Study guide

4.2 Lighting & Electrical Systems

NCAA Cabin Crew Member Certificate Examination Nigeria

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Air Law - Nigerian Regulations for Cabin Crew

1.1 Nigerian Aviation Law, the NCAA & the Cabin Crew Licence 1.2 Cabin Crew Licence: Eligibility, the 14 Knowledge Subjects & NCAA Testing 1.3 Class 2 Medical Certification & Decrease of Medical Fitness 1.4 Licence Validity, Renewal, Re-Issue & Re-Establishing Qualification 1.5 Duty Periods, Rest & Fatigue Management under Nig. CARs Part 8 1.6 Required Cabin Crew Complement & Duty Stations 1.7 Psychoactive Substances, Alcohol & Fitness for Duty

2 Chapter 2: Theory of Flight & Aircraft Operations

2.1 Theory of Flight & Major Aircraft Components 2.2 Critical Surfaces, Contamination & De-/Anti-Icing 2.3 Pressurisation & Air Conditioning Systems 2.4 Weight, Balance & Cabin Loading 2.5 Meteorology & Turbulence for Cabin Crew

3 Chapter 3: Aircraft Equipment & Furnishings

3.1 Cabin Crew Stations, Jumpseats & Attendant Panels 3.2 Passenger Seats, Service Units, Information Signs, Markings, Placards & Bassinets

4 Chapter 4: Aircraft Systems

4.1 Communication Systems: Call, Interphone & Passenger Address 4.2 Lighting & Electrical Systems 4.3 Oxygen, Water, Waste & Convenience Systems

5 Chapter 5: Aircraft Exits

5.1 Aircraft Exits: Types, Certification & General Knowledge 5.2 Exits with Slides & Slide-Rafts: Arming, Disarming & Normal Operation 5.3 Exits Without Slides, Window Exits & Exit Row Seating

6 Chapter 6: Crew Member Communication & Co-ordination

6.1 Authority of the Pilot-in-Command & the Sterile Flight Deck 6.2 Routine Communication Signals, Standard Calls & Crew Briefings

7 Chapter 7: Routine Crew Member Duties & Procedures

7.1 Reporting for Duty & Pre-Departure Duties 7.2 Passenger Boarding & Pre-Take-Off Duties 7.3 In-Flight, Landing, Arrival & Intermediate Stops

8 Chapter 8: Passenger Handling Responsibilities

8.1 Infants, Children & Unaccompanied Minors 8.2 Passengers Needing Special Assistance & Special Accommodation 8.3 Carry-On Stowage, Seating Requirements & No-Smoking Rules

9 Chapter 9: Aircraft Emergency Equipment

9.1 Portable Oxygen Cylinders & Protective Breathing Equipment 9.2 Halon 1211, Water Extinguishers & Crash Axes 9.3 Inflatable Life Vests, Slide-Rafts & Survival Equipment 9.4 Emergency Locator Transmitters (ELT), Megaphones & Flashlights

10 Chapter 10: Emergency Procedure Duties & Evacuation

10.1 Pre-Flight Safety Briefings & NITS Emergency Framework 10.2 Brace Positions, Evacuation Commands & Exit Assessment 10.3 Land Evacuation Operations & Able-Bodied Passenger Management 10.4 Ditching & Sea Survival Evacuation Procedures 10.5 Unwarranted Evacuations, Abnormal Situations & Crew Incapacitation 10.6 Learning from Previous Accidents & Incidents, and Occurrence Reporting

11 Chapter 11: In-Flight Fire Fighting

11.1 Chemistry of Fire, Lavatory Smoke Detectors & Waste Bin Extinguishers 11.2 In-Flight Firefighting Tactics, Roles & Hidden Fire Suppression 11.3 Lithium Battery Thermal Runaway & PED Fire Management

12 Chapter 12: Carriage of Dangerous Goods

12.1 ICAO/IATA Dangerous Goods Classes, NOTOC & Passenger Restrictions 12.2 Marking, Labelling, Exceptions, Hidden Dangerous Goods & Cabin Emergency Response

13 Chapter 13: Human Factors & Crew Resource Management

13.1 Fundamental Human Factors Concepts 13.2 Crew Resource Management & Cabin–Flight Deck Co-ordination

14 Chapter 14: Hygiene, Aviation Medicine & First Aid

14.1 Hypoxia, Time of Useful Consciousness & Decompression 14.2 CPR Protocols, AED Operation & Airway Obstruction Management 14.3 First Aid Kit, Emergency Medical Kit & In-Flight Medical Emergencies 14.4 Personal Hygiene, Tropical Hygiene & Food Safety 14.5 Transmissible, Quarantinable & Epidemic Diseases, the Universal Precaution Kit & Disinsection

15 Chapter 15: Aviation Security

15.1 Cabin Security, Threat Levels 1-4 & Cockpit Protection 15.2 Acts of Unlawful Interference, Hijack, Bomb Threat & Security Searches

4.2 Lighting & Electrical Systems

Key Takeaways Explain This Topic AI

Cabin electrical power normally comes from engine-driven generators, with the APU generator, ground power and an aircraft battery as alternatives.

