Study guide
4.1 Equipment & Tube Selection
NHA Certified Phlebotomy Technician CPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & NHA CPT Exam Overview
1.1 NHA CPT Exam Facts 1.2 Eligibility & Application 1.3 Test Plan & Study Strategy
2 Safety & Compliance
2.1 Infection Control & Standard Precautions 2.2 Safety & Hazard Management 2.3 Regulatory Compliance & Quality
3 Patient Preparation
3.1 Patient Identification & Communication 3.2 Pre-Analytical Variables 3.3 Vascular Anatomy & Site Selection
4 Routine Blood Collections
4.1 Equipment & Tube Selection 4.2 Venipuncture Technique 4.3 Capillary Collection & Complications
5 Special Collections & Processing
5.1 Special Collections I 5.2 Special Collections II & Special Populations 5.3 Specimen Processing & Handling
6 Final Review & Test-Day Strategy
6.1 High-Yield Recap 6.2 Order-of-Draw & Scenario Drills 6.3 Test-Day Strategy & Pitfalls
4.1 Equipment & Tube Selection
Key Takeaways Explain This Topic AI
Needle gauge is inversely related to bore: a 21-gauge needle is the routine venipuncture standard, while a higher number (23-gauge butterfly) has a smaller bore for fragile or small veins
The CLSI PRE02 order of draw is: sterile/blood culture, light blue (sodium citrate), red or gold SST (serum/clot activator), green (heparin), lavender (EDTA), then gray (glycolytic inhibitor)
Light blue citrate tubes require a strict 9:1 blood-to-additive ratio; underfilling invalidates coagulation results such as PT/INR and aPTT
EDTA (lavender), heparin (green), and gray tubes need 8-10 gentle inversions; SST needs 5; light blue needs 3-4; plain (glass) red needs 0, while plastic red tubes with clot activator need 5
Carrying citrate before serum and heparin prevents additive carryover that would falsely alter chemistry, coagulation, and hematology results
Last updated: October 2026
Why Equipment and Order of Draw Dominate This Domain
Routine Blood Collections is the single largest NHA Certified Phlebotomy Technician (CPT) domain at 28% of scored items (28 of 100). More questions here test tube selection, additive chemistry, and the order of draw than any other concept on the exam. A candidate who can recite the order of draw and match every tube color to its additive and tests has already secured a large share of a passing score.
The governing standard is CLSI PRE02 (Clinical and Laboratory Standards Institute, 8th edition, February 2025; it replaced GP41 without changing the order of draw), the consensus document that defines venipuncture procedure and the order of draw in the United States. NHA items follow this standard, so memorize it exactly as written.
Needles and Gauge
A needle gauge is the diameter of the needle bore. The relationship is inverse : the higher the gauge number, the smaller the bore. This is the single most common equipment trap on the exam.
- Gauge Bore Typical Use
- 16-18 G Largest Blood donor units and therapeutic phlebotomy
- 21 G Standard Routine adult venipuncture (the default answer)
- 22 G Smaller Smaller or fragile veins, syringe draws
- 23 G Small Winged (butterfly) set for hand veins, pediatric, difficult draws
- 25 G Smallest Rarely used for venipuncture; risks hemolysis
A needle that is too small (high gauge) forces blood through a narrow bore and can rupture red cells, causing hemolysis . The standard routine choice is a 21-gauge multisample needle.
Three Collection Systems
Three systems can be used to draw venous blood. The exam expects you to know when each is preferred.
Evacuated Tube System (ETS)
The evacuated tube system (ETS) is the routine method. A double-ended multisample needle screws into a tube holder; tubes contain a premeasured vacuum that pulls blood automatically and stops at the correct fill volume. ETS is closed (lower exposure risk) and supports drawing multiple tubes in sequence. It is the default for a routine antecubital draw.
Syringe
A syringe uses manual barrel aspiration and is chosen for fragile, small, or rolling veins where a strong vacuum would collapse the vein. Blood is transferred to tubes afterward using a safety transfer device — never by pushing through the needle, which causes hemolysis and a needlestick risk. When filling tubes from a syringe, you still respect the order of draw.
