Study guide

Aseptic Technique, Sterile Technique & Equipment Disinfection

NHA CPCT/A Certified Patient Care Technician/Assistant

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CPCT/A Exam Overview

CPCT/A Exam Overview: Facts, Format, and the Five Domains The Patient Care Technician Role, Scope of Practice & How to Use This Guide

2 Patient Care Foundations & Assessment

Body Systems & Common Disease Processes Therapeutic Communication, Emotional Support & Cultural Competence Vital Signs, Weights & Critical Value Reporting Basic Hygiene: Bathing, Oral, Perineal & Foley Catheter Care Bed-Making, Patient Beds & Basic Body Positions Observing & Reporting Changes: Condition, Edema, Pain, Wound & Specimen Signs Patient Rounding, Prioritization & the Five Rights of Delegation

3 Mobility, Clinical Procedures & Emergency Care

Body Mechanics, Range of Motion & Ambulation Patient Transfers & Transport Skin Integrity, Pressure-Injury Prevention, Splints & Compression Devices Elimination, Ostomy Care & Intake/Output Oxygen, Suction & Respiratory Care Feeding Tubes, Aspiration Precautions & Adaptive ADL Devices IV Removal, Sterile Dressing Changes, Wound Care, First Aid & CPR End-of-Life Care, Grief & Postmortem Care

4 Compliance, Safety & Professional Responsibility

Scope of Practice, Chain of Command & Operational Standards Abuse & Neglect: Recognition, Mandated Reporting & Medical Ethics HIPAA, PHI, Electronic Health Records & Medical Terminology Patient Identification & Joint Commission Safety Goals OSHA Workplace Safety, Safety Data Sheets & Incident Reporting Emergency & Disaster Preparedness, Equipment Safety & Restraints

5 Infection Control

Chain of Infection, Standard & Transmission-Based Precautions & PPE Aseptic Technique, Sterile Technique & Equipment Disinfection Biohazard Disposal & Exposure Control Plans

6 Phlebotomy

Vascular Anatomy, Equipment, Site Selection, Patient ID, Requisitions & Consent Order of Draw, Tubes & Additives Venipuncture & Capillary Puncture Technique Blood Cultures, Nonblood Specimens, CLIA-Waived QC & Equipment Verification Complications, Adverse Reactions, Preanalytical Errors, Handling/Labeling/Transport & Chain of Custody

7 EKG (Electrocardiography)

Cardiac Anatomy, Conduction System & EKG Machine Basics Patient Preparation & Lead Placement Waveforms, Artifacts, Dysrhythmias & Life-Threatening Arrhythmias

Aseptic Technique, Sterile Technique & Equipment Disinfection

Key Takeaways Explain This Topic AI

Medical asepsis (clean technique) reduces the number of microorganisms present, while surgical asepsis (sterile technique) eliminates all microorganisms, including spores.

On a sterile field, the outer 1-inch border is considered contaminated, and anything below waist level or out of direct sight is also considered contaminated.

Cleaning removes visible soil with soap and water, disinfection kills most pathogens but not necessarily spores, and sterilization destroys all microorganisms including spores.

A disinfectant must remain in contact with a surface for the full contact (dwell) time listed on the manufacturer's label to be effective — wiping it dry early does not disinfect.

A 1:10 bleach dilution is commonly used against C. difficile spores and other resistant organisms, with contact times that can run up to 10 minutes per the product label.

Last updated: July 2026

Medical Asepsis vs. Surgical Asepsis

Infection-control technique operates at two distinct levels, and the exam expects a CPCT/A to know exactly which one a given task requires.

Medical asepsis ("clean technique") reduces the number and spread of microorganisms — it does not eliminate them. Handwashing, wearing clean (non-sterile) gloves for routine care, and standard cleaning of patient-care surfaces are all medical asepsis. It is used for most everyday patient-care tasks: bathing, feeding, taking vital signs, and changing linens.

Surgical asepsis ("sterile technique") eliminates all microorganisms, including bacterial spores, from an object or area. It is required for any invasive procedure that breaches the skin or enters a normally sterile body cavity — inserting a urinary catheter, performing a sterile dressing change, or assisting with a minor procedure.

