Study guide
8.1 Fundamentals of Aerial Photogrammetry
SURCON Professional Examination — Surveyor Nigeria
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The SURCON Professional Examination
1.1 The Surveyor's-Cadre Examination: Papers VI, VII and the Folio 1.2 Enrolment, Pupilage and the Certificate of Experience 1.3 Paper VII: The Professional Essay 1.4 Compiling the Survey Folio 1.5 The Oral Interview and Project Defence 1.6 Contemporary Professional Issues for the Essay and Interview
2 Chapter 2: The SURCON Act (Cap S18 LFN 2004)
2.1 The SURCON Act: Establishment, Membership and Functions 2.2 The Registrar and the Four-Part Register 2.3 Registration of Surveyors, Technologists and Technicians 2.4 Approved Qualifications, Supervision of Training and Appeals 2.5 Professional Discipline: the Disciplinary Committee and the Investigating Panel 2.6 Penalties, Offences and the Right to Practise
3 Chapter 3: Survey Co-ordination Act, Survey Laws and Regulations
3.1 The Survey Co-ordination Act 3.2 State Survey Laws: Plans, Deposit and Protection of Survey Marks 3.3 Survey Regulations: Field Survey Methods and the Standard of Survey 3.4 Survey Regulations: Demarcation and Beacon Construction 3.5 Survey Plans, Records and Information 3.6 Resurvey, Boundary Disputes and the Surveyor as Witness
4 Chapter 4: Land Law for Surveyors
4.1 The Land Use Act 1978: Vesting and Land Administration 4.2 Rights of Occupancy, Certificates of Occupancy and Deemed Grants 4.3 Alienation, Consent and the Nullity Rule 4.4 Revocation and Compensation under Sections 28 to 30 4.5 Land Registration Systems and LIS Integration 4.6 Minerals, Planning and Boundary Legislation
5 Chapter 5: Professional Practice, Ethics and Management
5.1 Professional Ethics and Client Relations 5.2 Charging for Survey Work, Records and the Surveyor's Signature 5.3 Establishing and Running a Survey Practice 5.4 Engagement, Liability, Quality Assurance and Safety
6 Chapter 6: Geodesy and Control
6.1 Minna Datum and Geodetic Reference Frames in Nigeria 6.2 Height Systems and Geoid Undulation 6.3 The Nigeria Transverse Mercator Projection and Grid Belts 6.4 GNSS Positioning, NIGNET and Control Networks 6.5 Geodetic Computations and Network Adjustments 6.6 Geodetic Astronomy and Azimuth Determination 6.7 Datum Transformation in Practice
7 Chapter 7: Computations, Land Surveying and LIS
7.1 Error Theory and Least Squares 7.2 Traverse Computation and Adjustment 7.3 Areas, Volumes and Setting Out 7.4 GIS Spatial Data Models and Topology 7.5 Land Information Systems and Spatial Databases 7.6 Web GIS, Cartography and Spatial Data Infrastructure
8 Chapter 8: Photogrammetry, Remote Sensing, Hydrography and Engineering
8.1 Fundamentals of Aerial Photogrammetry 8.2 UAV Photogrammetry and Structure from Motion 8.3 Satellite Remote Sensing and Image Interpretation 8.4 Image Processing, Classification and LiDAR 8.5 Sounding Systems and Hydrographic Equipment 8.6 Hydrographic Data Reductions and Tidal Datums 8.7 IHO S-44 Standards and Offshore Survey Practice 8.8 Engineering Route Surveying and Curve Geometry 8.9 Tunnelling, Mining Surveys and Deformation Monitoring
8.1 Fundamentals of Aerial Photogrammetry
Key Takeaways Explain This Topic AI
Aerial photogrammetry relies on central projection geometry where scale vary across terrain elevation according to S = f / (H - h).
Standard aerial flight planning requires 60% forward overlap for stereoscopic coverage and 30% side overlap for strip alignment.
Stereoscopic 3D parallax p = B * f / (H - h) enables precise height and elevation determination across overlapping photogrammetric pairs.
Camera calibration defines interior orientation parameters including principal point coordinates, focal length, radial distortion, and decentering distortion.
Relief displacement d = r * h / H causes object points elevated above datum to displace radially outward from the principal point.
