Study guide
14.2 Nozzle Selection and Droplet Size
New Jersey Commercial Pesticide Applicator Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility, Training, and PACER Pathway 1.3 License Types: Applicator, Operator, Private, Dealer, Business
2 Federal Pesticide Law
2.1 FIFRA, EPA Registration, and the Label as Law 2.2 Restricted-Use, General-Use, and Unclassified Products 2.3 WPS, ESA, FQPA, and DOT Transport
3 New Jersey Certification Framework
3.1 N.J.A.C. 7:30 and the Pesticide Control Act 3.2 Commercial Categories and Subcategories 3.3 CORE Course, 40-Hour OJT, and Minimum Applications
4 Records, Storage, and Supervision
4.1 Application Recordkeeping 4.2 Storage, Inventory, and Fire-Department Submittal 4.3 Supervising Operators and Noncertified Applicators
5 Notification, Posting, and School IPM
5.1 Household, Structural, and Community Notification 5.2 Turf and Ornamental Posting 5.3 School IPM Act and Category 13
6 Enforcement, Renewal, and Recertification
6.1 Penalties and Enforcement 6.2 Annual Renewal and Five-Year Recertification 6.3 Reciprocity, Lapsed Licenses, and Adding Categories
7 Label Comprehension
7.1 Label Format, Terminology, and Mandatory vs Advisory Language 7.2 Signal Words, Precautionary Statements, and Toxicity Categories 7.3 Directions for Use, REI, PHI, and Site/Pest Restrictions
8 Toxicity, Exposure, and First Aid
8.1 SDS vs Label and Product-Specific Notification 8.2 Acute vs Chronic Toxicity and Routes of Exposure 8.3 Poisoning Symptoms, First Aid, and Heat Stress
9 PPE and Safe Handling
9.1 Protective Clothing and Chemical-Resistant Materials 9.2 Respirators, Fit Testing, and Medical Evaluation 9.3 Mixing, Loading, Handling, and Child-Access Precautions
10 Pesticides in the Environment
10.1 Weather, Inversions, and Drift 10.2 Soil, Terrain, Drainage, and Groundwater 10.3 Fish, Wildlife, Bees, and Other Non-Targets
11 Pests and Integrated Pest Management
11.1 Pest Identification and Life Cycles 11.2 IPM Principles, Monitoring, and Thresholds 11.3 Resistance Management and Control Tactics
12 Pesticide Characteristics
12.1 Types of Pesticides and Modes of Action 12.2 Formulations, Adjuvants, Compatibility, and Persistence 12.3 Dilution Procedures and Measuring Concentrates
13 Application Equipment and Methods
13.1 Equipment Types, Advantages, and Limits 13.2 Selecting Application Methods and Extra Certifications 13.3 Maintenance, Inspection, and Preventing Misuse
14 Calibration and Drift Reduction
14.1 GPA, GPM, and Swath Math 14.2 Nozzle Selection and Droplet Size 14.3 Worked Calibration Examples
15 Containers, Spills, and Professionalism
15.1 Container Handling, Triple Rinse, and Disposal 15.2 Spills, Emergency Response, and Chemical Security 15.3 Customer Communication, Stewardship, and Professionalism
16 Category Landscape: Agriculture, Landscape, Structural
16.1 Agricultural, Forest, and Seed Categories 16.2 Landscape, Turf, and Vegetation Management 16.3 Structural, Household, Termite, and Fumigation
17 Category Landscape: Public Health and Special
17.1 Public Health, Mosquito, and Related Categories 17.2 Demonstration, Aerial, Antimicrobial, and School IPM 17.3 When Extra Certification Is Required
18 Exam Strategy and Integrated Scenarios
18.1 Exam-Day Rules and Closed-Book Strategy 18.2 Worked New Jersey Scenarios 18.3 Final Review Checklist
14.2 Nozzle Selection and Droplet Size
Key Takeaways Explain This Topic AI
Labels that require a stated ASABE spray quality (for example medium or coarser) make that droplet category mandatory; a finer tip for “better coverage” is then a N.J.A.C. 7:30-10.2(a) misuse and a foreseeable-drift problem under 10.2(f).
ASABE S572 classes run Extra Fine (XF) through Ultra Coarse (UC). Finer classes stay aloft longer and raise particle-drift risk; coarser classes cut particle drift but can reduce coverage of small targets.
Flow is proportional to the square root of pressure, not to pressure itself. Doubling 40 psi to 80 psi multiplies GPM by about 1.41, not by 2; quadrupling pressure is what would double flow, and that is usually outside the nozzle’s rated range.
Nozzle charts pair orifice size, pressure, GPM, and spray quality. ISO color codes (yellow 02, blue 03, red 04, brown 05) identify flow at a reference pressure, usually 40 psi for standard flat fans — they are not GPA and they are not New Jersey legal categories.
