Study guide

7.4 Dosage, Dilution & Tank Mixing Calculations

New Hampshire Pesticide Applicator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New Hampshire Pesticide Law & Regulatory Authority

1.1 RSA 430, the Pesticide Control Board & the Division 1.2 FIFRA, EPA Registration & the Federal-State Framework 1.3 NH Product Classification: Prohibited, Prohibited-Limited & Restricted Use

2 Chapter 2: Certification, Licensing & Recertification

2.1 Applicator Classes, Certification Categories & Credentials 2.2 The Examination Battery, Passing Grades & Retakes 2.3 Annual Renewal, the 5-Year Recertification Cycle & Credits

3 Chapter 3: New Hampshire Application & Water-Protection Rules

3.1 Manner of Application & Lawful Label Deviations (Pes 501-504) 3.2 Public Water Supply Setbacks & Special Permits (Pes 502.03-502.05) 3.3 Shoreline Setbacks, Site Management Areas & Chemigation (Pes 1000, 502.06) 3.4 Rights-of-Way, Aerial, Aquatic & Turf Notification Rules

4 Chapter 4: Recordkeeping, Storage, Transport & Disposal

4.1 Recordkeeping & Reporting (Pes 900) 4.2 Transporting & Storing Pesticides Securely (Pes 800) 4.3 Mixing, Loading, Spills & Emergency Response (Pes 805) 4.4 Container Rinsing, Reuse & Pesticide Disposal (Pes 801)

5 Chapter 5: Pesticide Labels & Labeling

5.1 Pesticide Label Anatomy, Parts & Terminology 5.2 Signal Words, Toxicity Categories & Precautionary Statements 5.3 Directions for Use, REI, PHI & Tolerances

6 Chapter 6: Pests, Pest Biology & Integrated Pest Management

6.1 Pest Types, Identification & Characteristic Damage 6.2 Pest Biology, Control Methods & Why Applications Fail 6.3 IPM Principles, Thresholds & Tactics

7 Chapter 7: Pesticides, Formulations & Calculations

7.1 Types of Pesticides, Modes of Action & Resistance Management 7.2 Pesticide Formulations & Their Characteristics 7.3 Adjuvants, Compatibility & Tank Mixing 7.4 Dosage, Dilution & Tank Mixing Calculations

8 Chapter 8: Human Hazards, Safety & Worker Protection

8.1 Toxicology, Hazard Metrics & Health Effects 8.2 Routes of Exposure & Causes of Pesticide Accidents 8.3 Poisoning Symptoms, First Aid & Heat Stress 8.4 PPE Selection, Inspection & Maintenance 8.5 The Worker Protection Standard & New Hampshire Pes 1100

9 Chapter 9: Pesticides in the Environment

9.1 Pesticide Environmental Fate & Transport 9.2 Groundwater & Surface Water Protection 9.3 Spray Drift Mechanisms, Meteorology & Mitigation 9.4 Pollinator Protection, Wildlife & Endangered Species

10 Chapter 10: Application Equipment, Calibration & Technique

10.1 Application Equipment, Components & Maintenance 10.2 Nozzle Anatomy, Spray Patterns & Droplet Spectra 10.3 Sprayer Calibration Methods & Variables 10.4 Granular Calibration, Application Technique & Professionalism

7.4 Dosage, Dilution & Tank Mixing Calculations

Key Takeaways Explain This Topic AI

Determining formulated product quantities from active ingredient (a.i.) recommendations requires dividing target pounds a.i. by formulation concentration: dry formulations divide by decimal percentage, while liquid formulations divide by pounds a.i. per gallon.

Tank mix coverage is calculated by dividing total tank liquid capacity by the calibrated application rate in Gallons Per Acre (Acres per Tank = Tank Gallons / GPA).

The total quantity of commercial pesticide product added to a full tank equals the acres covered per tank multiplied by the labeled product rate per acre.

Accurate land area calculations require specific geometric formulas for rectangular (L x W), triangular (0.5 x Base x Height), and circular (pi x r^2) target sites, dividing square footage by 43,560 to find acres.

Percentage dilution calculations for spot treatments and hand-wand applications determine required pesticide concentrate using: Fluid Ounces = Target Gallons x 128 fl oz/gal x Percent Concentration (in decimal form).

