Study guide
19.1 Nail Tips and Extensions
New Jersey Cosmetologist-Hairstylist Licensing Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility and the 1,200-Hour Curriculum 1.3 Prometric Test Day and the Practical Exam
2 Infection Control Foundations
2.1 How Disease and Infection Are Caused and Transmitted 2.2 Cleaning, Disinfection, and Sterilization 2.3 Cross-Contamination and Single- vs Multi-Use Tools
3 Blood Contact, OSHA, and EPA
3.1 Blood Contact Procedures and Exposure Incidents 3.2 OSHA Standards and EPA-Registered Disinfectants
4 Anatomy of Hair, Skin, and Nails
4.1 Hair and Scalp Structure and Growth 4.2 Skin Structure and Function 4.3 Nail Structure and Growth
5 Disorders and Diseases
5.1 Hair and Scalp Disorders and Diseases 5.2 Skin Disorders and Diseases 5.3 Nail Disorders and Diseases
6 Muscles, Nerves, and Circulation
6.1 Muscles and Joints of the Head, Face, Arms, Hands, Legs, and Feet 6.2 Nervous and Circulatory Systems in Salon Work
7 Cosmetic Chemistry and pH
7.1 Product Chemistry, Ingredients, and Interactions 7.2 The pH Scale, Overexposure, and Chemical Burns
8 Hair Consultation, Analysis, and Testing
8.1 Client Consultation, Analysis, and Documentation 8.2 Contraindications for Hair Services 8.3 Predisposition and Strand Tests
9 Hair Tools, Equipment, and Safety
9.1 Implements, Equipment, Supplies, and Disinfection 9.2 Electrical Tools, Safe Use, and Ergonomics
10 Shampoo, Scalp Treatments, and Draping
10.1 Shampooing and Conditioning 10.2 Scalp Treatments, Scalp Massage, and Draping
11 Haircutting and Design Principles
11.1 Haircutting and Shaping 11.2 Balance, Design, and Facial Shapes
12 Hair Styling and Enhancements
12.1 Wet Styling 12.2 Thermal Styling 12.3 Natural Hair Styling and Braiding 12.4 Hair Enhancements: Application and Removal
13 Hair Color and Lightening
13.1 Color Theory, Levels, and Tone 13.2 Hair Coloring Procedures and Safety 13.3 Lightening, Foiling, and Corrective Color
14 Chemical Relaxing and Permanent Waving
14.1 Chemical Relaxing: Hydroxide, Thio, and Keratin 14.2 Permanent Waving and Texturizing: Alkaline, Acid, Non-Thio, Keratin
15 Skin Analysis and Facial Tools
15.1 Skin Types, Conditions, Consultation, and Contraindications 15.2 Facial Tools, Equipment, and Disinfection
16 Facial Procedures
16.1 Cleansing, Steaming, Exfoliation, and Extraction 16.2 Facial Massage and Masks 16.3 Facial Electrical Equipment
17 Hair Removal and Makeup
17.1 Hair Removal: Tweezing, Depilatory, Hard/Soft Wax, Threading 17.2 Makeup, Strip Lashes, and Lash Extensions
18 Natural Nail Services
18.1 Nail Consultation and Contraindications 18.2 Nail Tools, Pedicure Basins, and N.J.A.C. 13:28-3.2 Disinfection 18.3 Basic Manicure and Pedicure
19 Nail Enhancements
19.1 Nail Tips and Extensions 19.2 Acrylics, Wraps, and Overlays 19.3 Nail Art, Maintenance, and Safe Removal
20 Barbering for Cosmetologist-Hairstylists
20.1 Shaving Theory, Razor Safety, and NJ Scope 20.2 Beard and Mustache Trimming
21 New Jersey Licensure and Scope
21.1 Board Structure and License Types 21.2 Cosmetologist-Hairstylist Scope (N.J.A.C. 13:28-1.1(a)1 / N.J.S.A. 45:5B-3(j)) 21.3 Student Permits, Shampoo Permits, Temporary Permits, and Unlicensed Practice
22 New Jersey Shops and Sanitation Law
22.1 Shop Licenses, Experienced Practicing Licensees, Mini-Suites, and Booth Rental 22.2 Shop Premises and Sanitation (N.J.A.C. 13:28-3.1 and 3.2) 22.3 Prohibited Practices, Discipline, Renewal, and Endorsement (N.J.A.C. 13:28-2.15; 1.1(h)–(l); Board FAQ penalties)
19.1 Nail Tips and Extensions
Key Takeaways Explain This Topic AI
N.J.A.C. 13:28-1.1(a)1vii authorizes a New Jersey cosmetologist-hairstylist to manicure fingernails, nail-sculpture, and pedicure toenails; enhancement work is cosmetic sculpturing, not medical care.
