Study guide
12.2 Thermal Styling
New Jersey Cosmetologist-Hairstylist Licensing Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility and the 1,200-Hour Curriculum 1.3 Prometric Test Day and the Practical Exam
2 Infection Control Foundations
2.1 How Disease and Infection Are Caused and Transmitted 2.2 Cleaning, Disinfection, and Sterilization 2.3 Cross-Contamination and Single- vs Multi-Use Tools
3 Blood Contact, OSHA, and EPA
3.1 Blood Contact Procedures and Exposure Incidents 3.2 OSHA Standards and EPA-Registered Disinfectants
4 Anatomy of Hair, Skin, and Nails
4.1 Hair and Scalp Structure and Growth 4.2 Skin Structure and Function 4.3 Nail Structure and Growth
5 Disorders and Diseases
5.1 Hair and Scalp Disorders and Diseases 5.2 Skin Disorders and Diseases 5.3 Nail Disorders and Diseases
6 Muscles, Nerves, and Circulation
6.1 Muscles and Joints of the Head, Face, Arms, Hands, Legs, and Feet 6.2 Nervous and Circulatory Systems in Salon Work
7 Cosmetic Chemistry and pH
7.1 Product Chemistry, Ingredients, and Interactions 7.2 The pH Scale, Overexposure, and Chemical Burns
8 Hair Consultation, Analysis, and Testing
8.1 Client Consultation, Analysis, and Documentation 8.2 Contraindications for Hair Services 8.3 Predisposition and Strand Tests
9 Hair Tools, Equipment, and Safety
9.1 Implements, Equipment, Supplies, and Disinfection 9.2 Electrical Tools, Safe Use, and Ergonomics
10 Shampoo, Scalp Treatments, and Draping
10.1 Shampooing and Conditioning 10.2 Scalp Treatments, Scalp Massage, and Draping
11 Haircutting and Design Principles
11.1 Haircutting and Shaping 11.2 Balance, Design, and Facial Shapes
12 Hair Styling and Enhancements
12.1 Wet Styling 12.2 Thermal Styling 12.3 Natural Hair Styling and Braiding 12.4 Hair Enhancements: Application and Removal
13 Hair Color and Lightening
13.1 Color Theory, Levels, and Tone 13.2 Hair Coloring Procedures and Safety 13.3 Lightening, Foiling, and Corrective Color
14 Chemical Relaxing and Permanent Waving
14.1 Chemical Relaxing: Hydroxide, Thio, and Keratin 14.2 Permanent Waving and Texturizing: Alkaline, Acid, Non-Thio, Keratin
15 Skin Analysis and Facial Tools
15.1 Skin Types, Conditions, Consultation, and Contraindications 15.2 Facial Tools, Equipment, and Disinfection
16 Facial Procedures
16.1 Cleansing, Steaming, Exfoliation, and Extraction 16.2 Facial Massage and Masks 16.3 Facial Electrical Equipment
17 Hair Removal and Makeup
17.1 Hair Removal: Tweezing, Depilatory, Hard/Soft Wax, Threading 17.2 Makeup, Strip Lashes, and Lash Extensions
18 Natural Nail Services
18.1 Nail Consultation and Contraindications 18.2 Nail Tools, Pedicure Basins, and N.J.A.C. 13:28-3.2 Disinfection 18.3 Basic Manicure and Pedicure
19 Nail Enhancements
19.1 Nail Tips and Extensions 19.2 Acrylics, Wraps, and Overlays 19.3 Nail Art, Maintenance, and Safe Removal
20 Barbering for Cosmetologist-Hairstylists
20.1 Shaving Theory, Razor Safety, and NJ Scope 20.2 Beard and Mustache Trimming
21 New Jersey Licensure and Scope
21.1 Board Structure and License Types 21.2 Cosmetologist-Hairstylist Scope (N.J.A.C. 13:28-1.1(a)1 / N.J.S.A. 45:5B-3(j)) 21.3 Student Permits, Shampoo Permits, Temporary Permits, and Unlicensed Practice
22 New Jersey Shops and Sanitation Law
22.1 Shop Licenses, Experienced Practicing Licensees, Mini-Suites, and Booth Rental 22.2 Shop Premises and Sanitation (N.J.A.C. 13:28-3.1 and 3.2) 22.3 Prohibited Practices, Discipline, Renewal, and Endorsement (N.J.A.C. 13:28-2.15; 1.1(h)–(l); Board FAQ penalties)
12.2 Thermal Styling
Key Takeaways Explain This Topic AI
N.J.A.C. 13:28-6.29 assigns 45 hours (10 class, 35 practical) to thermal curling and waving; chemical relaxing and pressing is a separate 90-hour line, so a pressing comb is not the same curriculum cell as a marcel iron.
