Study guide
16.1 Surety and Fidelity Bonds
New Hampshire Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: New Hampshire Property & Casualty Insurance Exam Overview
New Hampshire Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: New Hampshire P&C Insurance Regulation & Licensing
1.1 New Hampshire Insurance Department 1.2 New Hampshire P&C Producer Licensing Requirements 1.3 New Hampshire Producer Responsibilities
22 Chapter 2: New Hampshire Property Insurance
2.1 New Hampshire Homeowners Insurance 2.2 New Hampshire Commercial Property Insurance
23 Chapter 3: New Hampshire Auto & Casualty Insurance
3.1 New Hampshire Financial Responsibility Laws 3.2 New Hampshire Liability & Casualty Insurance
24 Chapter 4: New Hampshire Ethics & Professional Conduct
4.1 New Hampshire Ethical Standards for Producers 4.2 New Hampshire Consumer Protection Requirements
16.1 Surety and Fidelity Bonds
Key Takeaways Explain This Topic AI
A surety bond is a three-party agreement among principal, obligee, and surety; insurance is a two-party contract.
The surety expects no losses and pursues indemnity from the principal for any claim it pays.
Contract bonds (bid, performance, payment) and the Miller Act dominate the construction questions.
Fidelity bonds cover employee dishonesty and are first-party, loss-of-money coverage, unlike third-party surety obligations.
License, permit, judicial, and fiduciary bonds are common exam-tested commercial surety categories.
Last updated: June 2026
The Three-Party Structure
A surety bond is a written guarantee that one party will perform a specified obligation. Unlike an insurance policy, which is a two-party indemnity contract, a surety bond involves three distinct parties. Memorize the roles, because every exam question depends on them.
The principal is the party who must perform the obligation (for example, the contractor).
The obligee is the party protected by the bond and to whom the obligation is owed (for example, the project owner or a government agency).
The surety is the company that guarantees the principal's performance and pays the obligee if the principal defaults.
Guarantee, Not Indemnity
A crucial concept: the surety does not expect to suffer a loss. In ordinary insurance, the insurer prices premium to fund expected claims. In suretyship, the surety underwrites the principal much like a lender underwrites credit, expecting zero losses.
When the surety pays an obligee, it has a right of indemnity against the principal and pursues full reimbursement. The principal signs a general indemnity agreement before the bond is issued. So the principal is ultimately liable for any amount the surety pays out, plus costs.
Surety vs. Fidelity Bonds
- Feature Surety Bond Fidelity Bond
- Parties Three (principal, obligee, surety) Two (employer/insured and insurer)
- Guarantees Performance of an obligation Honesty of employees
- Loss covered Principal's failure to perform Employee dishonesty/theft
Right of reimbursement Surety can recover from principal No subrogation against the dishonest employee in the same way
Example Contract performance bond, license/permit bond, court bond Employee theft (ISO Form A), ERISA bond
Contract (Construction) Bonds
The most heavily tested surety category is the contract bond , used on construction projects. There are three closely related types you must distinguish:
A bid bond guarantees that a contractor who wins a bid will actually enter the contract and furnish the required performance bond. If the low bidder walks away, the surety pays the difference up to the bond penalty.
A performance bond guarantees the contractor will complete the work according to the contract terms and specifications.
A payment bond (labor and material bond) guarantees that subcontractors and material suppliers will be paid.
The Miller Act and Penal Sum
On federal construction contracts above a statutory threshold, the Miller Act requires both performance and payment bonds. Many states have a parallel "Little Miller Act" for public works.
The maximum amount a surety will pay is the penal sum (bond penalty). Worked example: a contractor wins a $2,000,000 project and posts a performance bond with a penal sum equal to 100% of the contract. The contractor defaults when the project is 60% complete. If completing the remaining work costs the obligee $950,000, the surety pays up to the $2,000,000 penal sum, here the full $950,000 completion cost.
Construction Bonds, Penal Sum, and Exam Traps
Construction (contract) surety divides into three bonds that the exam tests as a set. A bid bond guarantees the contractor will honor its bid and post the required performance bond if awarded. A performance bond guarantees the project will be completed per contract. A payment bond guarantees subcontractors and suppliers are paid. The Miller Act requires performance and payment bonds on federal construction contracts above a statutory threshold.
- Bond What it guarantees Beneficiary
- Bid bond Contractor will sign and bond the contract Project owner (obligee)
- Performance bond Completion of the work Project owner
- Payment bond Subs and suppliers get paid Subcontractors/suppliers
- License/permit bond Compliance with laws/ordinances Government / public
The penal sum is the maximum the surety will pay; it is not a premium and not an annual aggregate but the ceiling of the guarantee. Because surety is a guarantee, not insurance against the principal's own loss , the surety has a right of reimbursement (indemnity) against the principal after paying the obligee — the opposite of how fidelity coverage treats a dishonest employee.
Worked scenario: A contractor with a $2,000,000 performance bond abandons a job 70% complete. The surety pays to complete the work, spending $650,000, then pursues the contractor and its indemnitors for that amount. If completion had cost $2,300,000, the surety's payment would be capped at the $2,000,000 penal sum , leaving the owner to absorb the excess.