N.J.A.C. 13:28-6.29 places manicuring and pedicure — including tips and overlays — in one 135-hour block (45 class, 90 practical); the Board does not publish a separate acrylic-hour line.
A tip must sit sidewall to sidewall in a relaxed state; if sizes fall between numbers, file the larger plastic tip down rather than thinning the natural plate.
Blend only the ABS well. Abrasive on bare keratin gouges the dorsal layers and creates painful grooves technicians call rings of fire.
N.J.A.C. 13:28-3.2(d) requires discarding emery boards, orangewood sticks, and any tool that cannot be sanitized after each client; metal cutters follow the reusable-manicuring disinfection path.
Last updated: August 2026
Nail enhancements are the remaining Domain 4 work on the NIC New Jersey Cosmetologist-Hair Stylist theory exam: application, maintenance, and removal of tips, extensions, acrylics, wraps, overlays, and nail art. Natural-nail consultation, pedicure basin chemistry under N.J.A.C. 13:28-3.2, and the basic manicure sequence are Chapter 18. This chapter starts where length and product begin.
For a New Jersey cosmetologist-hairstylist , the Board's written nail authority is N.J.A.C. 13:28-1.1(a)1vii : manicuring the fingernails, nail-sculpturing , or pedicuring the toenails. N.J.S.A. 45:5B-3 uses the same sculpturing language in the statutory definition of cosmetology and hairstyling. Sculpturing means cosmetic construction on the nail plate — tips, overlays, and built extensions — not diagnosis or treatment of disease. A limited manicurist license lists the same three nail services under 13:28-1.1(a)5; you are testing as a C-H candidate, so you carry those services plus hair, skin, and barbering.
Do not invent a separate Board hour table for acrylics. N.J.A.C. 13:28-6.29 puts all manicuring and pedicure instruction inside one curriculum block: 45 hours of class, 90 hours of practical, 135 hours total . Tips, wraps, liquid-and-powder, gel overlays, art, fills, and removal are taught inside that block, not as a second numbered subject.
What a nail tip is — and what it is not
A nail tip is a pre-formed plastic extension, almost always molded from acrylonitrile butadiene styrene (ABS) , that adds free-edge length quickly. A bare tip is a platform, not a finished service. Plastic chips, yellows, and lifts unless you cover it with an overlay (liquid-and-powder, wrap resin, or gel — Section 19.2). The competing length method is a sculpting form : paper, foil, or metal that slides under the natural free edge so you build length from product alone, with no plastic well to blend. Forms are classic nail sculpturing ; tips are a faster length aid that still must be sculpted over.
Tip anatomy
Three molded features control whether the tip protects the plate or abuses it:
Well (contact area): the inner depression that receives adhesive and sits on the natural plate.
Position stop: the ridge that meets the natural free edge so the well cannot slide toward the eponychium.
Sidewalls: the lateral walls. They must line up with the natural grooves. Plastic sitting on living skin is a poor fit and a later lift.
Well type Typical plate coverage Best use Blending demand
Full well Up to about one-half of the plate Very short, bitten, or damaged nails that need adhesive area Highest — a large plastic seam
- Partial well About one-quarter of the plate Average plates with a usable free edge Moderate
- Well-less / seamless Free edge only Longer natural nails; least plate coverage Lowest when the stop is true
Those coverage fractions are product-fitting conventions , not a New Jersey regulation. What the Board does regulate is staying on the nail plate and off living tissue. N.J.A.C. 13:28-2.15(b)1 forbids a credo blade, skin scraper, lancet, or comparable implement on licensed premises. That ban does not pause because you are fitting a toe tip or cleaning a stubborn hyponychium. You may push dead cuticle film with a sanitized metal pusher or a disposable orangewood stick. You may not lance, scrape living skin, or cut below the stratum corneum.
