Study guide
Order of Draw, Tubes & Additives
NHA CPCT/A Certified Patient Care Technician/Assistant
Track your progress as you read
Finished sections get a check mark.
1 Introduction & CPCT/A Exam Overview
CPCT/A Exam Overview: Facts, Format, and the Five Domains The Patient Care Technician Role, Scope of Practice & How to Use This Guide
2 Patient Care Foundations & Assessment
Body Systems & Common Disease Processes Therapeutic Communication, Emotional Support & Cultural Competence Vital Signs, Weights & Critical Value Reporting Basic Hygiene: Bathing, Oral, Perineal & Foley Catheter Care Bed-Making, Patient Beds & Basic Body Positions Observing & Reporting Changes: Condition, Edema, Pain, Wound & Specimen Signs Patient Rounding, Prioritization & the Five Rights of Delegation
3 Mobility, Clinical Procedures & Emergency Care
Body Mechanics, Range of Motion & Ambulation Patient Transfers & Transport Skin Integrity, Pressure-Injury Prevention, Splints & Compression Devices Elimination, Ostomy Care & Intake/Output Oxygen, Suction & Respiratory Care Feeding Tubes, Aspiration Precautions & Adaptive ADL Devices IV Removal, Sterile Dressing Changes, Wound Care, First Aid & CPR End-of-Life Care, Grief & Postmortem Care
4 Compliance, Safety & Professional Responsibility
Scope of Practice, Chain of Command & Operational Standards Abuse & Neglect: Recognition, Mandated Reporting & Medical Ethics HIPAA, PHI, Electronic Health Records & Medical Terminology Patient Identification & Joint Commission Safety Goals OSHA Workplace Safety, Safety Data Sheets & Incident Reporting Emergency & Disaster Preparedness, Equipment Safety & Restraints
5 Infection Control
Chain of Infection, Standard & Transmission-Based Precautions & PPE Aseptic Technique, Sterile Technique & Equipment Disinfection Biohazard Disposal & Exposure Control Plans
6 Phlebotomy
Vascular Anatomy, Equipment, Site Selection, Patient ID, Requisitions & Consent Order of Draw, Tubes & Additives Venipuncture & Capillary Puncture Technique Blood Cultures, Nonblood Specimens, CLIA-Waived QC & Equipment Verification Complications, Adverse Reactions, Preanalytical Errors, Handling/Labeling/Transport & Chain of Custody
7 EKG (Electrocardiography)
Cardiac Anatomy, Conduction System & EKG Machine Basics Patient Preparation & Lead Placement Waveforms, Artifacts, Dysrhythmias & Life-Threatening Arrhythmias
Order of Draw, Tubes & Additives
Key Takeaways Explain This Topic AI
The CLSI order of draw is blood culture (yellow), light blue citrate, red/gold SST, green heparin, lavender/pink EDTA, then gray fluoride.
Blood cultures are drawn first to protect specimen sterility, and gray fluoride tubes are drawn last because fluoride is the most disruptive additive.
Light blue citrate tubes require 3-4 inversions and an exact blood-to-additive ratio for valid coagulation testing.
Heparin, EDTA, and fluoride tubes each require 8-10 gentle inversions to fully anticoagulate or preserve the sample.
Capillary order of draw places the EDTA lavender tube first, before platelets clump at the puncture site.
Last updated: July 2026
Why Order of Draw Matters
Every time a multi-sample needle or transfer device punctures a tube's rubber stopper, a microscopic amount of that tube's additive can cling to the needle and be carried into the next tube — a phenomenon called additive carryover . Because these additives (anticoagulants, clot activators, preservatives) can chemically interfere with the tests performed on other tubes, CLSI defines a strict draw sequence that moves from the specimen most vulnerable to contamination (sterile blood cultures) toward the tube most likely to contaminate others (the glycolytic inhibitor tube). Following this sequence protects test accuracy and is one of the most heavily tested facts on the CPCT/A exam.
