Study guide

1.5 Signaling, Transport Protocols & Transmission Systems

NENA Emergency Number Professional ENP

Track your progress as you read

Finished sections get a check mark.

1 Introduction

About the NENA ENP Exam

2 Chapter 1: 9-1-1 Evolution & Legacy Network Architecture

1.1 Evolution of 9-1-1 & Central Office Tandem Architecture 1.2 Legacy Location Infrastructure: MSAG, ANI, ALI & ESN/ESZ 1.3 Legacy Network Signaling: CAMA, SS7 & Selective Routing 1.4 Network Design: Originating Service Providers, Local Loops & Transport Facilities 1.5 Signaling, Transport Protocols & Transmission Systems 1.6 Types and Features of 9-1-1 Systems: Basic, Enhanced & NG9-1-1

3 Chapter 2: Modern Location Technologies & MLTS

2.1 Wireless 9-1-1: Phase I, Phase II & Location Accuracy 2.2 Device-Based Location, Supplemental Data & RapidSOS 2.3 MLTS Compliance: Kari's Law & RAY BAUM'S Act

4 Chapter 3: NG911 i3 Core Network & Security

3.1 NG911 Architecture: The ESInet & Core Services 3.2 Border Control Function (BCF) & Security Edge 3.3 SIP Signaling in NG911 (RFC 3261) & Emergency Call Flow

5 Chapter 4: NG911 Location Services & Call Routing

4.1 Location Information Server (LIS) & PIDF-LO 4.2 Emergency Call Routing Function (ECRF) & LoST 4.3 Location Validation Function (LVF) & Legacy Gateways 4.4 NG9-1-1 PSAPs, EIDO, Additional Data & Transitional Elements

6 Chapter 5: Public Safety Radio, Broadband & FirstNet

5.1 Land Mobile Radio (LMR) Architecture & P25 Standards 5.2 Conventional vs. Trunked Radio Systems & Frequency Bands 5.3 Public Safety Broadband, FirstNet & Mission-Critical Services

7 Chapter 6: Call Processing, Accessibility & Protocol Systems

6.1 Call Answering Standards & Answering Point Workflows 6.2 Accessibility: TTY/TDD, Text-to-911 & Real-Time Text (RTT) 6.3 Emergency Protocol Systems & Medical Direction 6.4 PSAP Types & 9-1-1 Call Handling Equipment

8 Chapter 7: Computer Aided Dispatch & Information Systems

7.1 Computer Aided Dispatch (CAD) System Architecture 7.2 CAD Interfaces: Mobile Data, RMS & External Telematics 7.3 Logging Recorders & Synchronized Master Clocks 7.4 Non-Voice Communications & Information Networks 7.5 NENA Standards & Other Documents

9 Chapter 8: GIS for Next Generation 9-1-1

8.1 NG911 GIS Data Layers: Road Centerlines & Address Points 8.2 Boundary Polygons: PSAP, Law, Fire & EMS Jurisdictions 8.3 GIS Data Quality, Topology & Provisioning Workflows 8.4 9-1-1 Databases: Service Orders, ALI & Routing Records, Number Portability & Database Management

10 Chapter 9: Cybersecurity & CJIS Compliance

9.1 PSAP Cybersecurity Frameworks: NENA NG-SEC & NIST CSF 9.2 CJIS Security Policy: Access Control, MFA & Encryption 9.3 TDoS, Ransomware & Cyber Incident Response Planning

11 Chapter 10: Telecommunications Policy, Funding & Civil Rights

10.1 Regulatory Governance: FCC Authority & Part 9 Orders 10.2 9-1-1 Surcharges, Fee Diversion & Federal Grant Programs 10.3 Civil Rights & Language Access: Title VI & ADA Title II 10.4 Telecommunications Service Priority, Public Utility Commissions & the Canadian Framework 10.5 Special Legislative Areas: Alarms, Mass Notification, Pipelines & Other 9-1-1 Laws

12 Chapter 11: PSAP Governance, Strategy & Facility Design

11.1 PSAP Governance Models: Standalone, Co-Located & Consolidated 11.2 Strategic Planning & Performance Management 11.3 PSAP Facility Architecture, Physical Security & Ergonomics 11.4 Management Decision Making & Short-Range, Long-Range & Strategic Planning

13 Chapter 12: Power Redundancy, COOP & Disaster Recovery

12.1 Electrical Power Redundancy: UPS Systems & Generator Sets 12.2 Continuity of Operations Planning (COOP) & Alternate Facilities 12.3 Disaster Recovery, Redundant Connectivity & Evacuation 12.4 Emergency Management: Disaster Types & the Four Phases

14 Chapter 13: Emergency Incident Management & NIMS/ICS

13.1 National Incident Management System (NIMS) & ICS Architecture 13.2 Emergency Operations Centers (EOC) & Incident Command Interfaces 13.3 Mutual Aid & Interagency Interoperability: MACS & MABAS

