Study guide
7.1 Error Theory and Least Squares
SURCON Professional Examination — Surveyor Nigeria
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The SURCON Professional Examination
1.1 The Surveyor's-Cadre Examination: Papers VI, VII and the Folio 1.2 Enrolment, Pupilage and the Certificate of Experience 1.3 Paper VII: The Professional Essay 1.4 Compiling the Survey Folio 1.5 The Oral Interview and Project Defence 1.6 Contemporary Professional Issues for the Essay and Interview
2 Chapter 2: The SURCON Act (Cap S18 LFN 2004)
2.1 The SURCON Act: Establishment, Membership and Functions 2.2 The Registrar and the Four-Part Register 2.3 Registration of Surveyors, Technologists and Technicians 2.4 Approved Qualifications, Supervision of Training and Appeals 2.5 Professional Discipline: the Disciplinary Committee and the Investigating Panel 2.6 Penalties, Offences and the Right to Practise
3 Chapter 3: Survey Co-ordination Act, Survey Laws and Regulations
3.1 The Survey Co-ordination Act 3.2 State Survey Laws: Plans, Deposit and Protection of Survey Marks 3.3 Survey Regulations: Field Survey Methods and the Standard of Survey 3.4 Survey Regulations: Demarcation and Beacon Construction 3.5 Survey Plans, Records and Information 3.6 Resurvey, Boundary Disputes and the Surveyor as Witness
4 Chapter 4: Land Law for Surveyors
4.1 The Land Use Act 1978: Vesting and Land Administration 4.2 Rights of Occupancy, Certificates of Occupancy and Deemed Grants 4.3 Alienation, Consent and the Nullity Rule 4.4 Revocation and Compensation under Sections 28 to 30 4.5 Land Registration Systems and LIS Integration 4.6 Minerals, Planning and Boundary Legislation
5 Chapter 5: Professional Practice, Ethics and Management
5.1 Professional Ethics and Client Relations 5.2 Charging for Survey Work, Records and the Surveyor's Signature 5.3 Establishing and Running a Survey Practice 5.4 Engagement, Liability, Quality Assurance and Safety
6 Chapter 6: Geodesy and Control
6.1 Minna Datum and Geodetic Reference Frames in Nigeria 6.2 Height Systems and Geoid Undulation 6.3 The Nigeria Transverse Mercator Projection and Grid Belts 6.4 GNSS Positioning, NIGNET and Control Networks 6.5 Geodetic Computations and Network Adjustments 6.6 Geodetic Astronomy and Azimuth Determination 6.7 Datum Transformation in Practice
7 Chapter 7: Computations, Land Surveying and LIS
7.1 Error Theory and Least Squares 7.2 Traverse Computation and Adjustment 7.3 Areas, Volumes and Setting Out 7.4 GIS Spatial Data Models and Topology 7.5 Land Information Systems and Spatial Databases 7.6 Web GIS, Cartography and Spatial Data Infrastructure
8 Chapter 8: Photogrammetry, Remote Sensing, Hydrography and Engineering
8.1 Fundamentals of Aerial Photogrammetry 8.2 UAV Photogrammetry and Structure from Motion 8.3 Satellite Remote Sensing and Image Interpretation 8.4 Image Processing, Classification and LiDAR 8.5 Sounding Systems and Hydrographic Equipment 8.6 Hydrographic Data Reductions and Tidal Datums 8.7 IHO S-44 Standards and Offshore Survey Practice 8.8 Engineering Route Surveying and Curve Geometry 8.9 Tunnelling, Mining Surveys and Deformation Monitoring
7.1 Error Theory and Least Squares
Key Takeaways Explain This Topic AI
Errors divide into gross errors (blunders), systematic errors and random errors; only random errors are treated by adjustment theory.
The standard error of the mean of n equally weighted observations is the standard error of a single observation divided by the square root of n.
For independent quantities the variance of a sum or difference is the sum of the variances, which is why misclosure tolerances scale with the square root of the number of stations.
Least squares minimises the sum of weighted squared residuals and, for normally distributed random errors, yields the most probable values of the unknowns.
Weights are inversely proportional to variances, so a distance measured with twice the standard error carries one quarter of the weight.
Last updated: August 2026
7.1 Error Theory and Least Squares
Why this sits in a SURCON guide: Paper I of the Pupil Surveyor's cadre is Mathematical and Computational Techniques , and the whole of the Survey Regulations' tolerance structure - 1:3,000, 3 seconds times the square root of N, a 30-second range in three azimuths - is applied error theory. You cannot defend a Folio computation without it.
