Study guide
20.2 Beard and Mustache Trimming
New Jersey Cosmetologist-Hairstylist Licensing Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility and the 1,200-Hour Curriculum 1.3 Prometric Test Day and the Practical Exam
2 Infection Control Foundations
2.1 How Disease and Infection Are Caused and Transmitted 2.2 Cleaning, Disinfection, and Sterilization 2.3 Cross-Contamination and Single- vs Multi-Use Tools
3 Blood Contact, OSHA, and EPA
3.1 Blood Contact Procedures and Exposure Incidents 3.2 OSHA Standards and EPA-Registered Disinfectants
4 Anatomy of Hair, Skin, and Nails
4.1 Hair and Scalp Structure and Growth 4.2 Skin Structure and Function 4.3 Nail Structure and Growth
5 Disorders and Diseases
5.1 Hair and Scalp Disorders and Diseases 5.2 Skin Disorders and Diseases 5.3 Nail Disorders and Diseases
6 Muscles, Nerves, and Circulation
6.1 Muscles and Joints of the Head, Face, Arms, Hands, Legs, and Feet 6.2 Nervous and Circulatory Systems in Salon Work
7 Cosmetic Chemistry and pH
7.1 Product Chemistry, Ingredients, and Interactions 7.2 The pH Scale, Overexposure, and Chemical Burns
8 Hair Consultation, Analysis, and Testing
8.1 Client Consultation, Analysis, and Documentation 8.2 Contraindications for Hair Services 8.3 Predisposition and Strand Tests
9 Hair Tools, Equipment, and Safety
9.1 Implements, Equipment, Supplies, and Disinfection 9.2 Electrical Tools, Safe Use, and Ergonomics
10 Shampoo, Scalp Treatments, and Draping
10.1 Shampooing and Conditioning 10.2 Scalp Treatments, Scalp Massage, and Draping
11 Haircutting and Design Principles
11.1 Haircutting and Shaping 11.2 Balance, Design, and Facial Shapes
12 Hair Styling and Enhancements
12.1 Wet Styling 12.2 Thermal Styling 12.3 Natural Hair Styling and Braiding 12.4 Hair Enhancements: Application and Removal
13 Hair Color and Lightening
13.1 Color Theory, Levels, and Tone 13.2 Hair Coloring Procedures and Safety 13.3 Lightening, Foiling, and Corrective Color
14 Chemical Relaxing and Permanent Waving
14.1 Chemical Relaxing: Hydroxide, Thio, and Keratin 14.2 Permanent Waving and Texturizing: Alkaline, Acid, Non-Thio, Keratin
15 Skin Analysis and Facial Tools
15.1 Skin Types, Conditions, Consultation, and Contraindications 15.2 Facial Tools, Equipment, and Disinfection
16 Facial Procedures
16.1 Cleansing, Steaming, Exfoliation, and Extraction 16.2 Facial Massage and Masks 16.3 Facial Electrical Equipment
17 Hair Removal and Makeup
17.1 Hair Removal: Tweezing, Depilatory, Hard/Soft Wax, Threading 17.2 Makeup, Strip Lashes, and Lash Extensions
18 Natural Nail Services
18.1 Nail Consultation and Contraindications 18.2 Nail Tools, Pedicure Basins, and N.J.A.C. 13:28-3.2 Disinfection 18.3 Basic Manicure and Pedicure
19 Nail Enhancements
19.1 Nail Tips and Extensions 19.2 Acrylics, Wraps, and Overlays 19.3 Nail Art, Maintenance, and Safe Removal
20 Barbering for Cosmetologist-Hairstylists
20.1 Shaving Theory, Razor Safety, and NJ Scope 20.2 Beard and Mustache Trimming
21 New Jersey Licensure and Scope
21.1 Board Structure and License Types 21.2 Cosmetologist-Hairstylist Scope (N.J.A.C. 13:28-1.1(a)1 / N.J.S.A. 45:5B-3(j)) 21.3 Student Permits, Shampoo Permits, Temporary Permits, and Unlicensed Practice
22 New Jersey Shops and Sanitation Law
22.1 Shop Licenses, Experienced Practicing Licensees, Mini-Suites, and Booth Rental 22.2 Shop Premises and Sanitation (N.J.A.C. 13:28-3.1 and 3.2) 22.3 Prohibited Practices, Discipline, Renewal, and Endorsement (N.J.A.C. 13:28-2.15; 1.1(h)–(l); Board FAQ penalties)
20.2 Beard and Mustache Trimming
Key Takeaways Explain This Topic AI
Beard and mustache trimming is inside C-H scope under N.J.A.C. 13:28-1.1(a)1i; N.J.A.C. 13:28-6.29 assigns 5 class plus 10 practical hours (15 total), separate from the 81 shaving hours.