Blow waving is named in the 160-hour hairstyling block, but the dryer is still an electrical appliance that must stay sanitary and safe under N.J.A.C. 13:28-3.1(f).
Place a hard-rubber or other nonflammable comb between a hot iron or pressing comb and the scalp; metal combs conduct heat, and celluloid combs can ignite.
Heat damage includes raised cuticle, lost elasticity, and bubble hair when water trapped in the cortex flashes to steam; burns happen when an iron rests on skin, ears, or a cape.
Unplug thermal tools before cleaning plates or barrels; do not operate dryers or irons with wet hands or with a missing grounding pin.
Last updated: August 2026
Thermal styling on a New Jersey paper
CIB Domain 2.D.2 lists thermal styling beside wet styling and natural hair styling. Heat temporarily breaks and reforms hydrogen bonds the same way water does, with a faster, drier workflow and a higher injury risk. New Jersey’s hour table does not dump every hot tool into one cell.
13:28-6.29 line Hours (class / practical / total) Thermal tools that actually live here
Hairstyling (pin curls, fingerwaving, blow waving , weaving) 25 / 135 / 160 Blow dryer used to wave and shape damp hair
- Thermal Curling & Waving 10 / 35 / 45 Curling iron, marcel iron, waving techniques with a heated rod
- Chemical Relaxing & Pressing 30 / 60 / 90 Pressing comb (and chemical relaxers, which are Chapter 14)
That split is an exam trap. A candidate who says “all heat is 45 hours” misses blow waving in the 160-hour line and pressing in the 90-hour line. The Board has not published a required barrel temperature in Fahrenheit. Temperature comes from the manufacturer and from hair analysis (fine, porous, or chemically treated hair takes less heat than resistant, dense hair). Inventing a New Jersey degree table is how you fail a safety item.
N.J.A.C. 13:28-3.1(f) still governs the appliance: tools, implements, and electrical appliances must be maintained in a sanitary and safe manner, and tools applied directly to patrons must be cleaned and sanitized after each use under 13:28-3.2 when the part can be processed. A peeling Teflon plate, a frayed cord, or a missing grounding pin is not safe. UL listing is not written as the Board’s magic word, but a cracked unlisted iron is not professional practice under a “safe appliance” rule.
Blow-dry styling (blow waving)
You already met blow waving in 12.1 as a 160-hour curriculum skill. The thermal-safety half belongs here. Work on towel-blotted hair, not a sopping scalp. Excess water plus high heat is how bubble hair forms: moisture inside the cortex flashes to steam and leaves vacuoles that look like bubbles under magnification and feel like straw in the hand.
Section the head. Use a concentrator to direct air along the cuticle for a smoother plane, or a diffuser to dry curl pattern without blasting it straight. A round brush creates bend; a paddle flattens. Keep the barrel moving. Rest the dryer on a stable, dry surface—not in the shampoo bowl, not on a damp towel, not hanging by the cord. Dry hands before you pick it up. Clean intake filters ; packed hair is fuel.
A cool shot at the end helps hydrogen bonds reset in the new shape. That is procedure, not a Board-mandated button-hold time. If the client has abrasions, a sunburned scalp, or metal ornaments that will heat, stop and reassess—thermal styling is still a service with contraindications (Chapter 8), not a mandatory add-on after every cut.
Curling irons, marcel irons, and flat irons
A curling iron uses a heated barrel, usually with a clamp , to form a curl or wave. Barrel diameter controls size: smaller barrel, tighter curl. Match the section to the barrel; a huge panel on a tiny rod bakes the outside and leaves the inside damp. Test heat on a white tissue or in the air away from the scalp before the first contact. If the tissue scorches, the iron is too hot for that hair.
