Study guide

2.3 Commodity Classifications & Storage Configurations

NICET Water-Based Systems Layout Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NICET Certification Program, Exam Formats & Code Framework

1.1 Program Levels, Work History & Certification Pathways 1.2 Core NFPA Standards & Edition Hierarchy 1.3 Reading Architectural, Structural & Mechanical Plans 1.4 Field Surveys & Existing Building Conditions 1.5 Exam Components, Blueprint Weights, Fees & Reference Lists 1.6 Jobsite Safety & Environmental Compliance

2 Chapter 2: Building Construction, Occupancy & Hazard Classification

2.1 Building Construction Types & Fire Resistance 2.2 Occupancy Hazard Classifications 2.3 Commodity Classifications & Storage Configurations 2.4 Special Hazard & Storage Fire Protection Schemes

3 Chapter 3: Water Supply Analysis & Flow Testing

3.1 Municipal Water Supplies & Hydrant Flow Testing 3.2 Water Flow Test Calculations & Graphing 3.3 Private Water Supplies & Dedicated Fire Service Mains 3.4 Water Storage Tanks

4 Chapter 4: Hydraulic Principles & Hazen-Williams Calculations

4.1 Fundamental Hydraulic Principles & Formulas 4.2 The Hazen-Williams Friction Loss Equation 4.3 Equivalent Pipe Lengths for Fittings & Valves 4.4 Standpipe & Manual Fire Suppression Calculations

5 Chapter 5: Hydraulic Calculations for Sprinkler Systems

5.1 Density-Area Method & Design Area Selection 5.2 Sprinkler Nozzle Discharge & K-Factor Formulas 5.3 Step-by-Step Hydraulic Calculation Procedure 5.4 Hydraulic Optimization, Velocity Limits & Computer Modeling

6 Chapter 6: Fire Pumps & Pressure Regulation

6.1 Fire Pump Types, Drivers & Selection 6.2 NFPA 20 Fire Pump Sizing & Characteristic Curves 6.3 Fire Pump Room Layout, Piping & Appurtenances 6.4 Pressure-Regulating Devices & Pressure Relief Valves

7 Chapter 7: Sprinkler System Types & Valve Arrangements

7.1 Wet-Pipe Fire Sprinkler Systems 7.2 Dry-Pipe Fire Sprinkler Systems 7.3 Preaction Sprinkler Systems 7.4 Deluge, Foam-Water & Special Water-Based Systems

8 Chapter 8: Sprinkler Selection, Spacing & Location

8.1 Standard Sprinkler Types, Orientations & Thermal Ratings 8.2 Sprinkler Coverage & Protection Area Limits 8.3 Sprinkler Positioning, Deflector Distances & Sloped Ceilings 8.4 Extended Coverage & Residential Sprinklers

9 Chapter 9: Sprinkler Obstruction & Clearance Rules

9.1 Obstructions to Sprinkler Discharge Pattern 9.2 Continuous & Suspended Obstructions 9.3 Clearance to Storage & Non-Combustible Bulkheads 9.4 Concealed Spaces & Unsprinklered Combustible Cavities

10 Chapter 10: Pipe Supports, Hangers & Seismic Bracing

10.1 Pipe Hanger Types, Trapezes & Structural Attachments 10.2 Hanger Spacing & Location Requirements 10.3 Seismic Sway Bracing Principles & Zone of Influence 10.4 Flexible Couplings, Seismic Separations & Pipe Restraints

11 Chapter 11: Standpipe Systems & Underground Fire Mains

11.1 Standpipe System Layout, Classes & Interconnections 11.2 Fire Department Connections (FDC) Arrangement & Sizing 11.3 Underground Pipe Installation, Depth of Cover & Thrust Blocks 11.4 Hydrostatic Testing, System Flushing & Acceptance Criteria

12 Chapter 12: Working Plans, Submittals, BIM Coordination & Project Management

12.1 Shop Drawings & Working Plan Submittal Requirements 12.2 Hydraulic Calculation Documentation & Submittal Packages 12.3 BIM Coordination, Clash Detection & Trade Integration 12.4 Project Management, Submittal Workflow & AHJ Approval Process

13 Chapter 13: Advanced Code Application, Corrosion Control & System Interfaces

13.1 Pipe Schedule Systems & Determining Their Applicability 13.2 NFPA Standards vs. FM Global Data Sheets 13.3 Working Across Code Editions, Revisions & Retroactivity 13.4 Mitigating Corrosion, MIC & Oxygen Attack 13.5 Internal Obstruction Investigations & Complex ITM Plans 13.6 Pre-Engineered Systems & Interfaces with Other Fire Protection Systems

14 Chapter 14: Estimating, Coordination & Technical Project Management

14.1 Material Takeoffs, Fabrication Stocklists & Shop Tickets 14.2 Value Engineering & Evaluating Design Options 14.3 Project Schedules, Budgets & Expense Control 14.4 Contract Modifications, Change Orders & Managing the Approval Process 14.5 Managing Multiple Projects, Subcontractors & Installer Coordination 14.6 Mixed Occupancies, Special Occupancy Requirements & Building Feature Impacts

2.3 Commodity Classifications & Storage Configurations

Key Takeaways Explain This Topic AI

NFPA 13 defines a storage commodity as the combined assembly of the base product, its packaging (cartons, dividers, crates), and the storage pallet (wood vs. unlisted plastic).