Emergency lighting is independently powered by dedicated batteries, is armed from an attendant panel or the flight deck, and activates automatically on loss of normal power or on impact.

Emergency lighting includes cabin illumination, illuminated exit signs and locators, floor proximity escape path marking and exterior escape route lighting at overwing and door exits.

Cabin lighting is dimmed for night take-off and landing so that occupants' eyes are adapted to darkness before an evacuation would begin.

Electrical smoke, sparks or a burning smell require immediate isolation of the affected item, notification of the flight deck and treatment as a fire until proven otherwise.

Last updated: August 2026

Where cabin power comes from

  • Source When used Notes
  • Engine-driven generators Normal flight Primary AC supply for all systems

APU generator Ground operations, and in flight within limits Allows air conditioning and lighting without ground power

Ground power unit (GPU) At stand with engines and APU shut down External supply plugged into the aircraft

Aircraft battery Loss of generated power, and battery-only ground operations Time-limited; feeds essential busbars only

Ram air turbine (RAT) , on types where fitted Loss of all generated power in flight Deploys into the airflow to supply essential hydraulics and electrics

Dedicated emergency light batteries Emergency lighting only Independent of everything above

The final row is the crucial one for cabin crew. Emergency lighting does not depend on the aircraft's main electrical system. That independence is the whole point: an accident that severs the electrical system must not extinguish the escape path.

Normal cabin lighting

Cabin lighting is normally selectable by zone with bright, dim and night settings, plus separate control of ceiling wash, sidewall lighting, entry and galley lighting, and reading lights.

Two operational rules matter more than the switch layout:

Dim the cabin for take-off and landing at night. Human dark adaptation takes several minutes. If an evacuation begins from a brightly lit cabin into a dark night, occupants are effectively blind at the moment they most need to see. Dimming before departure and before landing means eyes are already adapted.

Window blinds up for take-off and landing. Raised blinds let crew assess conditions outside the aircraft before opening a door, admit external light during an evacuation, and let rescuers see in.

Emergency lighting

Emergency lighting is a certificated system with several elements working together:

  • Element Function
  • General cabin emergency lighting Low-level illumination of the cabin and aisles
  • Illuminated exit signs and exit locators Identify the exits and remain visible in smoke

Floor proximity emergency escape path marking A continuous track at floor level to the exits, visible when smoke fills the cabin from the ceiling down

Exterior emergency lighting Illuminates the overwing escape route and the ground at the base of slides so that evacuees can see where they are going

Slide illumination Lights on or beside the escape slide

Arming and activation. The system is normally armed from the attendant panel or flight deck before flight, and once armed it activates automatically on loss of normal electrical power, and on impact where an inertia switch is fitted. It can also be switched on manually. The control is generally guarded to prevent inadvertent operation.

Duration. Emergency lighting batteries are certificated to power the system for a defined period after activation — long enough for an evacuation and the immediate aftermath, not indefinitely. That is one reason evacuation is completed rather than paused.

Pre-flight checks at each station include confirming the emergency lighting is armed, that no fault caption is illuminated, that exit signs and locators are lit as required, and that floor proximity marking is complete and unobstructed. Missing or damaged escape path marking is a defect for engineering, and bags left in the aisle that cover the marking are a defect cabin crew fix themselves.

Exterior and other lighting

Navigation lights — red on the left wingtip, green on the right, white at the tail, on whenever the aircraft is operating.

Anti-collision beacons — red, switched on before engine start and off after shutdown, which is why the beacon is a useful cue that engines are about to run.

Strobes — high-intensity white lights normally selected for the runway and in flight.

Landing and taxi lights , wing inspection lights — the latter allow the wing to be examined in darkness, useful when checking for contamination or damage.

Logo lights — illuminate the tail fin.

Electrical smoke, sparks and burning smells

Electrical faults are the origin of a significant share of in-flight fires, and many begin in cabin equipment: seat power supplies, in-flight entertainment boxes under seats, galley equipment and passenger devices plugged into cabin outlets.

Immediate actions:

Remove the power. Switch off and, where the operator's procedure permits, isolate the item — for example by pulling the galley or seat power switch, or asking the flight deck to remove power from the affected system. Do not attempt to pull circuit breakers unless the operator's procedure authorises it.

Notify the flight deck immediately with a structured report giving location and description.

Treat it as a fire until proved otherwise. Bring the extinguisher and PBE to the location before you need them.

Do not use water on an energised electrical item. Halon or another approved agent is used until the item is confirmed de-energised; water may then be used on any residual Class A materials such as seat foam and covers.

Watch for re-ignition. A continuous firewatch is maintained on the affected area until landing.

Report and preserve. The item is left in place where safe, the event is reported, and the affected equipment is entered in the technical log so that engineering can trace the fault.

A burning smell with no visible source is not a reason to wait. Smoke and fumes in a cabin can double in a very short time, and the earliest possible report gives the flight crew the option of a diversion while they still have plenty of choices.

Loading diagram... Cabin electrical sources and the independence of emergency lighting