Study guide

13.2 Part One (Workers Comp) and Part Two (Employers Liability)

New Jersey Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

3 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

4 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

5 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

6 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

7 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

8 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D - Coverage for Damage to Your Auto 7.2 Exclusions and Part E - Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

9 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

10 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

11 National Portion: Commercial General Liability - Coverages

CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments

12 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

13 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

14 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

15 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

16 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

17 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

18 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

19 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

20 Introduction: New Jersey Property & Casualty Insurance Exam Overview

New Jersey Property & Casualty Exam Overview

21 Chapter 1: New Jersey P&C Insurance Regulation & Licensing

1.1 Department of Banking and Insurance (DOBI) 1.2 New Jersey P&C Producer Licensing Requirements 1.3 License Maintenance and Continuing Education

22 Chapter 2: New Jersey Property Insurance Laws

2.1 New Jersey Homeowners Insurance Requirements 2.2 New Jersey Commercial Property Insurance

23 Chapter 3: New Jersey Casualty Insurance Laws

3.1 New Jersey Auto Insurance Requirements 3.2 New Jersey General Liability Insurance 3.3 New Jersey Workers' Compensation Insurance

24 Chapter 4: New Jersey P&C Insurance Ethics & Prohibited Practices

4.1 Unfair Trade Practices 4.2 Producer Conduct and Responsibilities 4.3 New Jersey Property-Liability Insurance Guaranty Association (NJPLIGA)

13.2 Part One (Workers Comp) and Part Two (Employers Liability)

Key Takeaways Explain This Topic AI

The standard form is the NCCI Workers Compensation and Employers Liability Policy (WC 00 00 00 C) with Part One and Part Two.

Part One pays statutory benefits to the worker with NO dollar limit, only for states listed in Item 3.A.

Part Two covers employer liability the statute did not bar (third-party-over, consortium, consequential injury) and HAS three dollar limits in Item 3.B.

The three Part Two limits are BI by Accident (each accident), BI by Disease (aggregate), and BI by Disease (each employee).

Exam trap: statutory benefit to employee = Part One; lawsuit/liability not barred by exclusive remedy = Part Two.

Last updated: June 2026

The Standard Policy: Two Insuring Agreements

The national exam tests the Workers Compensation and Employers Liability Insurance Policy (the NCCI standard form, edition WC 00 00 00 C). Its core is two distinct insuring agreements: Part One — Workers Compensation and Part Two — Employers Liability . Knowing what each does, and the gap between them, is the single most tested WC concept.

Part One — Workers Compensation

Part One says the insurer will pay promptly when due the benefits required of the insured by the workers compensation law . Key features:

No dollar limit — the insurer pays whatever the statute requires.

It applies only to the states listed in Item 3.A. of the Information Page.

The insurer pays first and then may seek reimbursement from the employer only for benefits the employer is legally required to provide but which exceed policy terms (rare).

Part Two — Employers Liability

Part Two covers the employer's liability for bodily injury by accident or disease that is not covered by the workers comp statute but for which the employer can still be sued. It fills the gaps where exclusive remedy does not bar a suit. Classic gap claims include:

Third-party-over actions — an injured worker sues a third party (e.g., a machine maker), who then sues the employer for contribution

  • Consequential bodily injury — injury to a family member flowing from the worker's injury
  • Dual-capacity suits and loss of consortium claims by a spouse

Part Two Limits — The Three Limits

Unlike Part One, Part Two has dollar limits , shown in Item 3.B. of the Information Page. There are three:

  • Limit Applies to
  • Bodily Injury by Accident Each accident (all employees in one accident)
  • Bodily Injury by Disease Aggregate (policy total for all disease claims)
  • Bodily Injury by Disease Each employee

A common written set is $100,000 / $500,000 / $100,000 . Note: the By Accident limit is per accident (not per person), while the By Disease aggregate is the most the insurer pays for all disease claims during the policy period.

Worked Numeric — Applying the Three Limits

Limits are $100,000 each accident / $500,000 disease aggregate / $100,000 disease each employee .

Scenario A: A scaffold collapse injures 4 employees in one accident, and the employer is found liable to a third party for $300,000 total. The By Accident limit applies per accident, so the insurer pays only $100,000 for that single accident — regardless of how many employees were hurt.

Scenario B: Six employees develop an occupational disease; each has a $90,000 covered claim ($540,000 total). Each is within the $100,000 each employee limit, but the $500,000 disease aggregate caps total disease payments at $500,000 .

Trap: Part One vs. Part Two

The most common exam trap is confusing the two parts. Remember:

Part One = unlimited, statutory benefits to the worker.

Part Two = limited (3 limits), pays a liability judgment to a third party or for a non-statutory suit.

If the question describes a benefit required by law and paid to the employee , it is Part One. If it describes a lawsuit or liability the statute did not bar, it is Part Two.

The Information Page

The NCCI standard policy has no traditional declarations page; instead it uses the Information Page , whose items the exam references directly. Item 1 names the insured and entity type; Item 2 sets the policy period; Item 3.A. lists the states where Part One statutory coverage applies now; Item 3.B. shows the three Part Two Employers Liability limits; Item 3.C. lists Other States coverage; and Item 4 identifies the classifications, rates, and estimated premium.

Knowing that 3.A. equals current statutory coverage and 3.C. equals standby coverage for states entered mid-term is essential, because a worker injured in a state listed in neither item creates an uncovered gap.

How the Two Parts Work Together

In most claims only Part One responds: the worker is hurt, exclusive remedy bars a tort suit, and the insurer pays unlimited statutory benefits. Part Two activates only when a lawsuit slips past exclusive remedy - a third-party-over action, a consortium claim by a spouse, or a dual-capacity suit.

Because Part Two pays a judgment rather than statutory benefits, it carries dollar limits while Part One does not. A single event can trigger both: the injured employee collects Part One benefits, and if a machine maker the employee sued turns around and sues the employer for contribution, Part Two responds to that liability up to its By Accident limit.

Who Is an Employee

Coverage turns on employment status, so the exam tests the employee versus independent contractor distinction. Statutory and right-to-control tests examine who directs the work, supplies tools, sets hours, and pays wages. Misclassifying a true employee as a contractor exposes the employer to uninsured statutory liability, while genuine independent contractors generally must carry their own coverage.

Borrowed-servant and leased-employee situations add complexity that endorsements and the alternate-employer endorsement address. When a staffing agency leases workers to a client, the alternate-employer endorsement extends the agency's coverage to protect the client as if it were the insured for those leased workers.