1. Three kinds of error
Type Character Treatment
Gross error (blunder) A mistake: transposed digits, wrong station occupied, misread staff, a tape length omitted Detect and eliminate. Blunders are not adjusted away. Checks - closed circuits, double chaining, repetition on a different zero - exist to find them
Systematic error Follows a physical law and accumulates with a consistent sign: tape not standard, temperature, sag, slope, collimation, refraction, index error Model and correct , or eliminate by procedure
Random error Small, unpredictable in sign, following a normal distribution; the irreducible residue after blunders are removed and systematics corrected Adjust , by least squares
The Survey Regulations attack all three. Regulation 5(A) requires one face right and one face left , which cancels collimation and trunnion-axis error - systematic. Regulation 4 requires closed circuits and, where closure is impossible, double chaining in opposite directions plus a check azimuth - blunder detection. Regulation 5(C) requires corrections for standard, slope, and where necessary temperature and sag - systematic modelling. What is left is random, and that is what an adjustment distributes.
2. Measures of precision
For n n n observations x i x_i x i of a single quantity with mean x ˉ \bar{x} x ˉ :
Standard error of a single observation σ = ∑ v i 2 n − 1 , v i = x i − x ˉ \sigma = \sqrt{\frac{\sum v_i^2}{n-1}}, \qquad v_i = x_i - \bar{x} σ = n − 1 ∑ v i 2 , v i = x i − x ˉ
Standard error of the mean σ x ˉ = σ n \sigma_{\bar{x}} = \frac{\sigma}{\sqrt{n}} σ x ˉ = n σ
The second is the reason regulation 5(B) requires three separate sun or star observations for azimuth. Three observations reduce the standard error of the mean by a factor of 3 ≈ 1.73 \sqrt{3} \approx 1.73 3 ≈ 1.73 , and - more importantly - three values allow a range check. Two observations that disagree tell you there is a problem but not which one is wrong.
Worked example. Three azimuth observations give 127 deg 14' 20", 127 deg 14' 42" and 127 deg 14' 31". The mean is 127 deg 14' 31" and the range is 22 seconds - inside the regulation 5(B) limit of 30 seconds, so the set is acceptable. Residuals are -11", +11" and 0"; σ = ( 121 + 121 + 0 ) / 2 = 11.0 ′ ′ \sigma = \sqrt{(121+121+0)/2} = 11.0'' σ = ( 121 + 121 + 0 ) /2 = 11. 0 ′′ , and σ x ˉ = 11.0 / 3 = 6.4 ′ ′ \sigma_{\bar{x}} = 11.0/\sqrt{3} = 6.4'' σ x ˉ = 11.0/ 3 = 6. 4 ′′ .
3. Propagation of error
For a function y = f ( x 1 , x 2 , … , x n ) y = f(x_1, x_2, \dots, x_n) y = f ( x 1 , x 2 , … , x n ) of independent quantities, σ y 2 = ( ∂ f ∂ x 1 ) 2 σ 1 2 + ( ∂ f ∂ x 2 ) 2 σ 2 2 + ⋯ \sigma_y^2 = \left(\frac{\partial f}{\partial x_1}\right)^2\sigma_1^2 + \left(\frac{\partial f}{\partial x_2}\right)^2\sigma_2^2 + \cdots σ y 2 = ( ∂ x 1 ∂ f ) 2 σ 1 2 + ( ∂ x 2 ∂ f ) 2 σ 2 2 + ⋯
Three consequences carry most of the practical weight:
Sums and differences. For y = x 1 ± x 2 y = x_1 \pm x_2 y = x 1 ± x 2 , σ y 2 = σ 1 2 + σ 2 2 \sigma_y^2 = \sigma_1^2 + \sigma_2^2 σ y 2 = σ 1 2 + σ 2 2 . Variances add, standard errors do not.
A chain of n n n equal steps. If each of n n n angles carries standard error σ \sigma σ , the accumulated error in the final bearing is σ t o t a l = σ n \sigma_{total} = \sigma\sqrt{n} σ t o t a l = σ n
That is exactly the form of regulation 5(A)(iii): maximum misclosure of bearings = 3 seconds times the square root of N . The regulation is a tolerance of three seconds per station propagated through n n n stations, and it caps N N N at 30 because beyond that the accumulated tolerance ceases to be a useful check.
The same form appears in levelling, where loop misclosure tolerances are conventionally expressed as a constant times k \sqrt{k} k with k k k the route length in kilometres - because a levelling line is a chain of independent set-ups.