Last updated: September 2026

7.4 Dosage, Dilution & Tank Mixing Calculations

Precision in mathematical calculations is a fundamental core competency for licensed pesticide applicators in New Hampshire. Calculating dosages incorrectly causes chemical under-dosing that fails to suppress target pests, or chemical over-dosing that inflicts crop phytotoxicity, violates federal tolerance residues, and contaminates sensitive groundwater resources. Applicators must master active ingredient conversions, tank mix capacities, geometric area calculations, and spot dilution formulas.

Formulated Product vs. Active Ingredient (a.i.)

Pesticide label directions specify application rates in one of two ways:

Formulated Commercial Product Rate : The label directly states the volume or weight of product as sold in the jug or bag (e.g., "Apply 2.5 pints of Treflan per acre" or "Apply 3.0 ounces of Barricade 65WG per 1,000 sq ft").

Active Ingredient (a.i.) Rate : The label states the weight of the pure toxic chemical to be applied per acre (e.g., "Apply 1.5 pounds of chlorothalonil active ingredient per acre"). The applicator must calculate how much formulated product is required to supply that weight of active ingredient.

Formulation Nomenclature Rules

Dry Formulations (WP, WDG, DF, SP, G) : The number in the trade name represents the percentage of active ingredient by weight .

Example : Captan 80 WDG contains 80% active ingredient (0.80 lb a.i. per pound of product).

Example : Sevin 50 WP contains 50% active ingredient (0.50 lb a.i. per pound of product).

Liquid Formulations (EC, SC, F, L) : The number in the trade name represents the pounds of active ingredient per gallon of liquid product .

Example : Dursban 4 EC contains 4.0 pounds of active ingredient per gallon .

Example : Atrazine 4L contains 4.0 pounds of active ingredient per gallon .

Example : Roundup PRO (3 lb a.i./gal glyphosate acid equivalent).

Active Ingredient Conversion Calculations +-------------------------------------------------------------------------+

  • | ACTIVE INGREDIENT CONVERSION FORMULAS |
  • +-------------------------------------------------------------------------+
  • | 1. DRY FORMULATIONS (WP, WDG, SP, G): |
  • | |
  • | Pounds of Formulated Product = Pounds a.i. Recommended |
  • | ------------------------ |
  • | Percent a.i. (as decimal) |
  • | |
  • | 2. LIQUID FORMULATIONS (EC, SC, F, L): |
  • | |
  • | Gallons of Formulated Product = Pounds a.i. Recommended |
  • | ----------------------- |
  • | Pounds a.i. per Gallon |
  • +-------------------------------------------------------------------------+
  • Dry Formulation Example

A field corn grower needs to apply 2.0 pounds of active ingredient per acre using Atrazine 80 WP (80% wettable powder). Pounds of 80 WP per Acre = 2.0 lb a.i. 0.80 = 2.5 pounds of product per acre \text{Pounds of 80 WP per Acre} = \frac{2.0\text{ lb a.i.}}{0.80} = 2.5\text{ pounds of product per acre} Pounds of 80 WP per Acre = 0.80 2.0 lb a.i. ​ = 2.5 pounds of product per acre

If the grower is treating a 40-acre field : Total Product Needed = 40 acres × 2.5 lb/acre = 100 pounds of Atrazine 80 WP \text{Total Product Needed} = 40\text{ acres} \times 2.5\text{ lb/acre} = 100\text{ pounds of Atrazine 80 WP} Total Product Needed = 40 acres × 2.5 lb/acre = 100 pounds of Atrazine 80 WP

Liquid Formulation Example

An orchardist needs to apply 3.0 pounds of active ingredient per acre to control apple scab using a fungicide formulated as 4 EC (4 pounds a.i. per gallon). Gallons of 4 EC per Acre = 3.0 lb a.i. 4.0 lb a.i./gal = 0.75 gallon per acre \text{Gallons of 4 EC per Acre} = \frac{3.0\text{ lb a.i.}}{4.0\text{ lb a.i./gal}} = 0.75\text{ gallon per acre} Gallons of 4 EC per Acre = 4.0 lb a.i./gal 3.0 lb a.i. ​ = 0.75 gallon per acre

