Study guide

9.1 Commercial Package Policy Structure and Common Policy Conditions

New Hampshire Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: New Hampshire Property & Casualty Insurance Exam Overview

New Hampshire Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: New Hampshire P&C Insurance Regulation & Licensing

1.1 New Hampshire Insurance Department 1.2 New Hampshire P&C Producer Licensing Requirements 1.3 New Hampshire Producer Responsibilities

22 Chapter 2: New Hampshire Property Insurance

2.1 New Hampshire Homeowners Insurance 2.2 New Hampshire Commercial Property Insurance

23 Chapter 3: New Hampshire Auto & Casualty Insurance

3.1 New Hampshire Financial Responsibility Laws 3.2 New Hampshire Liability & Casualty Insurance

24 Chapter 4: New Hampshire Ethics & Professional Conduct

4.1 New Hampshire Ethical Standards for Producers 4.2 New Hampshire Consumer Protection Requirements

9.1 Commercial Package Policy Structure and Common Policy Conditions

Key Takeaways Explain This Topic AI

A CPP needs two or more coverage parts under one declarations page; one line alone is monoline.

Combining parts earns a package modification factor (roughly a 5-15% premium credit).

The first Named Insured alone may cancel, request changes, pay premium, and receive return premium.

Cancellation notice is 10 days for nonpayment and 30 days for any other reason.

The insurer may examine the insured's books during the term and up to 3 years after it ends.

Last updated: June 2026

What the Commercial Package Policy Does

A Commercial Package Policy (CPP) is a single contract that joins two or more coverage parts beneath one declarations page and one set of shared conditions. The Insurance Services Office (ISO) standardizes each part so a producer can attach commercial property, commercial general liability (CGL) , commercial crime, inland marine, commercial auto, equipment breakdown, or farm coverage to fit the account. A policy that carries only one of these lines is a monoline policy, not a package.

This line is tested relentlessly. A stem describing a shop that buys only a Building and Personal Property form is monoline. Add a CGL part and the same insured now owns a CPP, which usually earns a package modification factor (a 5 to 15 percent credit) because issuance is cheaper and the spread of risk improves.

How the Package Is Stacked

Every CPP is assembled from the same documents. Memorize what each piece does, because exams ask which component performs which job.

  • Component Function
  • Common Policy Declarations Names insured, policy period, premium, list of coverage parts
  • Common Policy Conditions Shared rules binding every part
  • Coverage Part Declarations Limits and forms for each line
  • Coverage Forms Insuring agreements (e.g., CP 00 10)
  • Causes of Loss Forms Perils covered
  • Endorsements Add, restrict, or amend coverage

The Common Policy Declarations is the only declarations that names the insured and the policy period for the whole contract; each coverage part then carries its own supplemental declarations listing limits and forms. Because one set of conditions and one declarations cover every line, the package reads as a single policy even though it might insure a building, a fleet of vehicles, and an employee-theft exposure at once.

A monoline policy uses the same building blocks but lists only one coverage part. The practical takeaway for the exam: any time you can attach a second standardized ISO part, the account converts from monoline to package and qualifies for the package discount. Equipment breakdown (boiler and machinery) and commercial crime are the parts most often added to a property-and-liability core.

The Seven ISO Coverage Parts

ISO recognizes a defined set of parts that can ride inside a CPP. Knowing the list lets you spot a stem that is describing a package versus a standalone policy.

  • Coverage part Insures
  • Commercial Property Buildings, business personal property, business income
  • Commercial General Liability Bodily injury, property damage, personal and advertising injury
  • Commercial Crime Employee theft, robbery, forgery, computer fraud
  • Commercial Inland Marine Mobile property, transit, contractors' equipment
  • Commercial Auto Owned, hired, and non-owned vehicles
  • Equipment Breakdown Boiler, machinery, electrical and mechanical breakdown
  • Farm Farm dwellings, barns, livestock, machinery

Any two or more of these under one declarations is a CPP. A common exam setup pairs Commercial Property with CGL — that combination is the most frequently sold package and the textbook example of a CPP.

The Six Common Policy Conditions

The Common Policy Conditions apply to all parts so they need not be repeated in each. Know all six and their numeric triggers.

Cancellation — The first Named Insured may cancel anytime. The insurer must give 10 days advance written notice for nonpayment and 30 days for any other reason.

Changes — Only the first Named Insured can request policy changes, and changes require the insurer's consent by endorsement.

Examination of Your Books and Records — The insurer may audit the insured's records during the policy term and up to 3 years after the period ends.

Inspections and Surveys — The insurer may inspect but is not obligated to, and inspection is not a safety warranty.

Premiums — The first Named Insured is responsible for paying premium and receives any return premium.

Transfer of Rights and Duties (assignment) — Rights cannot be transferred without the insurer's written consent, except to a deceased insured's legal representative.

Exam trap: the first Named Insured holds the special powers (cancel, change, pay, receive returns). Other named insureds do not.

Why the Numbers Matter

Notice that the commercial cancellation timeline differs from personal lines. In a CPP the insurer must give 30 days for ordinary cancellations and 10 days for nonpayment, but the first Named Insured can walk away at any time with no waiting period. Many states layer additional notice rules on top of these national minimums, which is why state law lives in separate chapters of this guide.

The three-year books-and-records window exists so insurers can perform premium audits on auditable lines (general liability and workers compensation are commonly audited). If a CGL policy was rated on estimated payroll or sales, the insurer reconciles the estimate against actual figures after expiration; the audit can produce an additional premium charge or a return. Remember the assignment rule too: the policy follows the insured, not the property, so selling the insured building does not automatically transfer coverage to the buyer.

Commercial Package Policy (CPP) Structure and Common Conditions

A Commercial Package Policy (CPP) is assembled from standardized building blocks so a single policy can cover many exposures at a multi-line discount. Every CPP contains three mandatory pieces — the Common Policy Declarations , the Common Policy Conditions , and the Interline Endorsements — plus two or more coverage parts (e.g., Commercial Property, CGL, Commercial Auto, Crime, Equipment Breakdown, Inland Marine).

  • CPP element Role
  • Common Policy Declarations Names, address, parts attached, premium
  • Common Policy Conditions Cancellation, changes, exam of books, inspections, transfer
  • Coverage parts (2+) Property, CGL, auto, crime, etc., each with its own dec/conditions
  • Interline endorsements Apply across more than one coverage part

The Common Policy Conditions are heavily tested: Cancellation (the first Named Insured may cancel anytime; the insurer must give advance written notice — commonly 10 days for nonpayment , 30 days otherwise), Changes (only the first Named Insured can request changes), Examination of Books and Records , Inspections and Surveys , Premium (first Named Insured is responsible), and Transfer of Rights/Duties (assignment needs insurer consent).

Worked scenario: A retailer's CPP combines Commercial Property and CGL. The insurer wants to cancel mid-term for underwriting reasons. Because cancellation is not for nonpayment, the insurer must give the first Named Insured 30 days written notice, and only the first Named Insured is recognized for premium and policy changes — even if a co-insured disagrees. Knowing which conditions are common (apply to the whole package) versus coverage-part-specific is the core exam skill, along with the requirement that a true package needs at least two coverage parts.