Winged Infusion (Butterfly) Set
A winged collection set (butterfly) is a short needle with flexible tubing, used for hand, wrist, or small antecubital veins and for many pediatric draws. A 23-gauge butterfly is typical. Key trap: when a light blue (citrate) tube is the first or only tube, draw and discard a clear (non-additive) tube first to prime the air out of the tubing, otherwise the citrate tube underfills and the 9:1 ratio is wrong.
Tube Additives, Colors, and the Tests They Serve
Each stopper color signals a specific additive. The additive determines whether you get serum (no anticoagulant, blood clots first) or plasma/whole blood (anticoagulated). Matching additive to test is heavily tested.
- Stopper Additive Mechanism Common Tests
- Blood culture SPS broth bottles Sterile, anticomplementary Sepsis / blood cultures
- Light blue 3.2% sodium citrate Reversibly binds (chelates) calcium PT/INR, aPTT, coagulation
Red (plain) None in glass tubes; plastic red tubes contain a clot activator Clots naturally (glass) or with the clot activator (plastic) Serology, chemistry, blood bank
- Gold / SST Clot activator + separator gel Speeds clotting, gel barrier on spin Most serum chemistry
- Green Heparin (lithium/sodium) Inhibits thrombin STAT chemistry, ammonia
- Light green (PST) Lithium heparin + gel Plasma + gel barrier STAT plasma chemistry
- Lavender EDTA Irreversibly chelates calcium CBC, ESR, hematology
- Pink EDTA Irreversibly chelates calcium Blood bank / crossmatch
Gray Sodium fluoride + potassium oxalate Fluoride inhibits glycolysis; oxalate anticoagulates Glucose, lactate, BAC
Mechanism rationale you must know:
EDTA and citrate both chelate calcium , but EDTA binds it irreversibly (good for cell preservation in a CBC), while citrate binds it reversibly in a fixed ratio (required for coagulation testing).
Heparin does not bind calcium; it accelerates antithrombin to block thrombin, so it is fast and ideal for STAT chemistry but unsuitable for a CBC blood film.
Sodium fluoride preserves glucose by stopping glycolysis (red cells consuming glucose), preventing a falsely low result.
Citrate fill rule: light blue tubes need a 9:1 blood-to-citrate ratio . An underfilled (short-draw) citrate tube has excess citrate, prolonging clotting times and causing rejection.
CLSI Order of Draw and Why It Exists
The order of draw prevents additive carryover — additive transferred on the needle from one tube into the next, which falsifies results. Always draw in this CLSI PRE02 sequence:
Blood culture / sterile (yellow SPS bottles) — drawn first to protect sterility before the skin or equipment can contaminate it.
Light blue (sodium citrate) — coagulation tube placed early so it is not contaminated by clot activator or other anticoagulants.
Red / gold SST (serum, clot activator, gel) — serum tubes; clot activator carryover here would not harm later tubes the way it would harm coagulation.
Green (heparin) — heparin carryover into EDTA or citrate would interfere, so heparin follows serum.
Lavender / pink (EDTA) — EDTA carried into a chemistry tube falsely lowers calcium and falsely raises potassium, so EDTA comes after chemistry tubes.
Gray (fluoride/oxalate) — drawn last because its potent additives cause the worst contamination if carried backward.
Mnemonic to anchor it: Cultures, Light blue, Red, Green, Lavender, Gray ('Stop Light Red Stay Put, Light Green Goes'). The most exam-critical errors are EDTA contaminating a potassium result and citrate or heparin contaminating coagulation.
Inversions: Mix Without Clotting
After filling, tubes with additive are gently inverted (a full 180-degree turn and back is one inversion) to mix the additive. Never shake — shaking causes hemolysis. Plain (glass) red has no additive and needs none; plastic red tubes contain a clot activator and need 5.
- Tube Inversions Reason
- Plain red (no gel) 0 No additive to mix
- Light blue (citrate) 3-4 Mix anticoagulant, avoid clot
- Gold / SST 5 Activate clotting + mix gel
- Green (heparin) 8-10 Fully distribute heparin
- Lavender (EDTA) 8-10 Prevent microclots in CBC
- Gray (fluoride) 8-10 Distribute glycolytic inhibitor
Inadequate EDTA mixing causes clotted CBC specimens , an absolute rejection that requires recollection.