15 Chapter 14: Procurement, Contracts & Financial Management

14.1 Capital Budgeting, Operational Expense & Financial Auditing 14.2 Public Procurement: RFPs, RFQs & Bid Evaluations 14.3 Vendor Contracting: MSAs, SLAs & Life-Cycle Management

16 Chapter 15: Staffing Models, Scheduling & Wellness

15.1 PSAP Staffing Models: Erlang C & NENA Staffing Calculator 15.2 Shift Scheduling Models, Overtime & Fatigue Mitigation 15.3 Telecommunicator Wellness: CISM, Peer Support & PTSD

17 Chapter 16: Training, CTO Coaching & Quality Assurance

16.1 Adult Learning & Communications Training Officer (CTO) Models 16.2 Quality Assurance & Continuous Quality Improvement (APCO/NENA ANS 1.107) 16.3 Continuing Education, Certifications & Professional Pathways 16.4 Performance Management, Employee Feedback & Customer Service

18 Chapter 17: Employee Relations, Labor Standards & Legal Protections

17.1 Fair Labor Standards Act (FLSA) & Dispatcher Overtime Rules 17.2 EEO, Title VII, FMLA & ADA in the PSAP Workplace 17.3 Progressive Discipline, Just Cause & Union Negotiations 17.4 Employee Relations, Employment Rights & Labor-Management Relations 17.5 Employment Laws: ADEA, Pregnancy Protections, Uniform Guidelines, OSH Act & Canadian Law 17.6 Compensation Laws: Equal Pay Act, COBRA, Social Security Act & Affordable Care Act

19 Chapter 18: Records Governance, Liability & Public Relations

18.1 Public Records, FOIA & Recording Retention Schedules 18.2 Legal Liability, Tort Claims Acts & Immunity Doctrines 18.3 Public Relations, Media Inquiries & Community Outreach

20 Chapter 19: Recruiting, Hiring, Compensation & Retention

19.1 Recruiting: Workforce Needs, Outreach & Sourcing 19.2 Hiring Procedures: Testing, Interview Panels, Agency Tours & Background Checks 19.3 Compensation & Benefits: Job Analysis, Pay Structures & Medical Benefits 19.4 Employee Retention & Succession Planning

1.5 Signaling, Transport Protocols & Transmission Systems

Key Takeaways Explain This Topic AI

Digital voice uses pulse code modulation: 8,000 samples per second × 8 bits per sample = a 64 kbps DS0, and 24 DS0s form a 1.544 Mbps T1.

In-band MF signaling carries ANI on CAMA trunks, DTMF is touch-tone keypad signaling, and SS7 and ISDN carry signaling out of band for faster setup and richer call information.

ISDN BRI provides 2 bearer channels plus a 16 kbps D channel, while North American PRI provides 23 bearer channels plus a 64 kbps D channel on a T1.

Data transport evolved from Frame Relay and ATM to IP and MPLS; carrier-managed MPLS with QoS commonly carries ESInet traffic, and SIP sets up NG9-1-1 sessions.

Trunk concentration lets many lines share fewer trunks, so 9-1-1 trunk groups and selective routers must be engineered for grade of service and redundancy.

Last updated: September 2026

1.5 Signaling, Transport Protocols & Transmission Systems

Quick Answer: Voice and data move through 9-1-1 networks as analog signals (continuous waveforms) or digital signals (discrete bits). Digital telephony samples voice 8,000 times per second at 8 bits per sample, producing the 64 kbps DS0 channel that builds into a T1 (1.544 Mbps) and larger circuits. Signaling tells the network how to set up a call: in-band methods such as MF (used on CAMA trunks) and DTMF (touch-tone), and out-of-band methods such as SS7 and ISDN . Data networks moved from Frame Relay and ATM to IP and MPLS , and NG9-1-1 uses SIP over IP to set up multimedia emergency calls. Trunk concentration lets many lines share fewer trunks, which is why trunk groups must be engineered for a grade of service.

1. Analog vs. Digital Transmission

  • Characteristic Analog Digital
  • Signal form Continuous waveform that mirrors the voice Discrete values (ones and zeros)

Noise Noise and distortion build up with distance and amplification Regenerators restore clean bits, so quality holds over distance

Capacity One conversation per pair or channel unless frequency-division multiplexed Many conversations share a circuit through time-division multiplexing

Examples POTS local loop, analog two-way radio, older CAMA trunks T1/E1, SONET, ISDN, IP networks, P25 digital radio

From Voice to Bits: Pulse Code Modulation (PCM)

Sampling: The voice signal is sampled 8,000 times per second, a little more than twice the highest frequency in the roughly 4 kHz telephone voice band (the Nyquist principle).

Quantizing and encoding: Each sample becomes an 8-bit value. North America uses mu-law companding; most other countries use A-law .

Result: 8,000 samples × 8 bits = 64 kbps , one DS0 channel. This is the same rate as the G.711 codec used in VoIP and NG9-1-1.

