Study guide
6.3 Piggyback Systems: Carrier Selection, Power Calculations & Hypoxia Prevention
ABO-NCLE Advanced Contact Lens Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Corneal Topography, Tomography & Anterior Segment Imaging
1.1 Placido-Based Corneal Topography: Axial, Tangential & Elevation Maps 1.2 Corneal Tomography & Scheimpflug Imaging: Anterior/Posterior Elevation & Pachymetry 1.3 Topographic Indices, Asphericity & Cone Localization
2 Chapter 2: Complex Corneal Conditions & Surgical Alterations
2.1 Keratoconus, Pellucid Marginal Degeneration & Keratoglobus 2.2 Post-Keratoplasty (PKP/DALK) & Corneal Cross-Linking (CXL) 2.3 Post-Refractive Ectasia & Post-Refractive Surgery Corneas
3 Chapter 3: Prefit Ocular Surface Evaluation & Candidacy Assessment
3.1 Slit-Lamp Biomicroscopy & Ocular Surface Vital Staining 3.2 Tear Film Dynamics, Dry Eye & Severe Ocular Surface Disease 3.3 Patient History, Visual Needs Analysis & Specialty Lens Selection Strategy
4 Chapter 4: Scleral Lens Design Fundamentals & Sagittal Depth
4.1 Scleral Anatomy, Terminology & Sagittal Depth Principles 4.2 Central Corneal & Limbal Vault Clearance Optimization 4.3 Landing Zone Toricity, Quadrant-Specific Haptics & Edge Profiles
5 Chapter 5: Corneal RGP & Specialty Toric Designs for Irregular Corneas
5.1 Corneal RGP Fitting Philosophies: Apical Clearance vs Bearing vs Three-Point Touch 5.2 Bitoric & High-Toric RGP Calculations: SPE vs CPE & Induced Cylinder 5.3 Lens Materials, Hyper-Dk Polymers & Surface Coatings
6 Chapter 6: Hybrid & Piggyback Contact Lens Systems
6.1 Hybrid Lens Architecture: Rigid Center & Soft Hydrophilic Skirt Fitting 6.2 Hybrid Parameter Selection, Movement & Tear Exchange Optimization 6.3 Piggyback Systems: Carrier Selection, Power Calculations & Hypoxia Prevention
7 Chapter 7: Orthokeratology & Custom Prosthetic Lenses
7.1 Orthokeratology Reverse-Geometry Principles, Jessen Formula & Topographic Patterns 7.2 Prosthetic, Occlusive & Custom Soft Specialty Lenses for Irregular Corneas
8 Chapter 8: Specialty Lens Delivery, Application & Removal Techniques
8.1 Scleral Lens Application Protocols, Plungers & Bubble Prevention 8.2 Scleral, Hybrid & RGP Removal Techniques & Emergency Extraction 8.3 Patient Handling Training, Hygiene & Lens Inspection at Dispense
9 Chapter 9: Filling Solutions, Chemical Disinfection & Wearing Schedules
9.1 Preservative-Free Scleral Reservoir Filling Solutions & Fluid Dynamics 9.2 Disinfection Regimens, Conditioning Systems, Hydra-PEG Care & Adaptation Schedules
10 Chapter 10: Slit-Lamp Fit Evaluation & Optical Troubleshooting
10.1 Settling Time Dynamics & Slit-Lamp Evaluation of Vault Clearance 10.2 Midday Fogging, Tear Reservoir Debris & Lens Surface Wettability 10.3 Over-Refraction, Lenticular Astigmatism & Lens Flexure vs Warpage
11 Chapter 11: In-Office & Laboratory Specialty Lens Modifications
11.1 In-Office Corneal RGP Modifications: Edge Blending, Polishing & Power Changes 11.2 Scleral Parameter Adjustments: Sagittal Depth, Landing Zones & Micro-Vaults 11.3 Ortho-K & Hybrid Fit Problem Solving and Parameter Modifications
12 Chapter 12: Acute Complications, Corneal Pathology & Emergency Triage
12.1 Corneal Hypoxia, Neovascularization & Graft Rejection Recognition 12.2 Mechanical Staining Patterns, Dimple Veiling, Impingement & Conjunctival Prolapse 12.3 Infectious Keratitis, Infiltrative Events & Acute Triage Protocols
13 Chapter 13: Clinical Infection Control, Regulatory Standards & Practice Management
13.1 Diagnostic Fitting Set Decontamination, OSHA & Clinical Infection Control 13.2 FCLCA, Contact Lens Rule, FDA Regulatory Standards & SOAP Documentation
6.3 Piggyback Systems: Carrier Selection, Power Calculations & Hypoxia Prevention
Key Takeaways Explain This Topic AI
A piggyback system places a corneal GP over a soft carrier to improve comfort, centration, or epithelial protection when a single lens is insufficient.
