Study guide

10.1 Weather, Inversions, and Drift

New Jersey Commercial Pesticide Applicator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Eligibility, Training, and PACER Pathway 1.3 License Types: Applicator, Operator, Private, Dealer, Business

2 Federal Pesticide Law

2.1 FIFRA, EPA Registration, and the Label as Law 2.2 Restricted-Use, General-Use, and Unclassified Products 2.3 WPS, ESA, FQPA, and DOT Transport

3 New Jersey Certification Framework

3.1 N.J.A.C. 7:30 and the Pesticide Control Act 3.2 Commercial Categories and Subcategories 3.3 CORE Course, 40-Hour OJT, and Minimum Applications

4 Records, Storage, and Supervision

4.1 Application Recordkeeping 4.2 Storage, Inventory, and Fire-Department Submittal 4.3 Supervising Operators and Noncertified Applicators

5 Notification, Posting, and School IPM

5.1 Household, Structural, and Community Notification 5.2 Turf and Ornamental Posting 5.3 School IPM Act and Category 13

6 Enforcement, Renewal, and Recertification

6.1 Penalties and Enforcement 6.2 Annual Renewal and Five-Year Recertification 6.3 Reciprocity, Lapsed Licenses, and Adding Categories

7 Label Comprehension

7.1 Label Format, Terminology, and Mandatory vs Advisory Language 7.2 Signal Words, Precautionary Statements, and Toxicity Categories 7.3 Directions for Use, REI, PHI, and Site/Pest Restrictions

8 Toxicity, Exposure, and First Aid

8.1 SDS vs Label and Product-Specific Notification 8.2 Acute vs Chronic Toxicity and Routes of Exposure 8.3 Poisoning Symptoms, First Aid, and Heat Stress

9 PPE and Safe Handling

9.1 Protective Clothing and Chemical-Resistant Materials 9.2 Respirators, Fit Testing, and Medical Evaluation 9.3 Mixing, Loading, Handling, and Child-Access Precautions

10 Pesticides in the Environment

10.1 Weather, Inversions, and Drift 10.2 Soil, Terrain, Drainage, and Groundwater 10.3 Fish, Wildlife, Bees, and Other Non-Targets

11 Pests and Integrated Pest Management

11.1 Pest Identification and Life Cycles 11.2 IPM Principles, Monitoring, and Thresholds 11.3 Resistance Management and Control Tactics

12 Pesticide Characteristics

12.1 Types of Pesticides and Modes of Action 12.2 Formulations, Adjuvants, Compatibility, and Persistence 12.3 Dilution Procedures and Measuring Concentrates

13 Application Equipment and Methods

13.1 Equipment Types, Advantages, and Limits 13.2 Selecting Application Methods and Extra Certifications 13.3 Maintenance, Inspection, and Preventing Misuse

14 Calibration and Drift Reduction

14.1 GPA, GPM, and Swath Math 14.2 Nozzle Selection and Droplet Size 14.3 Worked Calibration Examples

15 Containers, Spills, and Professionalism

15.1 Container Handling, Triple Rinse, and Disposal 15.2 Spills, Emergency Response, and Chemical Security 15.3 Customer Communication, Stewardship, and Professionalism

16 Category Landscape: Agriculture, Landscape, Structural

16.1 Agricultural, Forest, and Seed Categories 16.2 Landscape, Turf, and Vegetation Management 16.3 Structural, Household, Termite, and Fumigation

17 Category Landscape: Public Health and Special

17.1 Public Health, Mosquito, and Related Categories 17.2 Demonstration, Aerial, Antimicrobial, and School IPM 17.3 When Extra Certification Is Required

18 Exam Strategy and Integrated Scenarios

18.1 Exam-Day Rules and Closed-Book Strategy 18.2 Worked New Jersey Scenarios 18.3 Final Review Checklist

10.1 Weather, Inversions, and Drift

Key Takeaways Explain This Topic AI

40 CFR 171.103(c)(3)(i) and (c)(7)(iv) require Core knowledge of weather and indoor/outdoor climate plus prevention of drift and pesticide loss into the environment.