The Digital Hierarchy

  • Level Channels Rate Notes
  • DS0 1 64 kbps One voice channel
  • T1 (DS1) 24 DS0s 1.544 Mbps North American standard; framing adds 8 kbps to the 1.536 Mbps payload
  • E1 30 voice + 2 overhead channels 2.048 Mbps International standard
  • DS3 (T3) 28 T1s (672 DS0s) 44.736 Mbps Carrier transport
  • SONET OC-3 3 × STS-1 155.52 Mbps Fiber rings; OC-1 is 51.84 Mbps

SONET rings can switch traffic around a fiber cut in about 50 milliseconds, which is why carriers use them for critical 9-1-1 transport.

  • 2. Signaling Methods
  • In-Band Signaling

Multi-Frequency (MF): Pairs of tones sent over the voice path between switches. CAMA 9-1-1 trunks use MF to pass ANI to the selective router and PSAP (1.3).

Dual-Tone Multi-Frequency (DTMF): The touch-tone keypad. Each key sends two tones at once, one from a low group (697, 770, 852, or 941 Hz) and one from a high group (1209, 1336, 1477, or 1633 Hz). PSAPs meet DTMF in automated menus, voicemail and conferencing systems, and some alarm and paging interfaces.

Out-of-Band Signaling

Signaling System 7 (SS7): A separate packet network, built from signal transfer points, service switching points, and service control points, that sets up and tears down calls, carries calling number information, and supports database lookups such as number portability. Because signaling stays off the voice path, calls set up faster and more information travels with them.

Integrated Services Digital Network (ISDN): Digital access that separates bearer (B) channels from a signaling (D) channel:

Basic Rate Interface (BRI): 2 B channels (64 kbps each) + 1 D channel (16 kbps) = 144 kbps.

Primary Rate Interface (PRI): In North America, 23 B channels + 1 D channel (64 kbps) on a T1. PRI trunks are common for PBX connections and some PSAP call-handling equipment.

Intelligent Networks

The Advanced Intelligent Network (AIN) moved call-processing logic out of individual switches into centralized databases (service control points) reached over SS7. That design enabled services such as toll-free number translation and local number portability lookups.

3. Packet Data Networks: Frame Relay, ATM, IP, and MPLS

Technology How It Works Strengths Status in 9-1-1

Frame Relay Variable-length frames over permanent virtual circuits (PVCs) identified by DLCIs, with a committed information rate (CIR) Cheaper than dedicated lines for bursty data Legacy; once used for ALI and CAD data links, now largely retired

Asynchronous Transfer Mode (ATM) Fixed 53-byte cells (5-byte header + 48-byte payload) over virtual circuits with defined service classes Predictable delay for voice and video Legacy carrier backbones

Internet Protocol (IP) Connectionless packets routed hop by hop, best effort unless QoS is added Universal and flexible; carries voice, video, text, and data Foundation of ESInets and NG9-1-1

MPLS Routers forward packets by short labels assigned at the network edge (often called "Layer 2.5") Traffic engineering, QoS classes, private VPNs, fast reroute Common carrier-managed ESInet transport

Session Initiation Protocol (SIP)

SIP is the signaling protocol that sets up, changes, and ends IP multimedia sessions. In NG9-1-1, SIP carries the call to the ESRP and PSAP with location attached, while the media travels separately over RTP (3.3). SIP trunks also connect modern PBXs and call-handling systems to carriers.

4. Trunk Concentration and Selective Routing

Trunk concentration means many subscriber lines share a smaller number of trunks, because not everyone calls at once. It saves money but creates the possibility of blocking:

A concentration ratio (for example, ten lines per trunk) works only if traffic studies show the busy-hour load fits the trunk group.

9-1-1 trunk groups are engineered to a P.01 grade of service using Erlang B, and planners watch for events such as storms, major incidents, and TDoS attacks that create surges far above the normal busy hour.

The selective router is itself a concentration point: many end offices converge on one tandem, so its redundancy, alternate routing tables, and default routing are critical (1.1, 1.3, and 1.6).

5. Operational Traps & ENP Exam Watch

64 kbps Comes From 8,000 × 8: Know how the DS0 rate is derived and that 24 DS0s make a 1.544 Mbps T1.

MF vs. DTMF: MF passes digits between switches on trunks such as CAMA; DTMF is the subscriber's touch-tone keypad.

SS7 Is Out-of-Band: SS7 signaling travels on a separate network, unlike MF tones on the voice path.

BRI vs. PRI: BRI is 2B+D with a 16 kbps D channel; North American PRI is 23B+D with a 64 kbps D channel on a T1.

ATM Cells Are Fixed Size: ATM cells are always 53 bytes, while Frame Relay frames vary in length.

MPLS Is Not the Public Internet: MPLS networks are carrier-managed with QoS, which is why ESInets often use them.