Category 11 aerial work still uses nozzle charts: 40 CFR 171.103(d)(15) requires interpreting flow-rate charts, placing nozzles to manage vortices, and selecting tips that produce the labeled droplet size; N.J.A.C. 7:30-10.6(d) then requires manufacturer-spec calibration of that setup.
Last updated: August 2026
Quick Answer: Pick the orifice for the GPM the 5940 formula needs, then pick the nozzle type and pressure for the droplet spectrum the label names. ASABE classes run XF → VF → F → M → C → VC → XC → UC . Flow ∝ √pressure — doubling psi does not double GPM. A label that says medium or coarser is mandatory under N.J.A.C. 7:30-10.2(a) . Finer spray is a particle-drift setup under 10.2(f) .
40 CFR 171.103(c)(6)(ii) is calibration and the use of the equipment you calibrated. 40 CFR 171.103(c)(7)(iv) is prevention of drift and pesticide loss . The controllable hardware for particle drift is the nozzle , the pressure , and the boom height . Vapor drift is a formulation and temperature problem; a coarser tip will not stop a volatile ester from leaving a hot parking lot. Chapter 10 already covered inversions. This section is the chart, the square-root law, and the New Jersey duty to use the spectrum the label printed.
ASABE droplet categories (XF through UC)
The American Society of Agricultural and Biological Engineers (ASABE) S572 standard classifies spray quality by comparison with reference nozzles , not by a single micrometer number you must memorize for PACER. Manufacturer charts print the class at each pressure. Learn the order and what it means in the field:
- ASABE class (finest → coarsest) Particle-drift tendency Typical Core use
- XF Extra Fine Highest Rare outdoor; some indoor mists
- VF Very Fine Very high Generally avoid outdoors near sensitive sites
- F Fine High Some contact insecticides when the label allows
- M Medium Moderate Many foliar insecticides and fungicides
- C Coarse Lower Many systemic herbicides; boom work near neighbors
- VC Very Coarse Low Drift-reduction herbicide setups
- XC Extra Coarse Very low Labeled drift-reduction / buffer work
UC Ultra Coarse Lowest particle drift; coverage of tiny targets can suffer Some herbicide labels and air-induction setups
Volume median diameter (VMD or Dv0.5) is the droplet diameter that splits the spray volume in half: half the volume is in smaller drops, half in larger. Charts may list VMD, but the legal language on modern labels is usually the ASABE class . If the Directions for Use say apply as a medium or coarser spray, Fine is illegal even if your GPA is perfect. That sentence is mandatory labeling, not a suggestion. N.J.A.C. 7:30-10.2(a) incorporates it. 10.2(e) reasonable precautions and 10.2(f) foreseeable nontarget deposit still apply if you chose Fine next to a school playground on a 12-mile-per-hour wind.
Finer droplets: more drops per gallon, better coverage of small insects or leaf undersides, longer hang time , more evaporation in New Jersey summer heat, more particle drift . Coarser droplets: less drift, fewer drops, possible skipping on a dense canopy if you do not raise volume or slow down. Coverage problems are fixed with GPA, angle, and boom height , not by violating a coarse-spray mandate.
Reading a nozzle chart
A chart row is a tip ; columns are pressures . Each cell is GPM and often a spray-quality letter . Standard flat-fan tips are commonly rated at 40 psi . Air-induction (venturi) tips are often rated at 40–80 psi and produce a coarser class at the same orifice because they mix air into the drop.
ISO 10625 color codes (industry convention, not a New Jersey statute) at the usual 40 psi flat-fan reference:
- Color Orifice Approx. GPM at 40 psi
- Orange 01 0.10
- Green 015 0.15
- Yellow 02 0.20
- Blue 03 0.30
- Red 04 0.40
- Brown 05 0.50
- Gray 06 0.60
- White 08 0.80
A red 04 is 0.40 GPM at 40 psi , which is the nozzle behind the 19.8 GPA example in 14.1. It is not “0.40 GPA.” It is not legal just because it is red. Match orifice + pressure + type to the GPM you calculated and to the ASABE class on the label.
Spray angle (80° vs 110°) changes the boom height needed for overlap. A 110° fan can run lower , which shortens drop flight time and cuts drift. Too low, and you get stripes; too high, and the pattern thins and drifts. Tapered flat fans overlap about 30–100 percent on a broadcast boom. Even (E) fans are for banded work without overlap. Hollow cones make a large Fine fraction — a poor default for outdoor herbicides next to a nontarget. Flood tips are coarser and common on turf booms. Air-induction tips are the usual way to stay Coarse to Ultra Coarse without starving GPM.
Worn orifices over-apply . A 04 that should be 0.40 GPM and measures 0.48 GPM is a 20 percent over-application at the same speed. Industry practice is to replace when output is about 10 percent over the chart; that 10 percent is not a number printed in N.J.A.C. 7:30. 9.9(a) still requires proper maintenance , and 9.9(b) still requires the equipment you use to be calibrated . A lying gauge is a 9.9(a) problem: you cannot know pressure, class, or GPM.