Last updated: August 2026
Fundamentals of Aerial Photogrammetry
Aerial photogrammetry is the science and art of obtaining reliable quantitative measurements and spatial information about physical objects and terrain through the recording, measuring, and interpreting of aerial photographic images. In Nigerian surveying practice, regulated under the Surveyors Council of Nigeria (SURCON) standards, aerial photogrammetry forms the foundation for medium- and large-scale topographic mapping, boundary mapping, and national spatial data infrastructure.
Unlike map projections which are orthogonal (parallel rays projected perpendicularly onto a horizontal plane), aerial photographs are central perspective projections . In a central projection, all light rays pass through a single point—the rear nodal point of the camera lens. Consequently, the scale of an aerial photograph is not uniform across the image; it varies continuously as a function of focal length, flying height, and ground elevation variations.
Photogrammetric Scale & Geometry
The scale of a vertical aerial photograph is defined as the ratio of an image distance ( d d d ) to the corresponding ground distance ( D D D ). From the geometric similarity of perspective triangles formed by the lens camera station and the ground terrain, photo scale S S S is expressed as: S = f H − h S = \frac{f}{H - h} S = H − h f
Where:
f f f is the calibrated focal length of the camera lens (typically 152.4 mm 152.4\text{ mm} 152.4 mm or 6 inches 6\text{ inches} 6 inches for traditional metric frame cameras).
H H H is the flying height of the aircraft above mean sea level (MSL) or reference datum.
h h h is the elevation of the ground point above the reference datum.
H − h H - h H − h represents the flying height above terrain ( H g H_g H g ).
When terrain elevation h h h varies, scale varies accordingly. Points at higher terrain elevations are closer to the camera and appear at a larger scale, while points in lower valleys appear at a smaller scale. Average photo scale S avg S_{\text{avg}} S avg is calculated using the average terrain elevation h avg h_{\text{avg}} h avg of the project site.
Parameter Description Typical Metric Metric Camera Values
Focal Length ( f f f ) Distance from lens rear nodal point to focal plane 152.4 mm 152.4\text{ mm} 152.4 mm (Wide angle), 210 mm 210\text{ mm} 210 mm (Normal angle)
Format Size Physical dimensions of image frame 230 mm × 230 mm 230\text{ mm} \times 230\text{ mm} 230 mm × 230 mm ( 9 " × 9 " 9" \times 9" 9" × 9" )
Flying Height ( H H H ) Aircraft altitude above datum 1 , 000 m 1,000\text{ m} 1 , 000 m to 6 , 000 m 6,000\text{ m} 6 , 000 m depending on target scale
Photo Scale Factor ( m m m ) Inverse of photo scale ( 1 / S 1/S 1/ S ) e.g., m = 10 , 000 m = 10,000 m = 10 , 000 for 1 : 10 , 000 1:10,000 1 : 10 , 000 scale
Flight Design & Overlap Geometry
Photogrammetric flight planning requires methodical arrangement of parallel flight lines (strips) to ensure complete stereoscopic coverage without gaps (holidays). Flight planning parameters dictate the number of photos, exposure intervals, and line spacing.
1. Forward Overlap (Endlap)
To view photographs in 3D stereoscopic vision, every point on the ground must appear on at least two consecutive photographs along the flight line. Standard flight specifications require a 60% forward overlap (with acceptable tolerance of 55 % − 65 % 55\% - 65\% 55% − 65% ). This creates a stereoscopic model in the overlap area known as the stereopair . The distance between consecutive exposure stations is called the air base ( B B B ) . Endlap = ( 1 − B W ) × 100 % \text{Endlap} = \left(1 - \frac{B}{W}\right) \times 100\% Endlap = ( 1 − W B ) × 100%
Where W W W is the ground coverage width of a photograph parallel to the flight line.
2. Side Overlap (Sidelap)
Adjacent parallel flight strips must overlap laterally to bind individual stereo models into a unified block network. Standard specifications dictate a 30% side overlap (ranging between 20 % − 40 % 20\% - 40\% 20% − 40% ). The lateral spacing between flight lines is called strip spacing ( W strip W_{\text{strip}} W strip ) .
3. Aircraft Crab and Drift
Wind during flight operations induces rotational and positional distortions:
Drift Angle : Lateral displacement of the aircraft off the planned flight line caused by crosswinds. Drift creates unphotographed gaps between strips if not corrected.
