Study guide

3.3 The Inspection Report

NHIE Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NHIE Orientation and Exam Strategy

1.1 Current NHIE Exam Facts 1.2 Eligibility, Application, and Scheduling 1.3 Blueprint Domains and Weighting 1.4 Question Style and Score Report Thinking 1.5 Study Calendar and Practice Plan

2 Chapter 2: Building Systems and Site Inspection

2.1 Site, Grounds & Exterior 2.2 Roofing & Structure 2.3 Electrical Systems 2.4 HVAC & Plumbing 2.5 Interior, Insulation & Ventilation

3 Chapter 3: Analysis of Findings and Reporting

3.1 Defect Recognition & Materiality 3.2 Building Science & Common Failure Patterns 3.3 The Inspection Report 3.4 The Standards of Practice (Scope) 3.5 Communicating Findings to Clients

4 Chapter 4: Professional Responsibilities, Ethics & Business

4.1 Code of Ethics & Conflicts of Interest 4.2 Legal Liability & Negligence 4.3 Pre-Inspection Agreements & Contracts 4.4 Licensing & Business Practices 4.5 Inspector Safety & Professional Conduct

5 Chapter 5: Final Review and Test Day

5.1 Timed Practice Strategy 5.2 Last-Week Review Map 5.3 Exam-Day Checklist 5.4 After the Exam and Next Steps

3.3 The Inspection Report

Key Takeaways Explain This Topic AI

A written report is the inspection's deliverable; under the Standards it must describe the systems inspected, the inspector's findings, and any material defects discovered.

Descriptive reporting states what a component IS (e.g., 'asphalt-shingle roof'); functional reporting states whether it WORKS and what is wrong — the report needs both.

The summary page collects the significant findings so the major issues are not lost in the body of the report.

Each finding should carry a clear recommendation: repair, replace, monitor, or further evaluation by a qualified specialist.

Inspectors should avoid code citations, repair cost estimates, valuations, and opinions on whether to buy — these are outside scope and create liability.

Last updated: June 2026

The Report Is the Product

The client never sees the inspector's eyes — they see the report. Under the Standards of Practice, the inspector must deliver a written report that describes the systems and components inspected, states the inspector's findings, and identifies any material defects discovered. Everything in Chapters covering systems and analysis funnels into this single document, and the NHIE tests whether you understand its required content and limits.

A complete report is more than a list of broken things. Typical elements include: the report cover and client/property identification; the scope and date; a system-by-system narrative (roof, exterior, structure, electrical, plumbing, HVAC, interior, insulation/ventilation); photographs documenting conditions; clearly worded findings ; and a summary of the significant items.

Many state-adopted and association formats also require the inspector to describe certain components (for example, the type of roof covering, the service-panel amperage, the heating fuel) even when no defect is present, so the reader knows what was examined.

Descriptive vs. Functional Reporting

Two modes of reporting work together. Descriptive reporting records what a component is : "3-tab asphalt shingle roof," "copper water-supply distribution," "100-amp circuit-breaker panel." It documents that the item exists and was inspected. Functional reporting records how it performs and what is wrong : "the roof covering shows widespread granule loss and three areas of exposed underlayment" or "the panel has a double-tapped breaker." A report that only describes leaves the client guessing about condition; a report that only flags defects leaves no baseline. Good reports do both.

Clarity of language is itself a skill the exam values. Findings should be written in plain narrative the reader can act on — short sentences, specific locations ("the northwest corner of the basement"), and the recommended action. The professional habit is to describe the condition factually rather than use loaded, emotional words: write "the panel is older and should be upgraded to current safety standards," not "this panel is dangerous and a disaster."

The Summary Page

Because a full report can run dozens of pages, the summary page exists so that the significant findings — material defects and safety items — are gathered in one place and not buried. The summary is not a substitute for the body; the Standards expect the detailed findings to remain in the system narratives, with the summary pointing to them. A well-built summary lets a buyer, agent, and attorney see the major issues at a glance while still requiring them to read the full report for context.

Recommendations and What to Leave Out

Every significant finding should end in a recommendation so the report is actionable rather than merely descriptive. The profession uses four standard recommendation types:

  • Recommendation When to use it Example
  • Repair Component is damaged but fixable Re-seal failed flashing at chimney
  • Replace Component is broken or worn out Water heater not producing hot water
  • Monitor Minor/uncertain condition to watch Hairline foundation crack, no movement
  • Further evaluation Beyond a generalist's scope Recommend a licensed electrician/structural engineer

Further evaluation by a qualified specialist is the correct call whenever a condition exceeds the general inspector's scope or certainty — a possible cracked heat exchanger, suspected structural movement, a possible underground oil tank. Recommending a specialist is a mark of thoroughness, not a cop-out.

Equally important is what not to put in a report. Inspectors generally should avoid: code citations (a home inspection is not a code-compliance inspection); repair cost estimates and dollar valuations (outside scope, invites disputes); opinions on whether the client should buy ; identifying hazardous materials by testing (mold, asbestos, radon require specialty testing); and inflammatory, subjective, or speculative language. Reporting cosmetic preferences as defects, guessing at causes you did not observe, and predicting future failure dates are also classic over-reaches.

The disciplined report states the observed condition, classifies it, recommends a proportionate action, and stops there.

The Role of Photographs

Photos are no longer optional in a professional report. A clear, captioned image of a cracked heat exchanger, a double-tapped breaker, or a stained ceiling does three things: it documents the condition objectively, it helps a non-technical reader understand what the words describe, and it protects the inspector by recording exactly what was observed on the day. Good practice is to photograph each material defect with enough context to show its location, add a caption tying it to the written finding, and avoid implying a condition the photo does not actually show.

Photos should support the narrative, never replace the written finding — an image without a written, classified finding and recommendation leaves the report ambiguous.

Anatomy of a Finding

The strongest reports write each significant finding in a consistent, four-part structure: location (where it is), observation (what was seen, factually), implication (why it matters — the value/safety/habitability consequence), and recommendation (repair, replace, monitor, or further evaluation). * This pattern keeps the inspector factual, ties every defect to a consequence, and ends in an action — the discipline that turns raw observation into a report a client can act on and an attorney cannot pick apart.

Consistency also helps the reader. When every finding follows the same shape and the summary uses the same severity vocabulary as the body, the client can scan, prioritize, and act without translating the inspector's idiosyncrasies — which is exactly the readability the standards intend.