Particle drift is off-target movement of droplets, dusts, or other particles during or just after application; vapor drift is movement of the pesticide as a gas, often after it has already landed, and a coarser nozzle does not stop it.

A temperature inversion traps fine droplets and vapors in a stable cool layer near the ground so they can travel as a concentrated cloud; hanging smoke, ground fog, and a still dawn are stop signs.

N.J.A.C. 7:30-10.2(e) requires reasonable precautions before, during, and after the application, including transmitting relevant label precautions to people who may be exposed.

N.J.A.C. 7:30-10.2(f) forbids permitting drift or other movement onto a nontarget site when that infringement should be reasonably foreseeable; NJDEP does not have to prove the applicator intended the deposit.

Last updated: August 2026

Quick Answer: Particle drift is spray droplets or dust leaving the target during or just after application. Vapor drift is the pesticide moving later as a gas . Temperature inversions and the wrong wind make both worse. N.J.A.C. 7:30-10.2(e) requires reasonable precautions before, during, and after the job. N.J.A.C. 7:30-10.2(f) forbids reasonably foreseeable drift or other movement onto a nontarget site .

40 CFR 171.103(c)(3) is the federal Core environment standard. Commercial applicators must know the potential environmental consequences of pesticide use and misuse, including the influence of weather and other indoor and outdoor climatic conditions . 40 CFR 171.103(c)(7)(iv) is the matching application-methods competency: prevention of drift and pesticide loss into the environment . New Jersey does not leave those sentences as theory. N.J.A.C. 7:30-10.2(a) already makes the label the law. N.J.A.C. 7:30-10.2(d) forbids directly applying any pesticide to a nontarget site. N.J.A.C. 7:30-10.2(e) requires reasonable precautions, before, during, and after the application, to minimize exposure of individuals or the environment — and those precautions expressly include transmitting precautionary label statements to people who are exposed or may be exposed. N.J.A.C. 7:30-10.2(f) then forbids permitting drift or other movement of the pesticide to infringe on a nontarget site under circumstances where such infringement should be reasonably foreseeable . On the closed-book Core, those citations work as a set: federal law names the science; New Jersey names the duty.

Particle drift versus vapor drift

Drift is off-target movement of pesticide through the air . Core items split it into two mechanisms that can look the same on a neighbor’s tomatoes and are not the same in the tank or the weather.

Particle drift (spray drift or droplet drift) is physical movement of spray droplets, dusts, granules, or other particles off the target during or immediately after application. The material is still a liquid droplet or a solid particle. Wind, droplet size , boom height, pressure, and forward speed control it. A Category 3B crew that sprays a fairway with a fine mist in a 15-mile-per-hour southwest wind is creating particle drift. An airblast orchard sprayer that blows past the last row into a parking lot is creating particle drift. A dust formulation that leaves a visible plume is particle drift.

Vapor drift is movement of pesticide as a gas after the product leaves the nozzle — often after it has already landed . Volatility is a property of the active ingredient and the formulation , not of the nozzle. High vapor pressure, high temperature, and low humidity favor vapor movement. Phenoxy herbicides such as 2,4-D ester formulations are classic vapor-drift examples; amine salt formulations of the same active ingredient are less volatile. A turf crew can apply a volatile ester on a calm, labeled morning, leave a legally treated lawn, and still injure tomatoes two lots away that afternoon when pavement heats and the ester volatilizes. Switching to a coarser nozzle does not stop vapor drift. Formulation choice, temperature caps on the label, and not applying before a heat spike do.

Do not confuse either form of aerial drift with runoff (overland flow of water carrying pesticide) or leaching (downward movement through soil). Those belong with soil and drainage. Do not confuse them with direct nontarget application under 10.2(d) — driving the boom over the neighbor’s bed is not drift; it is a direct application to a nontarget site.

Indoor climate is part of the same federal competency. Aerosol, fog, and space-spray applications in attached structures or buildings that share HVAC can move pesticide into untreated rooms. That is indoor movement of particles or vapor. New Jersey’s household and structural notice rules treat adjoining occupants of attached structures and shared HVAC as needing notice; the physics is the same: air currents carry pesticide past the target.