- Pressure versus flow: the square-root law
- GPM₂ = GPM₁ × √(PSI₂ / PSI₁)
Flow is not proportional to pressure. It is proportional to the square root of pressure.
Doubling pressure does not double flow. √2 ≈ 1.41 . A 0.40 GPM tip at 40 psi becomes about 0.56 GPM at 80 psi — a 41 percent increase, not 100 percent. GPA at 6 MPH and 20-inch spacing goes from 19.8 to about 28 GPA , not 40 GPA. If you needed to double output you would need four times the pressure (40 psi → 160 psi), which is outside most fan ratings, shreds droplets toward Fine/Very Fine , and is not a calibration method.
Worked square-root checks:
0.40 GPM at 40 psi → 0.50 GPM : 0.50 / 0.40 = 1.25 = √(P / 40) → P / 40 = 1.5625 → P = 62.5 psi . Then re-read the chart for ASABE class at 62 psi. Many 04 extended-range tips move from Coarse toward Medium as pressure rises.
0.40 GPM at 40 psi → 20 psi : √(20/40) = √0.5 ≈ 0.707 → 0.28 GPM . Pattern may collapse (striping) even if the class looks coarser. Stay inside the manufacturer’s pressure band.
Use pressure as a fine trim after the orifice is in the right family. Use orifice size and speed for large GPA changes. Use nozzle type (standard vs air-induction) for droplet class . Using pressure as the only knob is how a 3B crew in Burlington “fixes” coverage by creating a Fine mist that 10.2(f) will treat as foreseeable drift onto the next patio.
Boom height, overlap, and New Jersey 10.2
Lower boom (within the angle’s overlap window) = less hang time = less particle drift. Bounce at high speed raises the effective height even if the gauge says 20 inches. 10.2(e) reasonable precautions include setting height, pressure, and class so off-target movement is not reasonably foreseeable. 10.2(d) still forbids directly spraying a nontarget. A nozzle that streaks onto the sidewalk is not “drift philosophy”; it is a direct deposit.
Drift-reduction adjuvants can help when the label allows them. They do not legalize a Fine spectrum the label forbids, an inversion, or wind above the labeled maximum.
Category 11 awareness (aerial nozzles)
40 CFR 171.103(c)(7)(ii) requires extra certification for aerial application. New Jersey Category 11 is that extra exam, taken with Core and a related use category. 40 CFR 171.103(d)(15) — the federal aerial standard — still belongs on Core radar because the same physics appears in the Core equipment items:
Inspect the system before the load.
Interpret a nozzle flow-rate chart.
Determine how many nozzles you need from flow, aircraft speed , and swath width .
Place nozzles to compensate for wingtip vortices , rotor wash, and propeller turbulence.
Place nozzles to produce the labeled droplet size .
Verify flow with timing, a known distance, or a flow meter.
N.J.A.C. 7:30-10.6(d) then requires that aerial equipment be properly calibrated to the manufacturer’s specification for the specific type of application , with proof kept by the aerial pesticide applicator business . Section 14.3 works that proof rule. For this section: an aerial “fine mist for coverage” that the product label forbids is the same 10.2(a) mistake as on a turf boom, with a larger swath.
Worked New Jersey scenarios
Scenario D — Fine on a coarse label. A 3B herbicide in Middlesex County says “apply as a coarse or coarser spray.” The crew installs standard 04s and runs 70 psi to “push through” the thatch. The chart at 70 psi is Medium or Fine . GPA may still be near 20. The spectrum is still a label violation and a 10.2(f) drift setup next to vegetable gardens.
Scenario E — doubling psi to double GPA. A 6B operator at 20 GPA wants 40 GPA, so he doubles 40 psi to 80 psi and leaves the 04s in. Flow becomes 0.56 GPM , GPA about 28 , droplets finer. He did not double GPA. He created a different, illegal-if-labeled-coarse application. Larger orifices or slower MPH are the tools.
Scenario F — color as GPA. An operator says “we always spray red, that’s 4 gallons.” Red 04 is 0.40 GPM at 40 psi . At 6 MPH / 20-inch it is 20 GPA . At 10 MPH it is 12 GPA . Color is an orifice reminder, not a rate.
High-yield traps
Doubling pressure ≠ doubling flow; flow ∝ √pressure .
ASABE class on the label is mandatory language.
XF–F raise particle drift; they do not cause vapor drift.
ISO color is GPM at a reference psi , not GPA.
Worn tips over-apply; a bad gauge falsifies every chart cell.
- Official resources
- 40 CFR 171.103(c)(6)–(7) and (d)(15)
- N.J.A.C. 7:30-10.2 pesticide use
- N.J.A.C. 7:30-10.6 aerial application
- N.J.A.C. 7:30-9.9 application and safety equipment
Loading diagram... Nozzle selection: GPM from the formula, ASABE class from the chart, square-root pressure law