Study guide
2.2 Critical Surfaces, Contamination & De-/Anti-Icing
NCAA Cabin Crew Member Certificate Examination Nigeria
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Air Law - Nigerian Regulations for Cabin Crew
1.1 Nigerian Aviation Law, the NCAA & the Cabin Crew Licence 1.2 Cabin Crew Licence: Eligibility, the 14 Knowledge Subjects & NCAA Testing 1.3 Class 2 Medical Certification & Decrease of Medical Fitness 1.4 Licence Validity, Renewal, Re-Issue & Re-Establishing Qualification 1.5 Duty Periods, Rest & Fatigue Management under Nig. CARs Part 8 1.6 Required Cabin Crew Complement & Duty Stations 1.7 Psychoactive Substances, Alcohol & Fitness for Duty
2 Chapter 2: Theory of Flight & Aircraft Operations
2.1 Theory of Flight & Major Aircraft Components 2.2 Critical Surfaces, Contamination & De-/Anti-Icing 2.3 Pressurisation & Air Conditioning Systems 2.4 Weight, Balance & Cabin Loading 2.5 Meteorology & Turbulence for Cabin Crew
3 Chapter 3: Aircraft Equipment & Furnishings
3.1 Cabin Crew Stations, Jumpseats & Attendant Panels 3.2 Passenger Seats, Service Units, Information Signs, Markings, Placards & Bassinets
4 Chapter 4: Aircraft Systems
4.1 Communication Systems: Call, Interphone & Passenger Address 4.2 Lighting & Electrical Systems 4.3 Oxygen, Water, Waste & Convenience Systems
5 Chapter 5: Aircraft Exits
5.1 Aircraft Exits: Types, Certification & General Knowledge 5.2 Exits with Slides & Slide-Rafts: Arming, Disarming & Normal Operation 5.3 Exits Without Slides, Window Exits & Exit Row Seating
6 Chapter 6: Crew Member Communication & Co-ordination
6.1 Authority of the Pilot-in-Command & the Sterile Flight Deck 6.2 Routine Communication Signals, Standard Calls & Crew Briefings
7 Chapter 7: Routine Crew Member Duties & Procedures
7.1 Reporting for Duty & Pre-Departure Duties 7.2 Passenger Boarding & Pre-Take-Off Duties 7.3 In-Flight, Landing, Arrival & Intermediate Stops
8 Chapter 8: Passenger Handling Responsibilities
8.1 Infants, Children & Unaccompanied Minors 8.2 Passengers Needing Special Assistance & Special Accommodation 8.3 Carry-On Stowage, Seating Requirements & No-Smoking Rules
9 Chapter 9: Aircraft Emergency Equipment
9.1 Portable Oxygen Cylinders & Protective Breathing Equipment 9.2 Halon 1211, Water Extinguishers & Crash Axes 9.3 Inflatable Life Vests, Slide-Rafts & Survival Equipment 9.4 Emergency Locator Transmitters (ELT), Megaphones & Flashlights
10 Chapter 10: Emergency Procedure Duties & Evacuation
10.1 Pre-Flight Safety Briefings & NITS Emergency Framework 10.2 Brace Positions, Evacuation Commands & Exit Assessment 10.3 Land Evacuation Operations & Able-Bodied Passenger Management 10.4 Ditching & Sea Survival Evacuation Procedures 10.5 Unwarranted Evacuations, Abnormal Situations & Crew Incapacitation 10.6 Learning from Previous Accidents & Incidents, and Occurrence Reporting
11 Chapter 11: In-Flight Fire Fighting
11.1 Chemistry of Fire, Lavatory Smoke Detectors & Waste Bin Extinguishers 11.2 In-Flight Firefighting Tactics, Roles & Hidden Fire Suppression 11.3 Lithium Battery Thermal Runaway & PED Fire Management
12 Chapter 12: Carriage of Dangerous Goods
12.1 ICAO/IATA Dangerous Goods Classes, NOTOC & Passenger Restrictions 12.2 Marking, Labelling, Exceptions, Hidden Dangerous Goods & Cabin Emergency Response
13 Chapter 13: Human Factors & Crew Resource Management
13.1 Fundamental Human Factors Concepts 13.2 Crew Resource Management & Cabin–Flight Deck Co-ordination
14 Chapter 14: Hygiene, Aviation Medicine & First Aid
14.1 Hypoxia, Time of Useful Consciousness & Decompression 14.2 CPR Protocols, AED Operation & Airway Obstruction Management 14.3 First Aid Kit, Emergency Medical Kit & In-Flight Medical Emergencies 14.4 Personal Hygiene, Tropical Hygiene & Food Safety 14.5 Transmissible, Quarantinable & Epidemic Diseases, the Universal Precaution Kit & Disinsection
15 Chapter 15: Aviation Security
15.1 Cabin Security, Threat Levels 1-4 & Cockpit Protection 15.2 Acts of Unlawful Interference, Hijack, Bomb Threat & Security Searches
2.2 Critical Surfaces, Contamination & De-/Anti-Icing
Key Takeaways Explain This Topic AI
Critical surfaces are the wings, control surfaces, rotors, propellers, horizontal and vertical stabilisers and, for some types, the upper fuselage — surfaces whose aerodynamic shape must be clean for flight.