  • Feature Medical asepsis Surgical asepsis
  • Goal Reduce microorganism numbers Eliminate all microorganisms, including spores

Typical tasks Handwashing, bathing, routine dressing removal, clean gloves Catheter insertion, sterile dressing change, invasive procedures

  • Equipment Clean supplies Sterile, individually packaged supplies
  • The Sterile Field: Core Rules

Once a sterile field is opened, it must be actively protected from contamination for the entire procedure. Key rules:

The outer 1-inch border of a sterile drape is considered contaminated the moment it is opened — nothing sterile may be placed within that border.

Never turn your back on a sterile field , and never leave it unattended; a field that goes unmonitored, even briefly, is considered contaminated.

Anything below waist level or out of direct line of sight is contaminated, even if it was sterile a moment earlier.

Sterile touches sterile only — a sterile-gloved hand or sterile instrument that contacts anything non-sterile (skin, an unsterile surface, the outside of a wrapper) is immediately contaminated and must be replaced.

Reaching over a sterile field with a non-sterile arm or object contaminates the field, even without direct contact, because of airborne particles and gravity.

A sterile field that becomes wet from spilled or splashed liquid (strike-through) is considered contaminated.

Sterile packages are opened facing away from the body and set down so the inner sterile surface faces up; the outside of any wrapper is always treated as non-sterile.

Talking, coughing, or sneezing directly over an open sterile field can contaminate it with respiratory droplets, which is one reason a mask is worn for many sterile procedures.

Levels of Decontamination

Three progressively stronger levels of decontamination are tested, and confusing them is a common exam trap:

Level What it does Kills spores? Example

Cleaning Physically removes visible soil, organic matter, and debris using soap/detergent and water or friction No Wiping down a bedside table before disinfecting

Disinfection Kills most pathogenic microorganisms on a surface using an EPA-registered chemical disinfectant Not necessarily (depends on the product) Wiping an exam table with an EPA-registered disinfectant wipe

Sterilization Destroys all microorganisms, including bacterial spores Yes Autoclaving (steam under pressure) or ethylene oxide gas for reusable surgical instruments

Items that will be sterilized are typically wrapped or pouched and run through the process with a chemical or biological indicator so staff can confirm sterility was actually achieved before the item is used on a patient. Cleaning must always occur before disinfection or sterilization — visible organic matter (blood, tissue, dried body fluid) blocks a disinfectant or sterilant from reaching the microorganisms underneath it.

Disinfectant Contact and Dry Times

A disinfectant only works if it stays wet on the surface for the full contact (dwell) time printed on the manufacturer's label — wiping a surface dry before that time elapses does not achieve the labeled level of disinfection, no matter how thoroughly the surface was wiped.

Bleach (sodium hypochlorite) : A 1:10 dilution (1 part household bleach to 9 parts water, mixed fresh) is commonly used against C. difficile spores and other resistant organisms. Contact time varies by product and soil level and can run up to 10 minutes ; always follow the manufacturer's stated contact time rather than an assumed one.

Alcohol (70–90% isopropyl or ethyl) : An intermediate-level disinfectant that evaporates quickly, so the surface must be kept visibly wet for the label's stated time; alcohol is not sporicidal and will not reliably kill C. difficile spores.

Quaternary ammonium compounds ("quats") : Common low-to-intermediate-level environmental surface disinfectants; effective against many bacteria and enveloped viruses but require a label-specified wet-contact time (often several minutes) and are generally not sporicidal.

Because product formulations and contact times vary by manufacturer, the CPCT/A's rule is constant: read and follow the product label for dilution, contact time, and any required rinse step, and never substitute a faster-drying product when a longer sporicidal contact time is required, such as for C. diff or norovirus.

Using the wrong level of technique in either direction causes real problems: applying only medical asepsis to an invasive procedure introduces pathogens directly into a sterile body site, while treating every routine task as if it required surgical asepsis wastes sterile supplies and time without adding any real protection. Matching the level of technique to the task — clean for routine care, sterile for invasive procedures, and the correctly timed disinfectant level for the surface or equipment involved — is the underlying skill this section tests.