Study guide
11.1 Haircutting and Shaping
New Jersey Cosmetologist-Hairstylist Licensing Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility and the 1,200-Hour Curriculum 1.3 Prometric Test Day and the Practical Exam
2 Infection Control Foundations
2.1 How Disease and Infection Are Caused and Transmitted 2.2 Cleaning, Disinfection, and Sterilization 2.3 Cross-Contamination and Single- vs Multi-Use Tools
3 Blood Contact, OSHA, and EPA
3.1 Blood Contact Procedures and Exposure Incidents 3.2 OSHA Standards and EPA-Registered Disinfectants
4 Anatomy of Hair, Skin, and Nails
4.1 Hair and Scalp Structure and Growth 4.2 Skin Structure and Function 4.3 Nail Structure and Growth
5 Disorders and Diseases
5.1 Hair and Scalp Disorders and Diseases 5.2 Skin Disorders and Diseases 5.3 Nail Disorders and Diseases
6 Muscles, Nerves, and Circulation
6.1 Muscles and Joints of the Head, Face, Arms, Hands, Legs, and Feet 6.2 Nervous and Circulatory Systems in Salon Work
7 Cosmetic Chemistry and pH
7.1 Product Chemistry, Ingredients, and Interactions 7.2 The pH Scale, Overexposure, and Chemical Burns
8 Hair Consultation, Analysis, and Testing
8.1 Client Consultation, Analysis, and Documentation 8.2 Contraindications for Hair Services 8.3 Predisposition and Strand Tests
9 Hair Tools, Equipment, and Safety
9.1 Implements, Equipment, Supplies, and Disinfection 9.2 Electrical Tools, Safe Use, and Ergonomics
10 Shampoo, Scalp Treatments, and Draping
10.1 Shampooing and Conditioning 10.2 Scalp Treatments, Scalp Massage, and Draping
11 Haircutting and Design Principles
11.1 Haircutting and Shaping 11.2 Balance, Design, and Facial Shapes
12 Hair Styling and Enhancements
12.1 Wet Styling 12.2 Thermal Styling 12.3 Natural Hair Styling and Braiding 12.4 Hair Enhancements: Application and Removal
13 Hair Color and Lightening
13.1 Color Theory, Levels, and Tone 13.2 Hair Coloring Procedures and Safety 13.3 Lightening, Foiling, and Corrective Color
14 Chemical Relaxing and Permanent Waving
14.1 Chemical Relaxing: Hydroxide, Thio, and Keratin 14.2 Permanent Waving and Texturizing: Alkaline, Acid, Non-Thio, Keratin
15 Skin Analysis and Facial Tools
15.1 Skin Types, Conditions, Consultation, and Contraindications 15.2 Facial Tools, Equipment, and Disinfection
16 Facial Procedures
16.1 Cleansing, Steaming, Exfoliation, and Extraction 16.2 Facial Massage and Masks 16.3 Facial Electrical Equipment
17 Hair Removal and Makeup
17.1 Hair Removal: Tweezing, Depilatory, Hard/Soft Wax, Threading 17.2 Makeup, Strip Lashes, and Lash Extensions
18 Natural Nail Services
18.1 Nail Consultation and Contraindications 18.2 Nail Tools, Pedicure Basins, and N.J.A.C. 13:28-3.2 Disinfection 18.3 Basic Manicure and Pedicure
19 Nail Enhancements
19.1 Nail Tips and Extensions 19.2 Acrylics, Wraps, and Overlays 19.3 Nail Art, Maintenance, and Safe Removal
20 Barbering for Cosmetologist-Hairstylists
20.1 Shaving Theory, Razor Safety, and NJ Scope 20.2 Beard and Mustache Trimming
21 New Jersey Licensure and Scope
21.1 Board Structure and License Types 21.2 Cosmetologist-Hairstylist Scope (N.J.A.C. 13:28-1.1(a)1 / N.J.S.A. 45:5B-3(j)) 21.3 Student Permits, Shampoo Permits, Temporary Permits, and Unlicensed Practice
22 New Jersey Shops and Sanitation Law
22.1 Shop Licenses, Experienced Practicing Licensees, Mini-Suites, and Booth Rental 22.2 Shop Premises and Sanitation (N.J.A.C. 13:28-3.1 and 3.2) 22.3 Prohibited Practices, Discipline, Renewal, and Endorsement (N.J.A.C. 13:28-2.15; 1.1(h)–(l); Board FAQ penalties)
11.1 Haircutting and Shaping
Key Takeaways Explain This Topic AI
N.J.A.C. 13:28-6.29 assigns 160 hours (40 class + 120 practical) to Hair & Basic Layer & Clipper Cut, including razor, scissors, thinning shears, and tapering.