Converting 0.75 gallons into quarts (since 1 gallon = 4 quarts = 128 fl oz): Quarts per Acre = 0.75 × 4 = 3.0 quarts per acre (or 96 fl oz/acre) \text{Quarts per Acre} = 0.75 \times 4 = 3.0\text{ quarts per acre (or 96 fl oz/acre)} Quarts per Acre = 0.75 × 4 = 3.0 quarts per acre (or 96 fl oz/acre)

If the orchard block is 12 acres : Total Product Needed = 12 acres × 0.75 gal/acre = 9.0 gallons of 4 EC \text{Total Product Needed} = 12\text{ acres} \times 0.75\text{ gal/acre} = 9.0\text{ gallons of 4 EC} Total Product Needed = 12 acres × 0.75 gal/acre = 9.0 gallons of 4 EC

Tank Mix Loading & Coverage Calculations

When preparing to spray an entire field or turf property, applicators must determine how many acres a single full tank will cover, how much chemical to add per tankload, and how to mix partial loads for remaining slivers of land.

Step 1: Determine Acres Covered per Full Tank

Divide total usable spray tank capacity by the calibrated application rate in Gallons Per Acre: Acres Covered per Tank = Tank Capacity (Gallons) Calibrated Application Rate (GPA) \text{Acres Covered per Tank} = \frac{\text{Tank Capacity (Gallons)}}{\text{Calibrated Application Rate (GPA)}} Acres Covered per Tank = Calibrated Application Rate (GPA) Tank Capacity (Gallons) ​

Example : A boom sprayer has a 500-gallon tank and is calibrated to apply 20 GPA . Acres Covered per Tank = 500 gallons 20 GPA = 25 acres per tankload \text{Acres Covered per Tank} = \frac{500\text{ gallons}}{20\text{ GPA}} = 25\text{ acres per tankload} Acres Covered per Tank = 20 GPA 500 gallons ​ = 25 acres per tankload

Step 2: Determine Chemical Product per Tankload

Multiply acres covered per tank by the labeled application rate per acre: Product to Add per Tank = Acres per Tank × Label Rate per Acre \text{Product to Add per Tank} = \text{Acres per Tank} \times \text{Label Rate per Acre} Product to Add per Tank = Acres per Tank × Label Rate per Acre

Example : The label instructs applying 1.5 pints of herbicide per acre . Product per Tank = 25 acres × 1.5 pints/acre = 37.5 pints \text{Product per Tank} = 25\text{ acres} \times 1.5\text{ pints/acre} = 37.5\text{ pints} Product per Tank = 25 acres × 1.5 pints/acre = 37.5 pints Converting to gallons (8 pints per gallon): Gallons per Tank = 37.5 8 = 4.69 gallons of product \text{Gallons per Tank} = \frac{37.5}{8} = 4.69\text{ gallons of product} Gallons per Tank = 8 37.5 ​ = 4.69 gallons of product

Step 3: Partial Tank Calculations (Preventing Waste Disposal)

Applicators should never mix a full tank of pesticide when only a fraction of acreage remains. Mixing excess chemical creates illegal disposal hazards.

Scenario : An applicator completes several full tanks and has 6.5 acres remaining to spray. The sprayer is calibrated at 20 GPA , and the label rate is 2.0 pounds of 75 WP per acre .

Water Volume Needed : Water Needed = 6.5 acres × 20 GPA = 130 gallons of water \text{Water Needed} = 6.5\text{ acres} \times 20\text{ GPA} = 130\text{ gallons of water} Water Needed = 6.5 acres × 20 GPA = 130 gallons of water

Product Quantity Needed : Product Needed = 6.5 acres × 2.0 lb/acre = 13.0 pounds of 75 WP \text{Product Needed} = 6.5\text{ acres} \times 2.0\text{ lb/acre} = 13.0\text{ pounds of 75 WP} Product Needed = 6.5 acres × 2.0 lb/acre = 13.0 pounds of 75 WP

Mixing Procedure : Fill the spray tank with approximately 70 gallons of clean water, engage agitation, slowly add the 13.0 pounds of 75 WP, then add remaining water to reach the 130-gallon line.