Select the carrier from oxygen performance, thickness, modulus, fit, compatibility, replacement, and patient response; silicone hydrogel is common but not an absolute rule.
The GP and carrier form a coupled optical and mechanical system, so determine final power by on-eye over-refraction rather than simple power addition.
Evaluate both lenses for movement, centration, edge interaction, bubbles, staining, deposits, and oxygen response.
Teach separate, label-compatible care for each lens and avoid transferring an abrasive GP cleaner to a soft carrier unless its labeling permits it.
Last updated: September 2026
6.3 Piggyback Systems and Carrier Selection
A piggyback system places a corneal rigid gas-permeable lens over a soft carrier lens. It may improve comfort, protect a fragile epithelium, or help center a GP that otherwise dislocates. It also adds a second lens, another tear interface, more handling, and greater oxygen resistance.
Indications and Alternatives
Consider piggybacking when a corneal GP provides useful vision but fails because of discomfort, focal interaction, unstable centration, or recurrent epithelial compromise. Before adding a carrier, determine whether a redesigned corneal GP, hybrid, custom soft, or scleral lens could solve the problem more simply.
Active epithelial defect, infection, unexplained edema, or significant inflammation requires medical evaluation before fitting.
Carrier Selection
Assess material oxygen permeability, center thickness, power, modulus, water content, movement, coverage, edge interaction, replacement schedule, and care-system compatibility. Silicone hydrogel carriers are frequently selected for oxygen performance, but no material name alone guarantees safety and no universal rule makes one class mandatory in every case.
A plano, low-plus, or low-minus carrier may alter GP centration differently. Low-minus carriers are sometimes used because their central thickness or geometry supports the GP, but the effect is product-specific. Select by diagnostic behavior, not a universal minus-power rule.
Oxygen through the Stack
Oxygen must pass through the GP, the carrier, and intervening fluid layers. Resistances add in series, so combined oxygen performance is not found by simply adding the two listed Dk/t values. Exact modeling also depends on thickness profiles, tear layers, edge exchange, and wearing conditions.
Use high-oxygen materials and avoid unnecessary thickness, then monitor the actual cornea. Baseline and post-wear pachymetry, edema, microcysts, neovascularization, and tolerance are more meaningful than claiming one combined barrer threshold.
Fit the Carrier
The carrier should cover the cornea, center acceptably, move according to its own design, and avoid limbal or conjunctival injury. Inspect it alone before adding the GP. A carrier that is already tight, folded, damaged, or poorly wetting is not rescued by the rigid lens.
Fit the GP on the Carrier
Place the GP after the carrier stabilizes. Evaluate GP centration, movement, edge clearance, lid interaction, and fluorescein pattern using a method compatible with both lenses. Confirm that the GP does not ride off the carrier or create a focal pressure ring.
Both lenses should be evaluated separately and together. A well-centered stack can still produce hypoxia or trapped debris.
Optics
The soft carrier, its tears, and the GP form a combined optical system. Simple algebraic addition of labeled powers ignores vertex distance, tear lenses, and fit. Perform an on-eye sphero-cylindrical over-refraction after the system stabilizes and communicate the result to the laboratory.
If carrier power is changed for fit or thickness, repeat over-refraction. Do not assume the GP power stays unchanged.
Application and Removal
Teach the sequence that the prescriber chooses. Some patients apply the carrier first and then the GP; removal is commonly performed in reverse. Avoid mixing right and left lenses. Inspect both after removal.
If the GP dislodges while the carrier remains, clean and reapply only according to the written plan. Persistent dislodgement calls for refitting.
Care and Compatibility
Each lens must be cleaned and disinfected with a system compatible with its material and with any surface treatment. A cleaner labeled for rigid lenses may damage or abrade a soft carrier. A soft-lens solution may be inadequate for a GP. Provide separate written instructions and clearly labeled containers when needed.
Avoid tap water and homemade saline. Review rub, rinse, disinfection time, neutralization, storage, replacement, and case care for both lenses.
Follow-Up
Document wear time, comfort, vision, over-refraction, each lens's movement and centration, GP-on-carrier relationship, staining, edema, neovascularization, deposits, and handling. Reassess after realistic wear because a system that looks acceptable immediately may tighten or fog later.
Exam Traps
Silicone hydrogel is common, not automatically mandatory.
Do not add component Dk/t values.
Do not add labeled lens powers to determine final GP power.
Fit and inspect each lens alone and as a system.
Care instructions must distinguish the GP from the soft carrier.
Simplification Check
At each follow-up, ask whether both lenses are still necessary. Improved corneal tolerance, a redesigned GP, a newer hybrid, or a scleral option may permit a simpler system. Conversely, a successful piggyback should not be abandoned solely because it uses two lenses. The decision balances vision, physiology, comfort, handling, cost, replacement access, and the patient's demonstrated adherence.