A New Jersey cosmetologist-hairstylist license authorizes cutting hair under N.J.A.C. 13:28-1.1(a)1ii; clipper work sits inside that C-H curriculum unit, not outside it.
Elevation 0° builds a blunt weight line, about 45° builds graduation, 90° builds uniform layers, and above 90° shortens the interior for long layers.
A stationary guideline sends later hair to one point so length increases away from it; a traveling guideline keeps projected length consistent.
Apply infection control to shears, razors, clipper blades, and guards between clients; dull razors tear, and blood on a blade is an exposure incident.
Last updated: August 2026
Why New Jersey spends 160 hours on cutting
Quick Answer: NIC New Jersey theory Domain 2.D.1 tests principles, procedures, and safety of haircutting and shaping . N.J.A.C. 13:28-6.29 assigns 160 hours to Hair & Basic Layer & Clipper Cut — razor, scissors, thinning shears, and tapering —as 40 class hours plus 120 practical hours. A cosmetologist-hairstylist license authorizes cutting hair under N.J.A.C. 13:28-1.1(a)1ii and N.J.S.A. 45:5B-3(j)(2). Clipper cutting is inside this C-H unit, not a barber-only extra you can skip because you prefer scissor work.
Domain 2 (Hair Care and Services) is 40 of the 110 weighted items. NIC does not publish how many of those 40 sit inside 2.D.1 versus styling or chemical services. Treat cutting as a core C-H skill.
Infection control for tools is already a prior chapter. Apply it here: shears, razors, clipper blades, detachable guards, combs, and sectioning clips are multi-use . Remove hair and product film, then disinfect with an EPA-registered disinfectant for the label contact time before the next client. A neck strip plus cutting cape is a cutting drape , not a shampoo drape. Blood on a blade is an exposure incident —stop, follow the blood-contact procedure, and do not wipe a contaminated razor and keep going.
Elevation: 0°, 45°, and 90°
Elevation (projection) is the angle you lift a subsection from the head form before you cut. Elevation—not the shear brand—decides whether you build a solid weight line , a stacked graduation , or layers . Finger angle is the cutting line ; elevation is how far the hair is held off the head.
- Elevation How you hold the hair Where weight lives Classic result
- 0° Natural fall; no lift Perimeter Blunt / one-length
- About 45° Between fall and horizontal Stacks toward the interior Graduated / stacked
- 90° Perpendicular to the head form Even through the subsection Uniform layers
- Above 90° Over-elevated Shorter interior, longer outline Long layers / face-frame
At 0° , every hair hangs to the same line when the head is upright. If you lift the nape just a little while claiming a blunt cut, you have already started graduation. At about 45° , the interior of the subsection is shorter than the exterior when the hair drops, so length stacks —wedges, stacked bobs, and many A-line perimeters. At 90° , each subsection is held straight out from the curve of the skull and cut to a consistent projected length. Finished hanging lengths still follow the round head; they are not a ruler line in space. Over-elevation past 90° shortens the interior (crown, fringe) relative to the perimeter, which is how you keep long hair at the outline while removing bulk on top.
Head position changes elevation without you noticing. If the client tucks the chin, nape hair lengthens in your fingers; they sit up later and the nape jumps short. Keep the head upright for most perimeter work unless you are deliberately using posture.
Blunt, graduated, and layered cuts
A blunt (one-length) cut uses 0° and a stationary perimeter guideline . Ends meet in a solid line and look denser at the outline. Uneven tension, a tilted head, or ignoring wet-to-dry shrinkage shows as a hole or a step.
A graduated cut uses elevation below 90° , commonly around 45° . Each hanging subsection is slightly shorter than the hair below it. Vertical or diagonal partings let you see the stack.
A layered cut uses 90° (uniform) or higher (long layers). Layers move weight so hair can move. Uniform 90° layers on very fine hair can look thin at the outline; the same layers on very dense hair can explode in volume. Density is a design input, not an afterthought.
New Jersey’s curriculum title is basic layer and clipper cut . Live work is usually a combination : scissor layers over a clipper taper, or a blunt outline with layers above the parietal ridge .
Guidelines, overdirection, and partings
A guideline is the first cut that later hair matches.
A stationary (fixed) guideline stays in one place. Later hair is combed to that point. Length increases as you move away from the stationary point. That is how you build strong layering or a strong weight pile-up, depending on elevation.
A traveling (mobile) guideline moves: each newly cut subsection becomes the guide for the next. Projected length stays consistent —the engine of uniform layers.
Overdirection is combing hair away from its natural falling position before you cut. Overdirect forward and you leave length in the back . Overdirect back and you leave length toward the face . No overdirection lets hair follow the head form. Face-framing long layers are overdirection plus elevation, not a mystery finishing spray.