Commodity classes range from Class I (noncombustible products in single-wall cartons on wood pallets, <= 5% unexpanded plastic) to Class IV (combustible products containing 5% to 15% expanded plastic or 15% to 25% unexpanded plastic).

Plastics are divided into Group A (fast-burning, high heat release ~14,000–18,000 BTU/lb), Group B (moderate heat release ~10,000–14,000 BTU/lb), and Group C (low heat release / self-extinguishing ~7,000–10,000 BTU/lb).

Storage configurations include solid piled, palletized, bin box, shelf storage, and rack storage (single-row, double-row, multiple-row, portable racks).

Solid shelving exceeding 20 sq ft creates horizontal water shields that block ceiling sprinkler penetration, mandating in-rack sprinklers, whereas transverse and longitudinal flue spaces (min. 6 inches) provide vertical channels for heat venting and water penetration.

Last updated: August 2026

Commodity Classifications & Storage Configurations

High-piled storage represents the most severe fire challenge encountered in water-based fire protection engineering. As storage heights increase, the vertical surface area of combustible fuel accelerates fire growth exponentially. NFPA 13 classifies commodities into standardized categories based on the product itself, its packaging, and the pallet material , and establishes precise layout rules for rack, palletized, and solid-piled storage.

NFPA 13 Commodity Classification Hierarchy +-----------------------------------------------------------------------------+

  • | COMMODITY CLASSIFICATION FORMULA |
  • | COMMODITY = BASE PRODUCT + PACKAGING MATERIAL + PALLET TYPE |
  • +-----------------------------------------------------------------------------+

A common error in layout design is classifying a commodity solely by the base product. For example, noncombustible steel bolts (Class I) packaged in multi-wall cardboard boxes with heavy wood internal cradles (Class II), wrapped in polyethylene bubble wrap (Class IV or Group A Plastic), and stored on unlisted plastic pallets must be classified according to the highest hazard component of the total unit load. +-----------------------------------------------------------------------------+

  • | COMMODITY CLASSES AT A GLANCE |
  • +-------------+---------------------------------------+-----------------------+
  • | Class | Product Characteristics | Allowable Plastics |
  • +-------------+---------------------------------------+-----------------------+
  • | Class I | Noncombustible in single-wall cartons | <= 5% unexpanded |
  • | Class II | Noncombustible in wood boxes/crates | <= 5% unexpanded |
  • | Class III | Wood, paper, natural textiles | <= 5% exp / 15% unexp |
  • | Class IV | Combustible + moderate plastics | 5-15% exp / 15-25% un |
  • | Group A | Fast-burning polymers (PE, PP, PS) | > 15% exp / > 25% un |
  • +-------------+---------------------------------------+-----------------------+
  • 1. Class I Commodity

Definition: A noncombustible product that meets one of the following criteria:

Placed directly on wooden pallets.

Placed in single-layer corrugated cartons with or without single-thickness cardboard dividers, with or without pallets.

Shrink-wrapped or paper-wrapped as a unit load with or without pallets.

Allowable Plastic Limit: Noncombustible products may contain no more than 5% by weight or volume of unexpanded plastic (e.g., protective plastic caps, friction plugs, or light plastic film wrapping).

Representative Examples: Metal parts, noncombustible foods in glass jars or metal cans, frozen foods in waxed paper cartons, dry gypsum/cement in paper multi-wall sacks, empty glass bottles in cardboard dividers.

2. Class II Commodity

Definition: A noncombustible product that is packaged in slatted wooden crates, solid wooden boxes, multi-wall corrugated wooden containers , or substantial combustible packaging, on or off wooden pallets.

Allowable Plastic Limit: Same as Class I (<= 5% unexpanded plastic).

Representative Examples: Incandescent light bulbs in multi-layer corrugated boxes, beer and wine in solid wooden crates, metal cooking appliances packaged in thick corrugated cartons with heavy wooden corner supports.

3. Class III Commodity

Definition: A product manufactured from wood, paper, natural fibers (cotton, wool, linen), or Class I / Class II products containing combustible packaging or materials , on or off wooden pallets.