Crab Angle : The deliberate angular rotation of the aircraft fuselage heading relative to the actual track line to compensate for crosswinds. If the camera mount is not rotated into the wind vector, the image edges become skewed relative to the flight line, reducing effective stereoscopic overlap.
Stereoscopy & 3D Parallax
Stereoscopy is the phenomenon of perceiving 3D depth by viewing two overlapping images of the same terrain taken from different exposure stations. The human eyes, separated by an inter-pupillary distance of approximately 63 mm 63\text{ mm} 63 mm , view the object from slightly different angles, creating retinal parallax that the brain interprets as 3D depth.
In photogrammetry, absolute stereoscopic parallax ( p p p ) is defined as the algebraic difference in the direction of two images of a point on two successive photographs taken from endpoints of a baseline. For a pair of aligned vertical photographs: p = x − x ′ p = x - x' p = x − x ′
Where x x x is the coordinate of the point on the left photograph and x ′ x' x ′ is the coordinate of the same point on the right photograph relative to their respective principal points.
The fundamental parallax equation for height determination is: p = B ⋅ f H − h p = \frac{B \cdot f}{H - h} p = H − h B ⋅ f
Rearranging to solve for terrain elevation h h h above datum or point elevation: h = H − B ⋅ f p h = H - \frac{B \cdot f}{p} h = H − p B ⋅ f
Differencing two points gives the height difference Δ h \Delta h Δ h between a top point ( T T T ) and bottom point ( B B B ): Δ h = Δ p ⋅ ( H − h B ) p T \Delta h = \frac{\Delta p \cdot (H - h_B)}{p_T} Δ h = p T Δ p ⋅ ( H − h B )
Where Δ p = p T − p B \Delta p = p_T - p_B Δ p = p T − p B is the differential parallax between the top and bottom of the feature.
Camera Calibration & Interior Orientation
Photogrammetric metric cameras undergo rigorous calibration to determine the geometric characteristics of the optical system. Interior Orientation (IO) reconstructs the bundle of rays inside the camera at the exact instant of exposure. The calibration certificate provides four key parameters:
Calibrated Focal Length ( f f f ) : The precise distance from the rear nodal point of the lens to the plane of the image focal plane, optimized to equalize positive and negative lens distortions across the field of view.
Principal Point Coordinates ( x 0 , y 0 x_0, y_0 x 0 , y 0 ) : The origin point where the optical axis intersects the image plane. In an ideal camera, this coincides with the intersection of fiducial mark lines; calibration provides small offsets ( Δ x 0 , Δ y 0 ) (\Delta x_0, \Delta y_0) ( Δ x 0 , Δ y 0 ) .
Radial Lens Distortion ( K 1 , K 2 , K 3 K_1, K_2, K_3 K 1 , K 2 , K 3 ) : Symmetric optical aberration caused by lens refraction variations, pushing image points radially inward (barrel distortion) or outward (pincushion distortion) from the principal point. Radial distortion Δ r \Delta r Δ r is modeled by: Δ r = K 1 r 3 + K 2 r 5 + K 3 r 7 \Delta r = K_1 r^3 + K_2 r^5 + K_3 r^7 Δ r = K 1 r 3 + K 2 r 5 + K 3 r 7
Decentering Lens Distortion ( P 1 , P 2 P_1, P_2 P 1 , P 2 ) : Asymmetric distortion resulting from physical misalignment or tilt of individual lens elements during camera assembly.
Relief Displacement Equation
Relief displacement ( d d d ) is the shift or displacement in the position of an image point caused by the elevation of the feature above or below the selected reference datum. Relief displacement occurs radially outward from the principal point (or nadir point in a strictly vertical photo).
The mathematical formula governing relief displacement is: d = r ⋅ h H d = \frac{r \cdot h}{H} d = H r ⋅ h
Where:
d d d is the magnitude of relief displacement measured on the photograph.
r r r is the radial distance from the principal point to the top of the displaced image feature.
h h h is the height of the feature above the reference datum.
H H H is the flying height of the aircraft above the same reference datum.
Key characteristics of relief displacement:
Relief displacement is zero at the principal point ( r = 0 r = 0 r = 0 ).
It increases linearly with distance r r r from the principal point toward the image margins.
It increases directly with feature height h h h .
It decreases inversely with higher flying altitudes H H H .
Points above datum displace outward ; points below datum displace inward .