Products. For y = x 1 x 2 y = x_1x_2 y = x 1 x 2 , relative errors combine: ( σ y y ) 2 = ( σ 1 x 1 ) 2 + ( σ 2 x 2 ) 2 \left(\frac{\sigma_y}{y}\right)^2 = \left(\frac{\sigma_1}{x_1}\right)^2 + \left(\frac{\sigma_2}{x_2}\right)^2 ( y σ y ) 2 = ( x 1 σ 1 ) 2 + ( x 2 σ 2 ) 2 . This is why area accuracy degrades faster than linear accuracy, and why regulation 31(j) reduces the number of decimals stated as parcels grow.
4. Weights
Where observations are of unequal quality, weight is inversely proportional to variance: w i = σ 0 2 σ i 2 w_i = \frac{\sigma_0^2}{\sigma_i^2} w i = σ i 2 σ 0 2
where σ 0 \sigma_0 σ 0 is an arbitrary reference ("the standard error of unit weight"). Doubling the standard error of an observation reduces its weight to one quarter .
Common weighting conventions:
Levelling - weight inversely proportional to route length (a longer line has more set-ups and more accumulated variance).
Traverse angles - equal weight where observed identically; otherwise inversely proportional to variance.
Distances - EDM standard error is typically quoted as a + b D a + b\,D a + b D (a constant plus a proportional part), so weight declines with length but not linearly.
- 5. Least squares
- The principle
Where there are more observations than the minimum needed - redundancy - the observations will not be perfectly consistent. Least squares selects the set of values for the unknowns that minimises the sum of the weighted squared residuals : ∑ w i v i 2 → minimum \sum w_i v_i^2 \rightarrow \text{minimum} ∑ w i v i 2 → minimum
For observations whose random errors are normally distributed, this yields the most probable values of the unknowns. That is its justification - not that it is convenient, but that it is the maximum-likelihood estimator under the normal error model that random errors actually follow.
The observation-equation form
Linearise each observation about approximate values of the unknowns: v = A x − l \mathbf{v} = \mathbf{A}\mathbf{x} - \mathbf{l} v = Ax − l
where A \mathbf{A} A is the design matrix of partial derivatives, x \mathbf{x} x the vector of corrections to the approximate unknowns, l \mathbf{l} l the vector of observed-minus-computed values, and v \mathbf{v} v the residuals. With weight matrix W \mathbf{W} W , the normal equations are A T W A x = A T W l \mathbf{A}^T\mathbf{W}\mathbf{A}\,\mathbf{x} = \mathbf{A}^T\mathbf{W}\mathbf{l} A T WA x = A T Wl x = ( A T W A ) − 1 A T W l \mathbf{x} = (\mathbf{A}^T\mathbf{W}\mathbf{A})^{-1}\mathbf{A}^T\mathbf{W}\mathbf{l} x = ( A T WA ) − 1 A T Wl
What comes out besides coordinates
An adjustment that returns only adjusted coordinates has wasted most of its value. The by-products are the quality control:
Residuals v \mathbf{v} v - a residual far larger than its expected size flags a probable blunder in that observation.
Standard error of unit weight , σ 0 = v T W v r \sigma_0 = \sqrt{\dfrac{\mathbf{v}^T\mathbf{W}\mathbf{v}}{r}} σ 0 = r v T Wv , where r r r is the redundancy (observations minus unknowns). If this comes out far from 1, either the weighting was wrong or a blunder survived.
The cofactor matrix ( A T W A ) − 1 (\mathbf{A}^T\mathbf{W}\mathbf{A})^{-1} ( A T WA ) − 1 - from which the standard errors of the adjusted coordinates and the error ellipses are computed. The error ellipse tells you the direction in which the network is weak, which no single accuracy figure can.
Redundancy numbers - how much each observation is checked by the others. An observation with near-zero redundancy is unchecked, and a blunder in it will pass undetected.
Minimum constraint versus over-constrained
A minimally constrained adjustment fixes only what is necessary to define position, orientation and scale, and therefore reveals the internal quality of the observations. An over-constrained adjustment holds several control points fixed and forces the network onto them, absorbing any distortion in the control into the residuals.
Run the minimally constrained adjustment first . If the internal fit is good but the over-constrained fit is poor, the problem is in the control, not in your observations - which, under regulation 6, is exactly the situation in which a full report must be made to the Surveyor-General so that inquiry may be made into the positions of the old marks.