Allowable Plastic Limits:

  • Contains <= 5% by weight or volume of expanded plastic (cellular foam), OR
  • Contains <= 15% by weight or volume of unexpanded plastic (solid plastic), OR

A combination of expanded and unexpanded plastic where: % Expanded 5 + % Unexpanded 15 ≤ 1.0 \frac{\% \text{ Expanded}}{5} + \frac{\% \text{ Unexpanded}}{15} \le 1.0 5 % Expanded ​ + 15 % Unexpanded ​ ≤ 1.0

Representative Examples: Books, magazines, paper rolls, natural wood furniture, cotton textiles, grain/flour/sugar in paper bags, charcoal briquettes, mattresses without polyurethane foam.

4. Class IV Commodity

Definition: A Class I, II, or III product that contains significant quantities of plastic , or products manufactured wholly or partially of Group B plastics or cartoned unexpanded Group A plastics.

Allowable Plastic Limits:

  • Contains 5% to 15% by volume of expanded plastic , OR
  • Contains 15% to 25% by volume of unexpanded plastic , OR

A combination of expanded and unexpanded plastic where the total composite fuel load exceeds Class III limits but remains within Class IV thresholds.

Representative Examples: Small household appliances with plastic housings in corrugated cartons, vinyl floor tiles, synthetic clothing and textiles (polyester, nylon blends), cartoned unexpanded plastic bottles/containers, upholstered furniture with light polyurethane foam.

Loading diagram... NFPA 13 Commodity Classification Decision Matrix

Group A, Group B, and Group C Plastics

Plastics possess significantly higher heats of combustion and burning rates than cellulosic materials. Wood produces approximately 8,000 to 9,000 BTU/lb , whereas Group A hydrocarbon-based plastics produce 14,000 to 20,000 BTU/lb —comparable to liquid gasoline. +-----------------------------------------------------------------------------+

  • | PLASTIC CLASSIFICATION MATRIX |
  • +---------+--------------------+----------------------------------------------+
  • | Group | Heat of Combustion | Representative Polymers |
  • +---------+--------------------+----------------------------------------------+
  • | Group A | 14,000-20,000 BTU/lb| PE, PP, PS, PU, ABS, Polycarbonate, FRP, PET |
  • | Group B | 10,000-14,000 BTU/lb| Nylon, Silicone Rubber, Cellulosics, EVA |
  • | Group C | 7,000-10,000 BTU/lb| Rigid PVC, PTFE (Teflon), Melamine, PVDC |
  • +---------+--------------------+----------------------------------------------+
  • 1. Group A Plastics (Severe Fire Hazard)

Group A plastics burn rapidly with intense heat release, heavy black soot production, and rapid pool-fire melting.

Representative Polymers: Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), Polyurethane (PU), Acrylonitrile-Butadiene-Styrene (ABS), Polycarbonate, Polyethylene Terephthalate (PET), Fiberglass-Reinforced Plastic (FRP), Plasticized Polyvinyl Chloride (PVC with > 20% plasticizer).

Sub-Classifications:

Cartoned vs. Exposed: Cartoned plastics are enclosed within corrugated cardboard boxes on all sides and top, which delays plastic ignition. Exposed plastics are open to immediate flame contact.

Unexpanded vs. Expanded: Unexpanded plastics are solid, high-density polymers. Expanded plastics (cellular foams) contain air pockets, resulting in massive surface-area-to-mass ratios that produce explosive fire growth rates.

2. Group B Plastics (Moderate Fire Hazard)

Group B plastics exhibit moderate burning rates and heats of combustion.

Representative Polymers: Cellulosics (cellulose acetate, cellulose acetate butyrate), Chloroprene rubber, Fluorinated ethylene propylene (FEP), Nylon, Silicone rubber, Ethylene-vinyl acetate (EVA).

Layout Rule: Group B plastics are protected equivalently to Class IV commodities .

3. Group C Plastics (Low Fire Hazard)

Group C plastics are dense, char-forming, or self-extinguishing polymers with low heats of combustion.

Representative Polymers: Fluoroplastics (PTFE / Teflon, PVDF), Melamine resins, Phenol-formaldehyde resins, Rigid Polyvinyl Chloride (unplasticized PVC), Polyvinylidene chloride (PVDC / Saran).

Layout Rule: Group C plastics are protected equivalently to Class III commodities .

Pallet Factor & Plastic Pallet Deratings

Standard commodity classifications assume storage on standard wooden pallets . The use of plastic pallets introduces substantial fuel directly at the base of the rack:

Unlisted Plastic Pallets: The use of unlisted (solid or structural foam) polypropylene or polyethylene pallets increases the commodity classification by one full class (e.g., Class I becomes Class II; Class III becomes Class IV). If the commodity is Class IV, the presence of unlisted plastic pallets upgrades the storage to Group A Plastic .

