Study guide

2.1 Theory of Flight & Major Aircraft Components

NCAA Cabin Crew Member Certificate Examination Nigeria

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Air Law - Nigerian Regulations for Cabin Crew

1.1 Nigerian Aviation Law, the NCAA & the Cabin Crew Licence 1.2 Cabin Crew Licence: Eligibility, the 14 Knowledge Subjects & NCAA Testing 1.3 Class 2 Medical Certification & Decrease of Medical Fitness 1.4 Licence Validity, Renewal, Re-Issue & Re-Establishing Qualification 1.5 Duty Periods, Rest & Fatigue Management under Nig. CARs Part 8 1.6 Required Cabin Crew Complement & Duty Stations 1.7 Psychoactive Substances, Alcohol & Fitness for Duty

2 Chapter 2: Theory of Flight & Aircraft Operations

2.1 Theory of Flight & Major Aircraft Components 2.2 Critical Surfaces, Contamination & De-/Anti-Icing 2.3 Pressurisation & Air Conditioning Systems 2.4 Weight, Balance & Cabin Loading 2.5 Meteorology & Turbulence for Cabin Crew

3 Chapter 3: Aircraft Equipment & Furnishings

3.1 Cabin Crew Stations, Jumpseats & Attendant Panels 3.2 Passenger Seats, Service Units, Information Signs, Markings, Placards & Bassinets

4 Chapter 4: Aircraft Systems

4.1 Communication Systems: Call, Interphone & Passenger Address 4.2 Lighting & Electrical Systems 4.3 Oxygen, Water, Waste & Convenience Systems

5 Chapter 5: Aircraft Exits

5.1 Aircraft Exits: Types, Certification & General Knowledge 5.2 Exits with Slides & Slide-Rafts: Arming, Disarming & Normal Operation 5.3 Exits Without Slides, Window Exits & Exit Row Seating

6 Chapter 6: Crew Member Communication & Co-ordination

6.1 Authority of the Pilot-in-Command & the Sterile Flight Deck 6.2 Routine Communication Signals, Standard Calls & Crew Briefings

7 Chapter 7: Routine Crew Member Duties & Procedures

7.1 Reporting for Duty & Pre-Departure Duties 7.2 Passenger Boarding & Pre-Take-Off Duties 7.3 In-Flight, Landing, Arrival & Intermediate Stops

8 Chapter 8: Passenger Handling Responsibilities

8.1 Infants, Children & Unaccompanied Minors 8.2 Passengers Needing Special Assistance & Special Accommodation 8.3 Carry-On Stowage, Seating Requirements & No-Smoking Rules

9 Chapter 9: Aircraft Emergency Equipment

9.1 Portable Oxygen Cylinders & Protective Breathing Equipment 9.2 Halon 1211, Water Extinguishers & Crash Axes 9.3 Inflatable Life Vests, Slide-Rafts & Survival Equipment 9.4 Emergency Locator Transmitters (ELT), Megaphones & Flashlights

10 Chapter 10: Emergency Procedure Duties & Evacuation

10.1 Pre-Flight Safety Briefings & NITS Emergency Framework 10.2 Brace Positions, Evacuation Commands & Exit Assessment 10.3 Land Evacuation Operations & Able-Bodied Passenger Management 10.4 Ditching & Sea Survival Evacuation Procedures 10.5 Unwarranted Evacuations, Abnormal Situations & Crew Incapacitation 10.6 Learning from Previous Accidents & Incidents, and Occurrence Reporting

11 Chapter 11: In-Flight Fire Fighting

11.1 Chemistry of Fire, Lavatory Smoke Detectors & Waste Bin Extinguishers 11.2 In-Flight Firefighting Tactics, Roles & Hidden Fire Suppression 11.3 Lithium Battery Thermal Runaway & PED Fire Management

12 Chapter 12: Carriage of Dangerous Goods

12.1 ICAO/IATA Dangerous Goods Classes, NOTOC & Passenger Restrictions 12.2 Marking, Labelling, Exceptions, Hidden Dangerous Goods & Cabin Emergency Response

13 Chapter 13: Human Factors & Crew Resource Management

13.1 Fundamental Human Factors Concepts 13.2 Crew Resource Management & Cabin–Flight Deck Co-ordination

14 Chapter 14: Hygiene, Aviation Medicine & First Aid

14.1 Hypoxia, Time of Useful Consciousness & Decompression 14.2 CPR Protocols, AED Operation & Airway Obstruction Management 14.3 First Aid Kit, Emergency Medical Kit & In-Flight Medical Emergencies 14.4 Personal Hygiene, Tropical Hygiene & Food Safety 14.5 Transmissible, Quarantinable & Epidemic Diseases, the Universal Precaution Kit & Disinsection

15 Chapter 15: Aviation Security

15.1 Cabin Security, Threat Levels 1-4 & Cockpit Protection 15.2 Acts of Unlawful Interference, Hijack, Bomb Threat & Security Searches

2.1 Theory of Flight & Major Aircraft Components

Key Takeaways Explain This Topic AI

Four forces act on an aeroplane in flight: lift opposing weight, and thrust opposing drag; in steady level flight lift equals weight and thrust equals drag.