Sizing without damaging the natural plate
Manufacturer numbering commonly runs #1 (widest) through #10 (narrowest) . The non-negotiable fit rule is sidewall to sidewall in a relaxed state . The plastic must span groove to groove without being squeezed. An undersized tip flattens the natural C-curve , pinches the bed, and later cracks or pops at the sidewalls. If you are between sizes, take the larger tip and custom-file the plastic lateral edges until it drops in flush. Never file the natural plate narrower to match a small tip — that is how keratin is thinned into a raw, grooved surface.
Prep is deliberately light. Wash and inspect first; if you see infection, inflammation, or a condition Chapter 18 taught you to refuse, you stop. Gently push back the eponychium. Remove only the dead cuticle film that clings to the plate — not living eponychium. De-shine with a fine buffer (about 240 grit) in the direction of growth. Coarse grit on bare keratin strips dorsal layers. Semicircular gouges from a tilted abrasive or e-file bit are rings of fire : painful grooves in living-adjacent plate. Dust off, dehydrate with a manufacturer dehydrator or isopropyl alcohol, and keep massage oil off the plate. Oil is a release agent; adhesive will not hold.
Attachment: stop-and-rock
Ethyl cyanoacrylate is the usual tip adhesive (the same family as wrap resin). Place a small amount in the well — enough to wet the contact area, not a puddle that floods the eponychium. Hold the tip at roughly a 45-degree angle to the free edge, slide until the position stop seats against the natural edge, then rock the well down onto the plate to chase out air. White spots under the plastic are trapped air and a scheduled lift. Hold about 5 to 10 seconds until the bond sets. Adhesive on living skin is a sensitization risk and a bond you soak off; you do not rip skin free.
Trim length with a dedicated tip cutter or clipper made for plastic. Cut the free-edge plastic, not the natural plate. Support the tip while you shape so you do not lever the fresh bond. Shape the extension to the client's requested silhouette (square, squoval, oval, almond) before you commit to a heavy overlay; altering a glued undersized tip after the fact usually means grinding into keratin.
Blending the well without thinning keratin
The seam between plastic and plate must disappear so the overlay sits on a continuous surface. The abrasive may work only on the plastic well . Hold a 180- or 240-grit file flat to that well. Light strokes across the contact edge until the well is flush and the seam is no longer a ridge. The instant grit walks onto bare plate, stop. You are done when the well is thin and the natural plate still has its intact dorsal shine just behind the seam. Liquid plastic-melting "blenders" exist in some kits; if a manufacturer includes one, keep it on plastic and off skin. Blender is not a substitute for correct sizing, and it is not a license to dissolve keratin.
Tips versus forms
Choose a tip when the natural free edge is too short to support a form, when you need speed, or when a consistent barrel matters more than a custom C-curve. Choose a form when you want sculptured length with no plastic seam and a C-curve you pinch and tailor. Either method is length only. Strength comes from the overlay in Section 19.2. A tip without overlay is a chip waiting to happen; a form without structured product is an empty template.
Implements: discard versus disinfect
Enhancement work multiplies porous waste. N.J.A.C. 13:28-3.2(d) is the sentence to memorize: a licensee shall discard after each use all emery boards, orangewood sticks, and all implements and tools that cannot be sanitized . That includes used sanding bands, foam buffers that absorbed product, and files that soaked up monomer or adhesive. Multi-use metal tools — tip cutters, metal pushers, nippers used only on dead cuticle — follow the reusable-manicuring path in 13:28-3.2: enzyme pre-soak, ultrasonic cycle as the rule describes, inspect for rust and pitting, then an EPA-registered tuberculocidal disinfectant for the label contact time , or an FDA-registered autoclave, then air-dry storage in a clean drawer. Pedicure basin contact times and bleach dilutions stay in Chapter 18; applying a toe tip does not rewrite them.
After a tip set, the client still has a natural plate underneath. Redness, pus, or painful separation is not "filled over." You refuse, document, and refer. Cosmetologist-hairstylist scope is cosmetic nail-sculpturing, not medical care of the nail unit.