UL-Listed Non-Propagating Pallets: Pallets tested and listed in accordance with UL 2335 or FM 4996 (fire-retardant treated polymers) do not require a commodity class upgrade and are treated the same as standard wooden pallets.

Storage Configurations & Rack Layouts

NFPA 13 defines five primary storage arrangements, each presenting distinct thermodynamic behavior: STORAGE ARRANGEMENT SCHEMATICS:

1. SOLID PILE / PALLETIZED: 2. OPEN WIRE RACK: 3. SOLID SHELF RACK:

  • +---+ +---+ +---+ | | | | +===================+
  • | P | | P | | P | |===+===+===| | | Solid Shelf |
  • |---+ |---+ |---| | P | P | P | +===================+
  • | P | | P | | P | |===+===+===| | | In-Rack Req'd |
  • +---+ +---+ +---+ | P | P | P | +===================+
  • (Direct floor stacks) (>=50% open mesh) (Blocks ceiling water)

Solid Piled Storage: Unit loads, boxes, or bales stacked directly on the floor or on pallets placed directly adjacent to one another without intervening aisles or rack frames.

Palletized Storage: Unit loads placed on pallets, with pallets stacked directly on top of lower pallets in tiered tiers without structural rack framing.

Bin Box Storage: Storage in small, open-faced or compartmentalized boxes not exceeding 30 in. (762 mm) in width, depth, or height, supported on structural frames.

Shelf Storage: Storage on shelves not exceeding 30 in. (762 mm) deep, with aisles not less than 30 in. (762 mm) wide.

Rack Storage: Storage on structural steel framing assemblies:

Single-Row Racks: Racks with a depth not exceeding 6 ft (1.8 m) , separated by aisles of at least 3.5 ft (1.1 m).

Double-Row Racks: Two single-row racks placed back-to-back, with a total combined depth not exceeding 12 ft (3.7 m) , separated by aisles of at least 3.5 ft (1.1 m).

Multiple-Row Racks: Racks with a total depth exceeding 12 ft (3.7 m) or continuous back-to-back racks without separating aisles.

Portable Racks: Moveable steel cantilever or pallet frames that can be stacked on top of one another.

  • Shelving Types & Flue Space Dynamics
  • 1. Solid Shelving vs. Open Wire Decking

Solid Shelving Definition: Shelving that is solid (e.g., plywood, particle board, sheet metal) or slatted with less than 50% open area , where the individual shelf area exceeds 20 sq ft (1.9 m²) .

Fire Protection Consequence: Solid shelves act as horizontal umbrellas, shielding burning pallet loads beneath them from ceiling sprinkler water spray. When solid shelving exceeds 20 sq ft, NFPA 13 mandates the installation of in-rack sprinklers beneath every solid tier .

Open Wire Decking: Wire mesh decking or steel bar grating with >= 50% uniform opening across the entire horizontal surface area allows ceiling sprinkler water to penetrate downward through multiple tiers, eliminating the solid shelf in-rack penalty.

2. Longitudinal and Transverse Flue Spaces

Flue spaces are clear, continuous vertical openings maintained throughout high-piled rack arrays. They perform two critical engineering functions:

Convective Heat Chimneys: Flues allow hot combustion gases to rise freely to the ceiling, rapidly fusing overhead sprinklers directly above the fire plume.

Water Distribution Channels: Flues provide open vertical channels through which downward-discharged sprinkler water penetrates between pallet loads to suppress the core of the fire. RACK FLUE SPACE GEOMETRY (Plan View of Double-Row Rack):

  • +---------------------+ === +---------------------+
  • | Pallet Load A1 | | | Pallet Load B1 |
  • | | | | |
  • +---------------------+ | +---------------------+
  • | <--- Transverse --> | | | <--- Transverse --> |
  • | Flue (3"-6") | | L | Flue (3"-6") |
  • +---------------------+ | o | +---------------------+
  • | Pallet Load A2 | | n | | Pallet Load B2 |
  • | | | g | | |
  • +---------------------+ | i | +---------------------+
  • | | | t | |
  • | AISLE SPACE | | u | | AISLE SPACE
  • | (>= 3.5 ft) | | d | | (>= 3.5 ft)
  • | | | i | |
  • | | | n | |
  • | | | a | |
  • | | | l | |
  • | | | | |
  • | | (6") | |
  • +---------------------+ === +---------------------+

Transverse Flue Spaces: Clear vertical spaces between pallet loads perpendicular to the aisle, having a minimum width of 3 in. (76 mm) to 6 in. (152 mm) .

Longitudinal Flue Spaces: Clear vertical spaces between back-to-back rack rows parallel to the aisle, having a minimum width of 6 in. (152 mm) throughout double-row and multiple-row racks.

Flue Keeper Bars & Load Stops: Mechanical stops installed on rack beams to prevent forklift operators from pushing pallets into the longitudinal flue space, ensuring vertical flue continuity.