Study guide

11.1 CGL Limits of Insurance and Aggregates

New Hampshire Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: New Hampshire Property & Casualty Insurance Exam Overview

New Hampshire Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: New Hampshire P&C Insurance Regulation & Licensing

1.1 New Hampshire Insurance Department 1.2 New Hampshire P&C Producer Licensing Requirements 1.3 New Hampshire Producer Responsibilities

22 Chapter 2: New Hampshire Property Insurance

2.1 New Hampshire Homeowners Insurance 2.2 New Hampshire Commercial Property Insurance

23 Chapter 3: New Hampshire Auto & Casualty Insurance

3.1 New Hampshire Financial Responsibility Laws 3.2 New Hampshire Liability & Casualty Insurance

24 Chapter 4: New Hampshire Ethics & Professional Conduct

4.1 New Hampshire Ethical Standards for Producers 4.2 New Hampshire Consumer Protection Requirements

11.1 CGL Limits of Insurance and Aggregates

Key Takeaways Explain This Topic AI

ISO CGL form CG 00 01 carries six interlocking limits; the Each Occurrence limit caps a single loss while the General Aggregate caps total BI/PD, Coverage B, and Med Pay for the policy year.

The Products-Completed Operations Aggregate is a separate annual bucket so product/completed-work losses cannot drain the limits protecting premises and ongoing operations.

Standard CGL defense costs are paid outside (in addition to) the limits and do not erode the aggregate, unlike claims-made professional policies where defense is inside the limit.

Each paid occurrence reduces the relevant aggregate; once an aggregate is exhausted, later claims of that type go unpaid even when the per-occurrence limit is untouched.

Aggregates do not reinstate mid-term, and courts use the cause test (one continuous condition equals one occurrence) far more than the effect test; a CG 25 03 per-project aggregate gives each job its own limit.

Last updated: June 2026

How the CGL Stacks Its Limits

The Commercial General Liability (CGL) coverage form, published by the Insurance Services Office (ISO) as form CG 00 01 , does not use one single limit. Instead the Declarations show a tier of six interlocking limits in the Limits of Insurance section (Section III). Exam questions almost always test how a single occurrence draws down more than one of these limits at the same time.

Each Occurrence Limit - the most paid for the combined bodily injury (BI) and property damage (PD) arising from any one occurrence.

General Aggregate Limit - the most paid in the policy period for all BI/PD, medical payments, and personal and advertising injury, except losses falling under products-completed operations.

Products-Completed Operations Aggregate - a separate annual cap for injury arising away from your premises out of your product or completed work.

Personal and Advertising Injury Limit - a per-person/organization cap (libel, slander, wrongful eviction, etc.).

Damage to Premises Rented to You - a fire/sublimit, commonly $100,000.

Medical Payments - a small no-fault limit, commonly $5,000 per person.

Why Two Aggregates Exist

The products-completed operations aggregate is walled off so that a defective-product epidemic cannot exhaust the limits that protect ongoing premises and operations. A claim that erodes one aggregate generally does not erode the other.

A key exam rule: the Each Occurrence Limit is the ceiling for any single loss event, but every paid occurrence also reduces the relevant aggregate . Once an aggregate is gone, later claims of that type are not paid even if the per-occurrence limit looks untouched. Defense costs are normally paid in addition to the limits (outside the limits), so they do not erode the aggregate - a frequent trap versus claims-made professional policies where defense is inside the limit.

Worked Limit-Drawdown Example

Assume Declarations of: Each Occurrence $1,000,000; General Aggregate $2,000,000; Products-Completed Ops Aggregate $2,000,000.

  • Event BI/PD paid General Agg. remaining Products Agg. remaining
  • Slip-and-fall at store $1,000,000 $1,000,000 $2,000,000
  • Second premises fall $700,000 $300,000 $2,000,000
  • Defective product, off-site $900,000 $300,000 $1,100,000

Notice the off-site product claim drew only from the products aggregate , leaving the general aggregate at $300,000. If a third premises claim of $500,000 then occurred, the insurer pays only the remaining $300,000 general aggregate, even though the $1,000,000 per-occurrence limit was not reached. Memorize: per-occurrence caps a single loss; aggregate caps the year.

Six CGL Limits and How They Interact

The standard CGL declarations show six limits , and the exam expects fluency in how they nest. The General Aggregate caps total payments for most BI/PD, Coverage B, and medical payments in the policy year. The Products-Completed Operations Aggregate is a separate bucket for injury arising from the insured's products or completed work. Within those caps sit the Each Occurrence limit, the Personal & Advertising Injury limit (per person/organization), the Damage to Premises Rented to You limit, and the Medical Payments sublimit.

  • Limit Caps
  • General Aggregate All Coverage A (except prod/comp ops) + B + C for the year
  • Products-Completed Ops Aggregate Product/completed-work injuries for the year
  • Each Occurrence Combined BI + PD from any one occurrence
  • Personal & Advertising Injury Per person/organization (subject to gen. aggregate)
  • Damage to Premises Rented to You Fire/limited perils to rented premises (e.g., $100,000)
  • Medical Payments Per person (e.g., $5,000)

Worked example: A contractor with a $1M Each Occurrence / $2M General Aggregate / $2M Products-Completed Ops Aggregate has three liability losses in one year of $800,000, $700,000, and $900,000 from ongoing operations. The first two ($1.5M) are paid fully; the third is capped at the remaining $500,000 of the $2M general aggregate, leaving $400,000 unpaid — unless a CG 25 03 per-project aggregate had given each job its own limit. Completed-operations claims would draw on the separate products aggregate, illustrating why two aggregates exist.