortho-K & Hybrid Fit Problem Solving and Parameter Modifications
12 Chapter 12: Acute Complications, Corneal Pathology & Emergency Triage
12.1 Corneal Hypoxia, Neovascularization & Graft Rejection Recognition 12.2 Mechanical Staining Patterns, Dimple Veiling, Impingement & Conjunctival Prolapse 12.3 Infectious Keratitis, Infiltrative Events & Acute Triage Protocols
13 Chapter 13: Clinical Infection Control, Regulatory Standards & Practice Management
13.1 Diagnostic Fitting Set Decontamination, OSHA & Clinical Infection Control 13.2 FCLCA, Contact Lens Rule, FDA Regulatory Standards & SOAP Documentation
2.2 Post-Keratoplasty (PKP/DALK) & Corneal Cross-Linking (CXL)
Key Takeaways Explain This Topic AI
Penetrating keratoplasty replaces full corneal thickness and leaves a graft–host junction that warrants long-term protection from trauma and close monitoring.
Begin specialty-lens fitting only after the transplant or cross-linking surgeon documents adequate healing and refractive/topographic stability; calendar intervals vary with procedure, sutures, and complications.
The conventional epi-off Dresden protocol uses riboflavin and 365-nm UVA at 3 mW/cm² for 30 minutes (5.4 J/cm²), but accelerated, transepithelial, and thin-cornea protocols are not interchangeable.
The conventional Dresden safety model uses a 400-µm de-epithelialized stromal threshold. Corneal surgeons may use validated modified protocols for thinner corneas; a technician must not prescribe the swelling or irradiation protocol.
A scleral lens can vault a graft–host junction, but modality, clearance, wear time, and oxygen burden must be individualized to graft shape and endothelial reserve.
Last updated: September 2026
2.2 Post-Keratoplasty and Post-Cross-Linking Lens Care
Corneal transplantation and corneal cross-linking change shape, healing status, and physiological reserve. The contact-lens technician's role is to obtain the surgical history, recognize red flags, document lens behavior, and work within the plan of the corneal surgeon or prescribing clinician. The procedure name alone does not select a lens or a calendar date for fitting.
Penetrating Keratoplasty and DALK
Penetrating keratoplasty replaces full corneal thickness, including endothelium. Deep anterior lamellar keratoplasty retains the host endothelium while replacing anterior tissue. Both can leave high or irregular astigmatism, a stepped graft-host junction, suture-related distortion, and focal elevation.
Document:
- procedure type and date;
- surgeon and most recent clearance;
- suture presence, location, removal history, and any loose-suture episode;
- graft clarity, epithelial integrity, vascularization, and rejection history;
- refraction and topographic stability;
- endothelial information and pachymetry when available; and
current medication and follow-up plan.
A loose or broken suture, new epithelial defect, infiltrate, unexplained edema, anterior-chamber reaction, or possible rejection is a medical issue. Stop lens wear when indicated and arrange prompt specialist evaluation rather than attempting to fit around an active complication.
When to Begin Fitting
Healing and stability vary with procedure, sutures, wound status, disease, and surgeon preference. Statements such as three months after suture removal or twelve months after surgery are examples, not universal clearance rules. Begin only after the surgeon documents sufficient healing and the refraction or corneal shape is stable enough for the intended rehabilitation.
If sutures remain, fitting is a surgeon-coordinated exception rather than a routine technician decision. Avoid pressure on an elevated graft-host junction or suture and document every relevant meridian.
Lens Modality after Keratoplasty
A corneal GP may provide excellent optics and tear exchange when it centers and avoids harmful bearing. Larger corneal, intralimbal, hybrid, custom soft, piggyback, or scleral options may be useful when shape, comfort, stability, or tissue protection requires them.
A scleral design can vault the graft-host junction, but it is not automatically best. Consider endothelial reserve, baseline and post-wear corneal thickness, material Dk, lens thickness, reservoir depth, haptic alignment, wearing time, handling, and follow-up reliability. Use the lowest clearance that safely avoids touch for the selected design and eye.
Cross-Linking Reference
Corneal collagen cross-linking aims to slow progression of ectasia. The conventional epi-off Dresden reference uses riboflavin and 365-nm UVA at 3 mW/cm² for 30 minutes, a total surface fluence of 5.4 J/cm². That reference does not make accelerated, transepithelial, or thin-cornea approaches interchangeable.
The conventional safety model uses at least 400 microns of de-epithelialized, riboflavin-saturated stroma before UVA exposure. Modified protocols for thinner corneas exist and have different evidence, limitations, and safeguards. Protocol selection, riboflavin formulation, irradiation, and medication are surgical decisions. A contact-lens technician should document which procedure occurred and wait for surgeon clearance.
Fitting after Cross-Linking
After treatment, epithelial healing, haze, corneal sensitivity, refraction, and topography can change over time. Do not impose a universal eight-week or three-month fitting date. The surgeon determines when the surface is healed and lens wear may resume. Repeat topography or tomography as directed and expect that parameters may need revision during stabilization.
A pre-existing lens may no longer align after shape change. Inspect for bearing, staining, altered centration, reduced vision, or intolerance before allowing continued wear.
Red Flags and Triage
For every graft wearer, teach urgent response to new redness, sensitivity to light, vision reduction, pain, discharge, or unexplained haze. An advancing endothelial inflammatory line with keratic precipitates and trailing edema is highly concerning for graft rejection. Remove the lens and arrange immediate same-day ophthalmology or corneal-surgeon evaluation. The receiving clinician directs corticosteroid or other medical therapy.
For a post-cross-linking eye, severe pain, worsening haze, epithelial defect, infiltrate, discharge, or loss of vision also needs prompt medical evaluation.
Follow-Up Documentation
Record lens identity, wear time, vault or bearing pattern, graft-host and limbal relationship, landing-zone findings, over-refraction, baseline and post-wear corneal response, symptoms, and communication with the surgeon. Photographs or OCT may improve comparison when clinically indicated.
Exam Traps
A surgical date does not equal clearance to fit.
A scleral lens does not eliminate oxygen risk.
The conventional 400-micron Dresden reference is not a claim that every thinner cornea is untreatable.
Technicians do not prescribe a cross-linking or steroid protocol.
New redness or vision loss in a graft wearer is not a routine refit problem.