A beautician license does not list beard or mustache shaving or trimming; sending a beautician to outline a beard is a scope error.
Clipper guards set bulk length; trimmers cut the outline; scissor-over-comb blends without a hard weight line — those mechanics are textbook, not N.J.A.C. numbers.
Clipper blades and guards that touched a patron must be cleaned of hair and soil, then disinfected under N.J.A.C. 13:28-3.2(a); oil blades after disinfection so oil does not block the disinfectant.
Consultation plus a clean outline (cheek line, mustache border, neckline) is the service; medical treatment of ingrowns or skin disease is outside cosmetic scope.
Last updated: August 2026
Trimming is not a close shave
Quick Answer: N.J.A.C. 13:28-1.1(a)1i authorizes a cosmetologist-hairstylist to shave or trim the beard, mustache, or other facial hair. N.J.A.C. 13:28-6.29 splits the training: shaving is 81 hours ; beard and mustache trimming is 15 hours ( 5 class + 10 practical). Trimming uses clippers, trimmers, and scissors to shorten and shape. It is not a substitute for a lathered razor shave, and a beautician may not pick it up because N.J.A.C. 13:28-1.1(a)2 never lists the service.
Hoboken example: a software engineer wants a boxed beard, a crisp cheek line, and a mustache that does not enter the mouth — not a hot-towel straight shave. That is a trim . New Brunswick example: the same face after a wedding, asking for cheeks taken to skin. The cheeks are a shave ; the remaining beard is still a trim . Bill and drape them as two related services if that is what you are doing, and sanitize razors and clippers as separate implements.
Domain 5 is only 5 scored items , so NIC will not write a novel about fade theory. It will still ask whether you know scope , outline , tool choice , and sanitation . The practical hours (10) exist because a live jaw, a moving larynx, and a clipper against skin are easy to cut.
Consultation, density, and when to refuse
Ask how they wear the beard at work, whether they want a natural neckline or a hard line, and whether the mustache should sit on the lip or clear it. Comb the beard dry first so you see true length and cowlicks . Photograph consent is shop policy, not a Board form; the Board care is that you do not injure the skin or exceed cosmetic scope.
Density is uneven on almost every face: heavier on the chin, thinner on the cheeks. Do not chase cheek density by cutting the chin to match; you will leave a chin too short and cheeks that still look sparse. Ingrown hairs and barber’s itch (folliculitis) are reasons to soften the service — longer guard, less against-the-grain clipper work — or to decline if the skin is open or infected ( N.J.A.C. 13:28-3.3(d) ). You may cleanse and keep hair out of inflamed follicles as a cosmetic groom. You may not diagnose, lance, or “treat” the infection.
Moles and scars inside the beard: clip around them with scissors or a trimmer; do not run a clipper blade over a raised mole. If the patron has a communicable disease you reasonably believe could spread through the trim, do not serve ( N.J.A.C. 13:28-3.3(d) ). Wash or use a waterless agent before and after the patron ( N.J.A.C. 13:28-3.3(a) ).
Edison example: a client with a dense beard and active, draining bumps along the neckline asks you to “cut it to the skin so it can heal.” That is a medical request dressed as a haircut. Keep length off the lesions, suggest a physician, and do not blade the infected skin.
Clipper guards, trimmers, and the outline
Clipper guards (attachment combs) set a bulk length . Numbering is a manufacturer/textbook convention , not an N.J.A.C. table. On many standard systems, #1 is 1/8 inch , #2 is 1/4 inch , #3 is 3/8 inch , #4 is 1/2 inch , then #5 = 5/8 , #6 = 3/4 , #7 = 7/8 , #8 = 1 inch . Always confirm the number on that brand’s guard; a “#2” that is not 1/4 inch is a brand difference, not a Board trick. Work with the grain for the first pass on curly or coarse beards so you do not chew the hair. A second pass across the grain evens the surface if the skin tolerates it.
Zero-gap or open-blade clippers without a guard cut much closer and behave more like a rough shave. They nick more. Use them only where you intend a near-skin fade into a cheek, and brace your hand. A T-blade trimmer is the outline tool: cheek line, mustache corners, and neckline. The trimmer does not replace scissors on a mustache that sits on the lip — scissors give a softer edge and are less likely to punch the vermilion.
Cheek line: comb the beard up, find where density actually starts, and cut a line the patron can live with at 8 a.m. in a bathroom mirror. A line drawn from the bottom of the ear toward the mustache corner is a common teaching start; adjust for a round versus long face. That geometry is design , not statute.