Commercial Turf Calculations (Rate per 1,000 Sq Ft)

Turf and landscape pesticide labels specify rates per 1,000 square feet rather than per acre.

Example : A lawn care technician has a 200-gallon spray rig calibrated to apply 2.0 gallons per 1,000 sq ft . The label specifies 1.5 fluid ounces of herbicide per 1,000 sq ft .

Units of 1,000 sq ft per Tank : Tank Capacity in 1,000 sq ft units = 200 gallons 2.0 gal / 1,000 sq ft = 100 units (100,000 sq ft) \text{Tank Capacity in 1,000 sq ft units} = \frac{200\text{ gallons}}{2.0\text{ gal / 1,000 sq ft}} = 100\text{ units (100,000 sq ft)} Tank Capacity in 1,000 sq ft units = 2.0 gal / 1,000 sq ft 200 gallons ​ = 100 units (100,000 sq ft)

Product per Tank : Herbicide Needed = 100 units × 1.5 fl oz/unit = 150 fluid ounces \text{Herbicide Needed} = 100\text{ units} \times 1.5\text{ fl oz/unit} = 150\text{ fluid ounces} Herbicide Needed = 100 units × 1.5 fl oz/unit = 150 fluid ounces Converting to gallons (128 fl oz per gallon): Gallons Needed = 150 128 = 1.17 gallons (or 1 gallon + 22 fl oz) \text{Gallons Needed} = \frac{150}{128} = 1.17\text{ gallons (or 1 gallon + 22 fl oz)} Gallons Needed = 128 150 ​ = 1.17 gallons (or 1 gallon + 22 fl oz)

Geometric Land Area Calculations

Accurately measuring the surface area of target sites is mandatory. Miscalculating area leads directly to under- or over-application. +-------------------------------------------------------------------------+

  • | STANDARD GEOMETRIC AREA FORMULAS |
  • +-------------------------------------------------------------------------+
  • | RECTANGLE / SQUARE: |
  • | Area = Length x Width |
  • | |
  • | TRIANGLE: |
  • | Area = 0.5 x Base x Height |
  • | |
  • | CIRCLE: |
  • | Area = pi x r^2 (where pi = 3.1416, and r = radius) |
  • | |
  • | TRAPEZOID: |
  • | Area = 0.5 x (Base 1 + Base 2) x Height |
  • | |
  • | CONVERSION TO ACRES: |
  • | Acres = Square Feet / 43,560 |
  • +-------------------------------------------------------------------------+
  • Worked Scenarios for Applicators

Rectangular Field : A hay field measures 660 feet long by 330 feet wide. Area = 660 × 330 = 217 , 800 sq ft \text{Area} = 660 \times 330 = 217,800\text{ sq ft} Area = 660 × 330 = 217 , 800 sq ft Acres = 217 , 800 43 , 560 = 5.0 acres \text{Acres} = \frac{217,800}{43,560} = 5.0\text{ acres} Acres = 43 , 560 217 , 800 ​ = 5.0 acres

Triangular Field Corner : An irregular field corner has a base of 300 feet and a perpendicular height of 150 feet. Area = 0.5 × 300 × 150 = 22 , 500 sq ft \text{Area} = 0.5 \times 300 \times 150 = 22,500\text{ sq ft} Area = 0.5 × 300 × 150 = 22 , 500 sq ft Acres = 22 , 500 43 , 560 = 0.516 acres \text{Acres} = \frac{22,500}{43,560} = 0.516\text{ acres} Acres = 43 , 560 22 , 500 ​ = 0.516 acres

Circular Golf Green : A putting green has a diameter of 80 feet (radius r = 40 feet r = 40\text{ feet} r = 40 feet ). Area = π × r 2 = 3.1416 × 40 2 = 3.1416 × 1 , 600 = 5 , 026.5 sq ft \text{Area} = \pi \times r^2 = 3.1416 \times 40^2 = 3.1416 \times 1,600 = 5,026.5\text{ sq ft} Area = π × r 2 = 3.1416 × 4 0 2 = 3.1416 × 1 , 600 = 5 , 026.5 sq ft

Highway Right-of-Way Strip : An applicator is treating a roadside brush corridor that extends 4 miles in length with an average treated width of 15 feet.