A marcel iron is the professional waving iron with a grooved rod historically heated on a stove and today usually electric. Marcel waving builds S-shaped thermal waves similar in shape to finger waves but created with the iron, not with waving lotion. Balance the iron in its heater or rest so it cannot roll onto the patron. Do not park handles so close to a stove-style heater that you burn your hand retrieving them. Those are classic thermal-safety facts; New Jersey captures them under safe appliances rather than a Victorian stove statute.
A flat iron (straightener) uses paired plates to temporarily smooth. Hair should be dry unless the manufacturer designed that model for damp hair. One or two controlled passes beat six cooked passes. Product film on plates becomes a rough, unsanitizable crust— unplug , cool, then clean as the manufacturer allows. A peeling coating is 13:28-3.2(d) territory: if the surface cannot be sanitized, it is out of service.
Place a hard-rubber or other nonflammable comb between the iron and the scalp when you work close to the head. Metal combs heat and burn. Celluloid combs can ignite. That comb rule is standard thermal procedure and sits comfortably next to 13:28-3.1(f) . Never leave a hot iron on a cutting cape, a paper neck strip, or a stack of towels.
Thermal pressing
A pressing comb temporarily straightens curly or coiled hair by heat and pressing oil or cream. New Jersey teaches it on the Chemical Relaxing & Pressing hour line ( 90 hours), not as a footnote to the 45-hour curling line. Hair must be clean and completely dry . Oil on wet hair plus a hot comb is a scald.
Textbook procedure still uses three strengths, even though 13:28 does not print the percentages. A soft press applies the comb once on each side of the hair and removes a large share of the curl (commonly taught as about 50 to 60 percent —a teaching range, not a Board number). A medium press adds another pass. A hard press uses additional oil and more passes until the hair is almost fully smoothed. More heat and more passes mean more cuticle damage . Do not hard-press hair that is already chemically relaxed, bleached, or showing breakage. Do not press over scalp abrasions , open sores, or a prior burn.
Hold the comb so the back (not the teeth) does the smoothing on the strand, and keep a comb guard between the hot metal and the scalp. Pressing is temporary . Humidity and shampoo reverse it. Selling a press as a substitute for a hydroxide relaxer is a chemistry lie (Chapter 14) and a safety lie.
Loading diagram... Thermal tool safety path under N.J.A.C. 13:28-3.1(f)
Heat damage, burns, and electrical safety
Heat damage is protein and cuticle injury, not a fashion side effect. Signs include a rough, chalky feel, lost elasticity (hair stretches and does not rebound), split ends that race up the shaft, and bubble hair after water-plus-extreme-heat. Porous, lightened, or chemically relaxed hair reaches the damage zone at lower settings. If the hair smokes, smells burned, or changes color in the iron, you are past styling and into destruction. Stop. Do not “finish the other side” for symmetry.
Burns happen to the client (scalp, ears, neck, forehead) and to you (fingers, inner wrist). Causes: no comb between iron and scalp, iron rolling off a station, a clamp closing on an ear, a pressing comb held too long at the hairline, a dryer nozzle parked on one spot, a flat iron closed on a baby hair. First aid for a salon burn is cool water and medical referral when the skin blisters or the burn is large—do not pack butter or styling oil on it. Document the incident. N.J.A.C. 13:28 does not publish a burn-cream brand; it does require safe appliances and sanitary premises.
Electrical rules that belong on this page, not only in Chapter 9:
Keep the grounding pin intact. A cheater adapter as a permanent setup defeats the listing.
One healthy outlet per heavy load; daisy-chained strips under a wet station are how cords heat.
Unplug by the plug body . Turn the tool off before you plug or unplug it.
Never cool a hot iron in the shampoo bowl.
Never handle a dryer or iron with wet hands or while standing in a puddle. A C-H shop must have potable water and a shampoo setup ( 13:28-3.1(b) , 13:28-2.5 ), so wet services and hot tools share the room by design.
After the service, unplug , let the tool cool , then remove product film so the next heat cycle does not bake residue into a rough plate.
Marcel work adds a balance problem: a stove-heated or well-heated iron that is not seated will fall. That fall is both property damage and a burn. Electric marcel irons still need a rest .
Thermal styling on the New Jersey exam is therefore a three-layer answer: know which 13:28-6.29 hour line the tool belongs to , place the wave or press without cooking the cortex , and keep the appliance dry, listed, grounded, and off the client’s skin .