  • Weather that drives off-target movement
  • Wind

Wind speed and direction at nozzle height matter more than a downtown forecast. A 10-mile-per-hour wind at 30 feet can be a 4-mile-per-hour wind at boom height, or the reverse in a corridor between buildings. Measure on site with a handheld anemometer; do not guess from a phone app that reports airport conditions.

Many labels prohibit application above a stated wind speed (commonly 10 or 15 miles per hour) or below a minimum. Dead calm is not automatically safe. Calm air is when temperature inversions form. Core teaching typically treats a light, steady breeze — often in the 3 to 10 mile-per-hour range when the label allows it — as more predictable than either a gusty 18-mile-per-hour afternoon or a still, foggy dawn. Gusts change direction between passes. A Category 6B right-of-way crew spraying along a highway with trucks creating their own turbulence is not in “steady wind.”

Wind direction decides who is the nontarget. Spray so that the treated swath is upwind of sensitive sites when you can: schools, organic farms, beehives, surface water, greenhouses, and vegetable gardens. 10.2(f) uses a reasonably foreseeable test. If a school playground is immediately downwind and you spray a fine-droplet herbicide in 12-mile-per-hour wind, infringement on that playground is reasonably foreseeable even if you never intended it.

Temperature inversions

A temperature inversion exists when a layer of cooler air is trapped near the ground under warmer air. The normal daytime pattern is the opposite: air cools with height, turbulence mixes the lower atmosphere, and droplets either deposit or dilute. In an inversion, the cool surface layer is stable . Fine droplets and vapors suspend in that layer and can move as a concentrated cloud horizontally for long distances with almost no wind.

Recognize inversions before you spray:

  • Ground fog, or smoke that layers, flattens, or hangs instead of rising and breaking up
  • Dew, frost, or a clear, calm night followed by a still dawn
  • Little or no wind at ground level while clouds move higher up

A thermometer showing the air at 3 to 4 feet cooler than the air at 8 to 10 feet (temperature increasing with height)

Inversions are common in New Jersey on clear nights and early mornings, in valleys (the Delaware and Raritan drainages, Pinelands basins), over wet turf, and over pavement that cooled overnight. They often break after the sun heats the surface and mixing resumes — frequently mid-morning, not at 6:00 a.m. just because the crew likes an early start. Do not apply when an inversion exists if the label forbids it, and treat an inversion as a 10.2(e) failure of reasonable precautions even when the label is silent, because horizontal movement of a concentrated cloud onto a nontarget site is reasonably foreseeable under 10.2(f) .

Soil-fumigant and aerial labels are especially strict about inversions. Core still tests the concept for every category because 171.103(c)(3)(i) and (c)(7)(iv) apply to all commercial applicators.

Temperature, humidity, and evaporation

High temperature and low relative humidity shrink droplets after they leave the nozzle (evaporation), turning a medium droplet into a fine one in flight. That increases particle-drift potential and, for volatile actives, vapor-drift potential. A 90°F, 30-percent-humidity July afternoon on the Coastal Plain is a different application than a 68°F, 70-percent-humidity May morning in the Highlands — even at the same wind speed and nozzle. Some labels cap application temperature for volatile herbicides. Exceeding that cap is a label violation under 10.2(a) as well as a drift setup.

Rain and irrigation shortly after application can wash residues into runoff or, on sand, toward groundwater. That is not aerial drift, but it is pesticide loss into the environment under (c)(7)(iv) . Check the label’s rainfast interval.

Droplet size, nozzles, and boom height

Droplet size is the dominant controllable factor for particle drift. Smaller droplets stay aloft longer. ASABE S572 classifies spray quality from extra fine through ultra coarse. Labels that specify a droplet spectrum (for example “apply as a medium or coarser spray”) make that spectrum mandatory . Using a finer nozzle to “get better coverage” is then a use inconsistent with labeling.