The CLSI Order of Draw
Order Tube Color Additive Purpose Inversions
1 Yellow (SPS) Sodium polyanethol sulfonate Blood cultures — sterility protected first Gently mixed, not shaken
- 2 Light blue Sodium citrate Coagulation studies (PT/PTT) 3-4
- 3 Red / Gold (SST, serum separator) Clot activator / separator gel Serum chemistry, serology 5
- 4 Green Lithium or sodium heparin Plasma chemistry, STAT chemistry 8-10
- 5 Lavender / Pink EDTA Hematology (CBC), blood bank 8-10
- 6 Gray Sodium fluoride / potassium oxalate Glucose, lactate (glycolysis inhibitor) 8-10
Blood cultures always go first to protect the sterile collection from contamination introduced by other punctures. Light blue citrate tubes always go second , before any tube containing a clot activator, because even a trace of clot activator carried into a citrate tube would corrupt coagulation results. Gray fluoride/oxalate tubes always go last because sodium fluoride is the most disruptive additive if carried into another tube — it inhibits enzymes needed for many chemistry and hematology tests.
Mixing by Inversion
Tubes with additives must be gently inverted the specified number of times immediately after filling, never shaken, which can cause hemolysis. A plain red-top serum tube with no additive is not inverted at all. Citrate (light blue) tubes are inverted 3-4 times because the sodium citrate must dissolve completely and mix at an exact citrate-to-blood ratio for valid coagulation results — an underfilled citrate tube invalidates the test. SST/gold tubes are inverted 5 times to activate clotting evenly. Heparin (green), EDTA (lavender/pink), and fluoride (gray) tubes each receive 8-10 inversions to fully anticoagulate or preserve the sample.
Capillary (Dermal) Order of Draw
Capillary specimens follow a different sequence than venous draws because capillary blood clots faster and platelets clump quickly at a skin puncture site:
EDTA (lavender) — always first , for hematology testing such as a CBC, before platelets begin to aggregate at the puncture site.
Other additive tubes, such as heparin, or chemistry testing.
Serum or clot-activator tubes, or tests requiring serum.
Blood gas specimens, when collected by capillary technique, are typically collected earliest in the sequence due to their time sensitivity, per site protocol.
Applying the Sequence
A CPCT/A candidate asked to collect a coagulation panel, a CBC, and a basic metabolic panel from the same patient must draw in this order: light blue citrate first, then lavender EDTA, then gray fluoride — not the order the tests happen to appear on the requisition. If a blood culture is also ordered, it is collected before all of these. Reversing this order, for example drawing an EDTA tube before a citrate tube, can falsely prolong or shorten clotting times because trace EDTA carried into the citrate tube chelates calcium needed for the coagulation reaction, corrupting PT/PTT results.
Winged Sets and Coagulation Draws
When a winged, or butterfly, collection set is used and a coagulation tube is the very first tube to be filled, the air in the flexible tubing can pull extra vacuum from the citrate tube and cause it to underfill. To prevent this, CLSI guidance calls for filling a discard tube first — a non-additive tube, or another citrate tube used only to prime the tubing — before filling the actual coagulation specimen. This discard step is not needed when the coagulation tube is not the first tube drawn in the sequence.
A Memory Aid
Many CPCT/A candidates use a short mnemonic to recall the sequence: Stop (yellow blood culture), Light (light blue citrate), Red (red/gold SST), Green (green heparin), Light-purple (lavender EDTA), Gray (gray fluoride). A mnemonic is only useful, however, if the candidate also understands why each tube is positioned where it is, since exam questions frequently test the underlying carryover rationale rather than the sequence alone.
Additive Function Quick Reference
Sodium citrate (light blue) — binds calcium to prevent clotting for coagulation testing; requires an exact blood-to-additive ratio.
Clot activator (red/gold) — encourages clotting so serum can be separated; SST tubes add a gel that forms a physical barrier between serum and cells during centrifugation.
Heparin (green) — inactivates thrombin and thromboplastin, yielding plasma without interfering with many chemistry assays; commonly used for STAT electrolyte panels.
EDTA (lavender/pink) — chelates calcium to prevent clotting while preserving cell morphology, making it ideal for CBCs and blood typing.
Sodium fluoride/potassium oxalate (gray) — fluoride inhibits glycolysis, blocking red cells from consuming glucose in the tube, while oxalate prevents clotting, keeping glucose and lactate levels stable until testing.
Mastering this table — colors, additives, purposes, sequence, and inversion counts — is foundational not only for the exam but for preventing real specimen-integrity errors on the job.