Total length in feet: 4 miles × 5 , 280 ft/mile = 21 , 120 feet 4\text{ miles} \times 5,280\text{ ft/mile} = 21,120\text{ feet} 4 miles × 5 , 280 ft/mile = 21 , 120 feet .

Area in square feet: 21 , 120 × 15 = 316 , 800 sq ft 21,120 \times 15 = 316,800\text{ sq ft} 21 , 120 × 15 = 316 , 800 sq ft .

Total acreage: 316 , 800 / 43 , 560 = 7.27 acres 316,800 / 43,560 = 7.27\text{ acres} 316 , 800/43 , 560 = 7.27 acres .

Percentage Dilution Math for Spot and Hand-Wand Treatments

Backpack sprayers, hand-wand sprayers, greenhouse space sprayers, and woody brush spot treatments frequently specify chemical rates as a percentage concentration of spray solution (e.g., "Mix a 1.5% v/v solution of herbicide in water").

The Percentage Dilution Master Formula

To determine the fluid ounces of pesticide concentrate required: Fluid Ounces of Pesticide = Target Solution (Gallons) × 128 fl oz/gal × Percent Concentration (decimal) \text{Fluid Ounces of Pesticide} = \text{Target Solution (Gallons)} \times 128\text{ fl oz/gal} \times \text{Percent Concentration (decimal)} Fluid Ounces of Pesticide = Target Solution (Gallons) × 128 fl oz/gal × Percent Concentration (decimal)

Practical Step-by-Step Spot Mix Scenarios

Scenario 1 (Backpack Invasive Weed Treatment) :

An applicator needs to prepare a 3-gallon backpack sprayer with a 2% solution of triclopyr to spot-treat oriental bittersweet in a forest edge. Fl Oz of Pesticide = 3 gallons × 128 fl oz/gal × 0.02 \text{Fl Oz of Pesticide} = 3\text{ gallons} \times 128\text{ fl oz/gal} \times 0.02 Fl Oz of Pesticide = 3 gallons × 128 fl oz/gal × 0.02 Fl Oz of Pesticide = 384 × 0.02 = 7.68 fluid ounces \text{Fl Oz of Pesticide} = 384 \times 0.02 = 7.68\text{ fluid ounces} Fl Oz of Pesticide = 384 × 0.02 = 7.68 fluid ounces

Procedure : Add approximately 1.5 gallons of clean water to the backpack, measure and add 7.7 fluid ounces of triclopyr, agitate gently, then fill with clean water to the 3-gallon fill line.

Scenario 2 (High-Volume Hydraulic Spot Spray) :

A utility contractor is preparing a 100-gallon skid tank with a 1.5% solution of glyphosate for invasive knotweed along an electric transmission right-of-way. Gallons of Pesticide = 100 gallons × 0.015 = 1.5 gallons \text{Gallons of Pesticide} = 100\text{ gallons} \times 0.015 = 1.5\text{ gallons} Gallons of Pesticide = 100 gallons × 0.015 = 1.5 gallons

Converting to fluid ounces: 1.5 × 128 = 192 fluid ounces 1.5 \times 128 = 192\text{ fluid ounces} 1.5 × 128 = 192 fluid ounces . Procedure : Add 50 gallons of water to the tank, pour in 1.5 gallons of glyphosate concentrate, start mechanical agitation, and bring water level to exactly 100 gallons.

Scenario 3 (Dormant Fruit Tree Horticultural Oil) :

An apple grower is preparing 250 gallons of a 3% dormant oil spray to smother overwintering European red mite eggs. Gallons of Oil = 250 gallons × 0.03 = 7.5 gallons of horticultural oil \text{Gallons of Oil} = 250\text{ gallons} \times 0.03 = 7.5\text{ gallons of horticultural oil} Gallons of Oil = 250 gallons × 0.03 = 7.5 gallons of horticultural oil

The grower adds 7.5 gallons of oil to the tank under vigorous mechanical agitation with water to create a stable, uniform emulsion before spraying.

Loading diagram... Pesticide Tank Batching and Dilution Sequence