Partings control what you can see while you cut:
- Horizontal — blunt perimeters and low elevation
- Vertical — graduation and layers
- Diagonal — softer transitions
- Radial / pivot from the apex — round layers
Subsections must be thin enough that you can see the guide through the hair. School convention is often about 1/8 to 1/4 inch , adjusted for density—this is a teaching range, not a Board inch rule. Fat subsections hide the guide and create steps. Tension must be consistent ; yanking a side section down toward the shoulder over-directs and shortens that side.
N.J.A.C. 13:28-6.29 Hair & Basic Layer & Clipper Cut hours
Loading diagram... Elevation to cut type
Wet cutting versus dry cutting
Wet cutting is the usual method for scissor precision: cuticles lie flatter, partings stay visible, and tension is even. You must still plan for shrinkage . Curly and coiled hair can contract a great deal as it dries; even straight hair shortens slightly. Cutting soaking-wet curls to the client’s requested dry length is how you send someone home too short. For highly textured hair, many designers cut dry or damp in the natural fall so shrinkage is already visible.
Dry cutting is how you refine balance, check the silhouette in the natural fall, and texturize. Clipper tapers are usually done on dry hair so you can see true length and the blend line. Razors generally perform on clean, damp hair with a water or lubricant film. A dull razor on dry, coarse, or tightly coiled hair tears . Never razor hair that is chemically mushy or a scalp that is abraded.
After a wet cut, cross-check dry: opposite partings, both sides, and the natural fall. Cross-checking is part of the cut, not a luxury if time remains.
Texturizing without destroying the line
Texturizing removes bulk or softens ends without intending to change overall length . Deep point-cutting the last half-inch of a blunt bob does change the line whether you meant to or not.
- Technique Tool What it does
- Point cutting Shears Tips of the blades into the ends; softer, broken perimeter
- Notching Shears Deeper, chunkier gaps
- Slide cutting Slightly open shears Tapers a strand while sliding; high control demand
- Slithering / effilating Shears Sliding nearly closed blades to reduce bulk
Thinning / blending Thinning shears (notched blade) Removes a share of hairs. Keep them off the hairline and off the last bit of a one-length line unless you want holes
Razor Straight or guarded razor Wispy, tapered ends; high error cost if the blade is dull
N.J.A.C. 13:28-6.29 names thinning shears in the 160-hour row on purpose. Theory items distinguish density reduction from length reduction. Mid-strand thinning can flatten a thick interior; the same tool on a solid weight line punches gaps.
Clipper cutting, tapering, and clipper-over-comb
The same curriculum row names clipper cut and tapering . A C-H student who only practices scissor bobs is not covering 13:28-6.29. Scope language in 13:28-1.1(a)1ii is cutting the hair; the hour table is where New Jersey writes clipper in so many words.
Guards set a consistent length. Brands do not share one universal inch chart, so do not memorize a single manufacturer’s number-to-inch table as if it were a Board rule. Blend successive lengths. The usual failure is a shelf where two guards meet with no overlap.
Clipper-over-comb uses the comb as a traveling guide . Hair is lifted in the comb; the clipper runs across the teeth. Comb angle is elevation. A comb that stands away from the head leaves more length; a comb that hugs the head takes more hair. This is how you taper over the occipital bone and around the ears without a hard guard line.
Tapering is a gradual length increase from the hairline up. Outlining with a trimmer or unguarded clipper defines sideburns, ears, and nape. Do not outline so high that you cut a hole into a recession (section 11.2).
Clipper safety: blades must seat fully; a loose blade chatters and nicks. Do not ram a clipper through wet, product-caked hair. Disconnect or lock off before you change blades. Disinfect blades and detachable guards between clients the same way you treat other multi-use implements. Palming a running clipper at an ear requires the same spatial control as a razor.
Shear and razor safety
Shears: ring finger in the finger bow, thumb in the thumb bow, pinky on the tang . Only the thumb moves. Palm shears while you comb so the points are not aimed at the skull. If a shear falls, do not grab the blades. Tension that is too tight fatigues you and folds hair; tension that is too loose chews the cut.
Razors: a dull blade tears hair and skin. Change blades as soon as you feel drag. Never cut toward the eyes. Do not razor over inflamed or broken skin. Blood means stop , run the exposure procedure you already learned, and discard the contaminated blade. A guard reduces laceration risk; it does not make a razor harmless.
Stand with a stable base, set the chair so your wrists stay near neutral, and keep the work in front of you instead of reaching around the client. Cutting is a high-repetition task; collapsed shoulders produce collapsed lines.
Domain 2.D.1 traps
Calling 90° a blunt cut (that is layers; blunt is 0° ).
Treating clipper work as optional for a C-H candidate.
Using thinning shears on the last inch of a one-length line and expecting a solid weight line.
Cutting curly hair to finished dry length while it is soaking wet.
Skipping dry cross-check .
Ignoring a cowlick or whorl until the hair spikes—map growth before the first guideline (section 11.2).