Neckline: a common textbook start is one to two fingers above the Adam’s apple , following the jaw’s natural curve, rather than a strap that chokes the throat. Too high looks like a floating chin strap; too low leaves a hairy neck under a dress shirt. Have the patron look straight ahead ; a lifted chin fake-shortens the neck.
Mustache: comb down, then cut so hair does not enter the mouth. Work from the center out so both sides stay even. Keep the trimmer off the wet inner lip. If the patron wants a thin line, use scissors over a comb for the body and the trimmer only for the border.
Scissor-over-comb blending
Scissor-over-comb (also taught as shear-over-comb) is the blend between two clipper lengths, or between beard and sideburn, without a hard weight line . Place the comb in the hair, teeth up or slightly angled, and cut the hair that stands through the comb. Move the comb first, then the scissors. Palming the scissors between cuts keeps the tip from stabbing the lip or nostril.
Use it on the mustache body , the soul patch , and the jaw corners where a guard jumps from #3 to #2 and leaves a step. Do not substitute scissor-over-comb for a razor shave on the cheeks — you will pick and pull. Do not cut into the nostril opening; comb the hair out and cut on the comb.
Paterson example: a #4 chin with #2 cheeks left a shelf at the jaw. Scissor-over-comb on that shelf, with the comb following the mandible, removes the step without taking the chin down another full guard.
Textbook clipper guard length in eighths of an inch (confirm the brand)
Loading diagram... Beard and mustache trim workflow
Sanitation of clipper blades and guards
N.J.A.C. 13:28-3.1(i) says electrical appliances must be sanitary and safe, and tools applied to patrons must be cleaned and sanitized after every use under N.J.A.C. 13:28-3.2 . N.J.A.C. 13:28-3.2(a) is the sequence for implements and tools generally:
Clean thoroughly with a mild alkaline detergent to remove soil, blood, or other foreign material (hair and sebum count).
Rinse with tap water.
Process with an EPA-registered disinfectant labeled tuberculocidal for the contact time on the label , or an FDA-registered autoclave .
Follow the manufacturer’s instructions for that disinfectant.
Air-dry and store in a clean drawer .
A one-second “clipper spray” over a mat of hair is not step 1. Brush or pick the hair out, wash off the film, then disinfect. Oil the blades after disinfection , not before; oil on dirty steel blocks contact. Guards that can be washed and disinfected go through the same logic. Guards or other tools that cannot be sanitized are discarded after use ( N.J.A.C. 13:28-3.2(d) ). N.J.A.C. 13:28-3.1(f) requires equipment in a sanitary manner and in good repair — a rusty, chipped clipper blade is out of service.
If a trimmer draws blood, treat it as you would a razor nick at the chair: stop, glove, styptic liquid or powder (not a pencil — N.J.A.C. 13:28-3.4(b) ), then detergent-clean and tuberculocidal-disinfect that clipper. Do not “wipe and keep going” on the next patron. Chapter 3 still owns the full OSHA exposure file; this is the service-level duty.
Capes and neck strips: use a fresh neck strip or clean cape barrier so the cape does not sit on skin. Linens follow N.J.A.C. 13:28-3.1(h) .
Trenton shop example: four beard trims in a row on one clipper, sprayed for two seconds between men, guards dropped in a drawer with hair still in the teeth. That fails 13:28-3.2(a) twice — no detergent clean, no labeled contact time — and 13:28-3.1(i) because the tool went back on a patron dirty.
Who may perform the trim
- License (N.J.A.C. 13:28-1.1) Beard / mustache shave or trim
- Cosmetologist-hairstylist (a)1i Yes
- Barber (a)3i Yes
- Beautician (a)2 Not listed — do not assign this service
- Skin care specialist (a)4 Not listed
- Manicurist (a)5 Not listed
Atlantic City example: a dual-license shop has a beautician with an empty chair and a C-H licensee in color. The manager cannot “just have the beautician outline the beard.” The beautician list never added facial shaving or trimming. The C-H or barber takes the beard, or the patron waits.
Exam traps
Trap: “Beard trimming is the same 81 shaving hours.” 13:28-6.29 gives trimming its own 15 hours .
Trap: “Any Board licensee in the shop may outline a beard.” Check the (a) list for that license.
Trap: “Guard numbers are in N.J.A.C.” They are brand/textbook lengths; confirm the comb in your hand.
Trap: “Oil first, then spray disinfectant.” Clean, rinse, disinfect, then oil.
Trap: “Scissor-over-comb is only for haircuts.” It is the blend tool inside the beard and mustache as well.