Spray quality (typical ASABE class) Particle-drift tendency Typical use

Very fine / fine High — droplets remain airborne Some contact insecticides and indoor mists; rarely appropriate outdoors near sensitive sites

  • Medium Moderate Many foliar insecticides and fungicides when the label allows
  • Coarse / very coarse Lower particle drift Systemic herbicides; many boom applications near sensitive sites

Extra / ultra coarse Lowest particle drift; may reduce coverage of small targets Drift-reduction setups and some herbicide labels

Higher pressure generally makes smaller droplets. Lower boom height shortens the time droplets are in the air. Forward speed that is too high to keep boom height stable creates bounce and uneven deposit. Airblast and aerial equipment produce a large fraction of fine droplets and have extra New Jersey overlay (aerial certification; gypsy-moth commuting buffers in 10.2(k) ). Drift-reduction adjuvants can help when the label allows them; they do not legalize spraying into an inversion or into wind the label forbids.

Vapor drift is not fixed by switching from a fine to a coarse nozzle. If the product can volatilize, choose a lower-volatility formulation, obey temperature limits, and do not apply to hot pavement or drought-stressed turf just before an afternoon heat spike.

New Jersey 10.2(e) and 10.2(f)

10.2(e) is broader than “don’t spray in the wind.” Reasonable precautions before, during, and after the application include:

Reading the label at the mix/load site ( 10.2(i) requires a readable copy of the registered label at the application or mixing site)

Checking wind, inversion signs, and sensitive downwind sites

Selecting nozzle, pressure, boom height, and buffer distance that make off-target movement not reasonably foreseeable

Transmitting precautionary label statements to exposed or potentially exposed people — the rule expressly includes that transmittal

After application, not leaving a running hose in a tank, not driving a dripping boom down a public street, and not blowing leftover tank mix into a ditch

10.2(f) does not require NJDEP to prove that a neighbor was injured. It requires that you not permit drift or other movement onto a nontarget site when that infringement should be reasonably foreseeable . “I didn’t see it leave the property” is not a defense if a competent applicator would have foreseen it. “Other movement” covers more than airborne droplets: vapor, dust, granules bouncing off pavement, and spray that hits a parked car and is driven off-site.

10.2(c) separately forbids applying pesticides in a manner that causes harm, injury, or damage to persons, property, or the environment, or a significant risk of that harm. You can violate the risk prong before anyone files a complaint. Buffers on the label (for example, do not apply within a stated distance of aquatic habitat) are mandatory. Extra buffers you add when a school, organic farm, or beehive is downwind are part of 10.2(e) .

Worked New Jersey scenarios

Scenario A — inversion at dawn. A Category 3A ornamental crew arrives at a corporate campus in Morris County at 5:45 a.m. Parking-lot lights show a flat smoke layer from a nearby chimney. Wind is calm. They want to finish before employees arrive. An inversion is present. Applying a foliar insecticide as a fine spray would leave droplets suspended over the lot and the adjacent playground. 10.2(e) and 10.2(f) are not met. Wait until mixing resumes.

Scenario B — ester on a hot afternoon. A 3B applicator uses a 2,4-D ester on a Burlington County lawn at 2:00 p.m. at 92°F, with tomatoes in the next yard. Wind is 4 miles per hour. Particle drift looks manageable. Vapor drift is still reasonably foreseeable. Choose a lower-volatility formulation or a different day.

Scenario C — “the label didn’t mention the neighbor.” A 6A vegetation-management spray along a county road sends visible mist onto a farmstand parking lot. The product label is silent about farmstands. 10.2(d) and 10.2(f) still apply. Direct deposit on the lot is a nontarget application; if it was spray that left the swath in foreseeable wind, it is also drift.

High-yield traps

Particle drift ≠ vapor drift; nozzles fix the first, not the second.

Calm air can be an inversion, not a free pass.

10.2(f) is a foreseeability test, not an injury-proof test.

Indoor HVAC and fogging move pesticide just as outdoor wind does.

  • Official resources
  • 40 CFR 171.103 commercial applicator standards
  • N.J.A.C. 7:30-10.2 pesticide use and/or application

Loading diagram... New Jersey drift decision: inversion, wind, particle vs vapor, 10.2(f)