Study guide
1.3 Legal Descriptions and Surveys
New Jersey Real Estate Salesperson Exam
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: New Jersey Real Estate Exam Overview
New Jersey Real Estate Exam Overview
3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use
1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances
4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title
2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording
5 National Portion: Chapter 3: Property Value & Appraisal
3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs
6 National Portion: Chapter 4: Real Estate Contracts & Agency
4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure
7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)
5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management
8 National Portion: Chapter 6: Property Disclosures & Environmental Issues
6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability
9 National Portion: Chapter 7: Financing & Settlement
7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations
10 National Portion: Chapter 8: Real Estate Math Calculations
8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math
11 Chapter 1: New Jersey Real Estate Commission & Licensing
1.1 New Jersey Real Estate Commission (NJREC) Overview 1.2 New Jersey License Requirements 1.3 New Jersey License Types and Broker Supervision 1.4 License Maintenance and Renewal
12 Chapter 2: New Jersey Agency Law
2.1 New Jersey Agency Relationships Overview 2.2 Dual Agency and Transaction Brokerage 2.3 Agency Disclosure Requirements and Forms 2.4 Commission and Compensation Rules
13 Chapter 3: New Jersey Contracts & Property Disclosures
3.1 New Jersey Purchase and Sale Agreements 3.2 New Jersey Seller Disclosure Requirements 3.3 Trust Account Management 3.4 New Jersey Closing Procedures
14 Chapter 4: New Jersey Property Law & Special Topics
4.1 New Jersey Fair Housing Laws 4.2 New Jersey License Law Violations and Discipline 4.3 New Jersey Property Rights and Ownership 4.4 Environmental Issues and Special Topics
1.3 Legal Descriptions and Surveys
Key Takeaways Explain This Topic AI
The three accepted legal-description methods are metes and bounds, rectangular (government) survey, and lot and block (recorded plat).
A metes-and-bounds description must close by returning to the point of beginning (POB).
In the rectangular survey system a township is 6 miles square and contains 36 sections; one section is 1 square mile = 640 acres.
Lot and block descriptions reference a recorded subdivision plat map and are common for residential subdivisions.
A street address is NOT a legal description because it does not precisely and permanently fix the boundaries.
Last updated: June 2026
What a Legal Description Must Do
A legal description identifies a parcel of land precisely enough that a surveyor could relocate its exact boundaries. A street address or tax-parcel number is convenient but is not a legal description, because addresses can change and do not fix boundaries.
There are three accepted methods, and a single deed may combine them. The method used often depends on the region: the original 13 colonies and Texas commonly use metes and bounds, while most western states use the rectangular survey.
Method 1: Metes and Bounds
Metes are distances; bounds are directions and boundaries. The description starts at a point of beginning (POB) , follows a series of courses (direction + distance), and must return to the POB so the parcel closes . Monuments (fixed markers such as an iron pin, a tree, or a road) anchor the description.
Trap: a metes-and-bounds description that does not return to the POB is defective because it fails to close, leaving an open boundary.
Method 2: Rectangular (Government) Survey System
The rectangular survey system (also called the government survey or PLSS ) uses principal meridians (north-south lines) and base lines (east-west lines) as reference axes.
Key math you must memorize:
- Unit Size
- Township 6 miles by 6 miles = 36 square miles
- Township contains 36 sections
- Section 1 mile by 1 mile = 1 square mile = 640 acres
- 1 acre 43,560 square feet
Townships are formed by horizontal township lines and vertical range lines . Sections within a township are numbered 1 to 36 in a boustrophedonic (back-and-forth) pattern, starting in the northeast corner.
Worked Acreage Example
To find the acreage of a fractional parcel, multiply the fractions and apply them to 640 acres.
Question: How many acres are in the NW 1/4 of the SE 1/4 of a section?
Step 1: Multiply the denominators: 4 x 4 = 16.
Step 2: Divide the section by that product: 640 / 16 = 40 acres .
Shortcut: read the description right to left, and each "quarter" divides by 4. Two quarters means 640 / 4 / 4 = 40 acres. A description like the S 1/2 of the NW 1/4 equals 640 / 4 = 160, then / 2 = 80 acres .
Method 3: Lot and Block (Recorded Plat)
The lot and block method (also called the recorded plat or subdivision method) refers to a numbered lot within a numbered block on a plat map that a developer has recorded with the county. A typical description reads: "Lot 7, Block 3, Sunrise Estates, as recorded in Plat Book 12, Page 45, of the county records."
This is the most common method for modern residential subdivisions because the recorded plat already contains the precise surveyed boundaries.
Two related survey concepts the exam tests:
Datum - a fixed reference point for measuring elevations and depths (used for condominium air-lot descriptions).
Benchmark - a permanent marker with a known elevation, used to reference the datum.
Reading the Section Grid
Within each 640-acre section, surveyors use compass-quarter language to subdivide. Visualize the section as a square and split it as the description directs, always working right to left .
- Fraction phrase Acres How to compute
- 1/4 section 160 640 / 4
- 1/2 of a 1/4 80 640 / 4 / 2
- 1/4 of a 1/4 40 640 / 4 / 4
- 1/4 of 1/4 of 1/4 10 640 / 4 / 4 / 4
A dollar-value twist: if the 40-acre parcel above sells for $6,000 per acre, the total is 40 x $6,000 = $240,000. The exam frequently chains an acreage calculation into a price calculation, so always finish the acreage step first.
Choosing the Right Method by Region
No single method is "best"; the correct method depends on history and geography:
- Method Where it dominates Best for
- Metes and bounds Original 13 colonies, Texas Irregular parcels, rural land
- Rectangular survey Most states west of the Appalachians Large, regular agricultural tracts
- Lot and block Nationwide Platted residential subdivisions
A single deed may combine methods - for example, using the rectangular survey to locate the section, then metes and bounds to carve out an irregular parcel within it. The exam may show a hybrid description and ask which method anchors the starting reference ; the answer is whichever method establishes the section or POB first.
Frontage, Correction Lines, and Air Rights
A few survey details show up as distractors:
Front foot - measures lot width along a street; a 60-foot-wide lot has 60 front feet, used to price commercial frontage.
Correction lines and guide meridians - the rectangular system inserts these every 24 miles to correct for the curvature of the earth, which is why range strips are not perfectly rectangular.
Air rights and subsurface rights - ownership of land includes the space above and the minerals below, and these rights can be sold separately (a developer may buy only the air rights over a rail yard).
Trap: when a question gives both a width and a depth, decide whether it wants square footage (width x depth) or front footage (width along the street only) - they are not the same.