Study guide
9.3 Mean, Median, Mode & Range
NLN NEX Mathematics Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the NLN NEX Mathematics Section 1.2 Study Strategy, Calculator Use & Test-Day Pacing
2 Numbers and Operations — Foundations
2.1 Place Value, Integers & Number Sense 2.2 Fractions: Concepts, Operations & Simplifying 2.3 Decimals: Place Value, Operations & Conversions
3 Numbers and Operations — Applications
3.1 Percents: Conversions & Applications 3.2 Ratios & Proportions 3.3 Order of Operations (PEMDAS)
4 Numbers and Operations — Exponents & Number Types
4.1 Exponents & Square Roots 4.2 Rational & Irrational Numbers
5 Measurement — Units
5.1 The Metric System 5.2 US Customary Units 5.3 Converting Between Metric & US Customary
6 Measurement — Applications
6.1 Dimensional Analysis 6.2 Dosage-Style Proportions 6.3 Temperature & Time Conversions
7 Measurement — Rates & Geometry
7.1 Rates & Speed/Distance/Time 7.2 Area & Perimeter 7.3 Volume & Surface Area
8 Algebra
8.1 Simplifying & Evaluating Expressions 8.2 Solving Linear Equations 8.3 Inequalities & Translating Word Problems 8.4 Slope & Coordinate Basics
9 Data and Information
9.1 Reading Tables & Graphs 9.2 Pie Charts & Percent of a Whole 9.3 Mean, Median, Mode & Range 9.4 Percent Change & Basic Probability 9.5 Comparing Two or More Data Sets
9.3 Mean, Median, Mode & Range
Key Takeaways Explain This Topic AI
The mean is the arithmetic average: sum of values ÷ number of values. It is sensitive to outliers — one extreme value can pull it far from the typical value.
The median is the middle value of an ordered list. For an even count, it is the average of the two middle values. The median is robust to outliers.
The mode is the most frequent value. A data set can have no mode, one mode, or multiple modes. The mode is the only average appropriate for categorical data (e.g., blood types).
The range is the maximum minus the minimum. It measures spread, not center, and is also sensitive to outliers.
Last updated: August 2026
The Four Measures
A list of numbers is hard to interpret on its own. Four statistics compress it into something a nurse or a test-taker can act on:
- Measure What it tells you How to compute it
- Mean The arithmetic center Sum ÷ count
- Median The middle value Order the data, take the center (or average of the two centers)
- Mode The most frequent value Count occurrences; the value(s) with the highest count
- Range The spread Maximum − Minimum
- Mean: The Arithmetic Average
The mean is the sum of all values divided by the number of values.
Worked Example: Systolic BP Readings
A patient's systolic BP over five readings: 118, 122, 130, 126, 114 mmHg.
Step 1: Sum: 118 + 122 + 130 + 126 + 114 = 610. Step 2: Count: 5 readings. Step 3: Divide: 610 ÷ 5 = 122 mmHg .
The mean systolic BP is 122 mmHg.
The Outlier Problem
Add a sixth reading of 190 mmHg (a possible cuff error or a hypertensive spike). New sum = 610 + 190 = 800. New count = 6. New mean = 800 ÷ 6 ≈ 133.3 mmHg .
One extreme reading pulled the mean up by more than 11 mmHg. This is why the mean is called sensitive to outliers . In nursing, a single outlier in a vital-signs series is often a measurement error, and reporting the mean uncritically would misrepresent the patient's typical state.
Median: The Middle Value
The median is the middle of an ordered list. It is robust — outliers do not move it much, because it depends on position, not on the size of every value.
Odd Count
Order the five original BP readings: 114, 118, 122, 126, 130. The middle value (third of five) is 122 mmHg . Here the mean and median agree.
Even Count — Average the Two Middle Values
Take six readings: 114, 118, 122, 126, 130, 190. With an even count, there is no single middle value. Take the two middle values — the third and fourth — and average them.
Step 1: The two middle values are 122 and 126. Step 2: Add and divide by 2: (122 + 126) ÷ 2 = 248 ÷ 2 = 124 mmHg .
Compare this to the mean with the outlier (133.3 mmHg). The median barely moved (122 → 124), while the mean jumped by 11. This is the classic reason to prefer the median for skewed data.
Quick Median Procedure
Sort the data from smallest to largest.
Count the values, n.
If n is odd, the median is the value at position (n + 1) ÷ 2.
If n is even, the median is the average of the values at positions n ÷ 2 and (n ÷ 2) + 1.
Mode: The Most Frequent Value
The mode is the value that appears most often. A data set can have:
No mode — every value appears exactly once.
One mode — one value appears more often than the others.
Two or more modes — two or more values tie for the highest frequency.
Worked Example: Heart Rates
Readings: 72, 80, 72, 88, 76, 80, 80.
Count each value: 72 appears 2 times, 80 appears 3 times, 76 appears 1 time, 88 appears 1 time. The mode is 80 bpm because it appears most often.
Why Mode Matters for Categorical Data
You cannot compute a mean or median for categories like blood type or admission reason — you cannot order them or average them. The mode is the only average that works. "The most common blood type among our patients is O+" is a mode statement.
Range: The Spread
The range is the simplest measure of spread: maximum − minimum.
Worked Example
BP readings: 114, 118, 122, 126, 130. Max = 130, min = 114. Range = 130 − 114 = 16 mmHg .
With the outlier 190 added: max = 190, min = 114. Range = 190 − 114 = 76 mmHg .
The range is also sensitive to outliers — one extreme value stretches it dramatically. Like the mean, treat the range with caution when the data has a clear outlier.
When to Use Which Measure
Situation Best measure Why
Symmetric data, no outliers Mean It uses every value and gives a stable center.
Skewed data or with outliers Median It is not pulled by extreme values.
Categorical data Mode Only the mode works for non-numeric categories.
Describing spread Range Quick, but pair it with a center measure.
A classic NEX scenario: a patient's temperatures are 98.6, 98.8, 99.0, 99.2, and 103.1. The mean (99.74 °F) suggests a fever, but four of five readings are below 99.5. The median (99.0 °F) better reflects the typical value, and the outlier (103.1) may be a spike or a measurement error worth rechecking rather than a true baseline.