Lift is generated by accelerated airflow over a cambered wing and rises with airspeed and angle of attack until the critical angle of attack is exceeded, at which point the wing stalls.

Flaps and slats are high-lift devices that increase wing camber and area for take-off and landing, allowing a lower approach speed; spoilers destroy lift after touchdown.

Primary flight controls are ailerons for roll, elevator for pitch and rudder for yaw, corresponding to the aircraft's three axes.

Cabin crew report defects by naming the correct component and location — for example a leading-edge slat, a winglet, a fuselage station or an engine cowl — because the flight crew and engineers act on that description.

Last updated: August 2026

Why a cabin crew member studies aerodynamics

The Nigerian syllabus places theory of flight and major aircraft components at the head of knowledge subject 2 for two practical reasons. First, cabin crew are the operator's eyes on the exterior during walk-round and on the wing during flight, and a report is only useful if it names the right part. Second, passengers ask, and a crew member who can explain a wing flexing in turbulence or the noise of flaps retracting removes anxiety that would otherwise become a cabin management problem.

The four forces

  • Force Direction Produced by Opposed by
  • Lift Perpendicular to the relative airflow, broadly upward The wings Weight
  • Weight Vertically downward through the centre of gravity Gravity acting on mass Lift
  • Thrust Forward along the flight path Engines Drag
  • Drag Rearward, opposing motion Air resistance Thrust

In steady, straight and level flight lift equals weight and thrust equals drag. To climb, thrust is increased so that it exceeds drag; to descend, thrust is reduced. An aeroplane does not "point up and go up" indefinitely — climb performance is bought with engine power.

How a wing makes lift, and how it stops

Air flowing over the curved upper surface of a wing is accelerated and its static pressure falls, while air beneath the wing is slowed and its pressure rises. The pressure difference across the aerofoil produces lift . Lift increases with:

  • Airspeed — lift varies with the square of speed, so doubling speed quadruples lift;
  • Angle of attack — the angle between the wing chord line and the relative airflow;

Air density — cold, dense air at sea level produces more lift than the hot, thin air of a Nigerian afternoon at an inland aerodrome;

Wing area and camber — which is why flaps exist.

Beyond the critical angle of attack the airflow separates from the upper surface and lift collapses. This is a stall . The critical angle is a fixed property of the aerofoil, so an aeroplane can stall at any airspeed and any attitude. Cabin crew normally experience the precursors rather than the event: stick shaker, buffeting, and an immediate nose-down and power-up recovery. Recognise it, secure yourself, and do not stand up.

High-lift devices and the noises passengers hear

Device Where What it does Cabin cue

Flaps Trailing edge of the wing Increase camber and, on Fowler types, wing area, allowing slower flight Rumbling extension noise before take-off and on approach

Slats Leading edge Delay airflow separation and raise the stalling angle Whine and visible gap opening at the front of the wing

Spoilers / speedbrakes Upper wing surface Destroy lift and add drag; deploy on touchdown to put weight on the wheels Panels rising sharply on landing, loud rush of air

Winglets / sharklets Wing tip Reduce induced drag from wingtip vortices, saving fuel Visible upturned tip

Landing gear extension and the associated hydraulic noise typically follows flap extension on approach; thrust reversers produce the loud roar immediately after touchdown.

The three axes and the primary controls

  • Axis Motion Primary control Cabin sensation
  • Longitudinal (nose to tail) Roll Ailerons Banking into a turn
  • Lateral (wingtip to wingtip) Pitch Elevator on the horizontal stabiliser Nose rising on rotation
  • Normal / vertical Yaw Rudder on the vertical stabiliser or fin Sideways slew, felt in a crosswind landing

A coordinated turn combines roll and a small amount of yaw; passengers feel it as an increase in apparent weight, not as a sideways force.

Major components

Fuselage — the pressurised tube carrying the flight deck, cabin, cargo compartments and, on most airliners, the wing centre section and fuel tanks. Cabin crew locate defects by fuselage station , door number or seat row.

Wings — structure, fuel tanks, high-lift devices, flight controls and, on low-wing airliners, main landing gear housing. Wings flex in flight by design; visible movement is normal.

Empennage — the tail assembly: horizontal stabiliser with elevators, vertical stabiliser with rudder, and on some types an auxiliary power unit (APU) exhaust in the tailcone.

Powerplant — turbofan engines suspended on pylons under the wing or mounted on the rear fuselage, comprising fan, compressor, combustion chamber, turbine and exhaust, enclosed by cowlings . Cabin crew must be able to identify engine number by convention — number 1 is the leftmost engine viewed from behind, looking forward.

APU — a small gas turbine, usually in the tailcone, that supplies electrical power and bleed air on the ground and, within limits, in flight.

Landing gear — nose gear and main gear, with brakes and anti-skid; retracted into bays after take-off.

Reporting like a professional

Cabin crew reports carry weight in the technical log. Compare two reports of the same observation:

"Something looks wrong on the wing."

"During climb from Lagos, from seat 22A on the left side, I observed a panel on the wing leading edge, outboard of the engine, standing proud by about a hand's width, with no visible fluid leak."

The second report tells the flight crew which device is affected, which side, which phase and whether fluid is involved. Learn the component names so that the report you make can be acted on.

Loading diagram... Forces, axes and controls