The clean aircraft concept prohibits take-off when frost, ice, snow or slush is adhering to critical surfaces, because contamination disrupts airflow and can destroy a large fraction of available lift.
De-icing removes existing contamination and is normally done with heated Type I fluid; anti-icing prevents further accretion using thickened Type II or Type IV fluid and generates a holdover time.
Holdover time starts at the beginning of the final anti-icing application and expires when the fluid can no longer protect the surface; a take-off after expiry requires re-treatment or a check that the aircraft is clean.
In Nigerian operations the more common contamination hazards are heavy rain, harmattan dust and debris, and cold-soaked fuel frost on wings after long high-altitude sectors.
Last updated: August 2026
What counts as a critical surface
A critical surface is any surface whose aerodynamic shape must remain unaltered for the aircraft to fly as certificated. On a transport aeroplane these are:
- The wings , including leading-edge devices and the upper surface;
- All flight control surfaces — ailerons, elevators, rudder, flaps, slats and spoilers;
- The horizontal and vertical stabilisers ;
- Propellers and rotors on turboprop and rotary-wing aircraft;
On many types the upper fuselage , engine inlets and sensor probes.
The wing upper surface is the most sensitive of all. The pressure difference that produces lift depends on smooth, attached airflow across a precise curvature. Roughness there matters far more than the same roughness on the underside.
The clean aircraft concept
The governing principle is simple to state and absolute in application: an aircraft must not take off when frost, ice, snow or slush is adhering to its critical surfaces. Contamination no thicker than coarse sandpaper on the wing upper surface can strip away a substantial proportion of available lift and raise the stalling speed markedly, while simultaneously increasing drag and weight. The effects arrive together and at the worst moment — during rotation, at low altitude and low energy.
Because judgements about "how much is too much" cannot be made reliably by eye, the rule is framed as none , not "a little is acceptable". A pilot-in-command who is not satisfied that the critical surfaces are clean does not depart.
Where contamination comes from in Nigerian operations
Nigeria's climate makes frost and snow rare on the ground, but contamination is not a purely temperate problem.
Source Where it appears Why it matters
Cold-soaked fuel frost Upper wing surface over the fuel tanks, after a long sector at cruise altitude Fuel in the tanks can remain far below freezing after landing. Humid tropical air condenses and freezes on the wing skin above it even at an ambient temperature well above zero
Heavy rain and standing water Wings, engine inlets, runway surface Standing water on the runway lengthens the take-off run and risks aquaplaning; heavy rain reduces visibility and can mask other defects
Harmattan dust Wings, probes, inlets, windows Dust deposits roughen surfaces and can block pitot-static probes and sensors
Insect and bird debris Leading edges, probes Accumulated debris disturbs the boundary layer at the most sensitive part of the wing
Frost, ice, snow, slush Any critical surface Encountered by Nigerian carriers operating to Europe, North Africa in winter, and northern route diversions
Cold-soaked fuel frost is the one that surprises crews at tropical airports. It is a genuine contamination event requiring treatment, even on a warm morning in Lagos or Abuja.
De-icing and anti-icing
The two operations are distinct and are often carried out one after the other.
Operation Purpose Typical fluid Applied
De-icing Removes contamination already adhering to the surface Type I — unthickened, low viscosity, usually heated and often dyed orange Hot, at pressure, to melt and wash the deposit off
Anti-icing Prevents further accretion for a period after treatment Type II (pale yellow) or Type IV (green), thickened, and Type III for slower aircraft Cold or warm, applied as a protective film that sheds during the take-off run
A one-step procedure uses a single heated fluid application to both clean and protect. A two-step procedure de-ices first with Type I, then anti-ices with a thickened fluid, and the second step must follow the first before the surface refreezes.
Holdover time
Holdover time (HOT) is the estimated period for which an anti-icing fluid will prevent the formation of frost or ice and the accumulation of snow on the treated surfaces. Three rules govern it:
The clock starts at the beginning of the final anti-icing application , not when the treatment finishes and not at pushback.
Holdover time shortens in heavy precipitation, in freezing rain, at lower temperatures and in high wind, and published tables are guidance, not a guarantee.
Once the holdover time has expired , the aeroplane may not take off unless it is re-treated, or a pre-take-off contamination check establishes that the critical surfaces are clean.
Thickened anti-icing fluids are designed to shear off during the take-off roll. They rely on the airflow to do so, which is why they are approved by aircraft type and rotation speed, and why residues must be managed by engineering between treatments.
The cabin crew's part
Cabin crew are not qualified to decide whether a wing is acceptable for departure — that judgement belongs to the pilot-in-command and the de-icing crew. But cabin crew occupy the only seats with a direct view of the wing upper surface, and their duty is to observe and report accurately and immediately .
What to report, and how:
Location — left or right wing, inboard or outboard of the engine, leading edge, upper surface, flap or slat.
Appearance — a white frosted film, clear glaze, granular snow, standing water, or a patch of debris.
Extent — describe by reference to something the flight crew can picture, such as "from the wing root to about half way to the engine".
Change — say whether it is growing, and report again if it changes after treatment.
Also report during ground de-icing operations if fluid or fumes enter the cabin, if a passenger reports an unusual smell, and if the treatment appears to have missed part of a surface visible from your position. During de-icing, ventilation is normally reconfigured to keep fumes out of the cabin; passengers should remain seated and the cabin should not be disturbed until the flight deck advises that treatment is complete.