Study guide
9.2 Pie Charts & Percent of a Whole
NLN NEX Mathematics Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the NLN NEX Mathematics Section 1.2 Study Strategy, Calculator Use & Test-Day Pacing
2 Numbers and Operations — Foundations
2.1 Place Value, Integers & Number Sense 2.2 Fractions: Concepts, Operations & Simplifying 2.3 Decimals: Place Value, Operations & Conversions
3 Numbers and Operations — Applications
3.1 Percents: Conversions & Applications 3.2 Ratios & Proportions 3.3 Order of Operations (PEMDAS)
4 Numbers and Operations — Exponents & Number Types
4.1 Exponents & Square Roots 4.2 Rational & Irrational Numbers
5 Measurement — Units
5.1 The Metric System 5.2 US Customary Units 5.3 Converting Between Metric & US Customary
6 Measurement — Applications
6.1 Dimensional Analysis 6.2 Dosage-Style Proportions 6.3 Temperature & Time Conversions
7 Measurement — Rates & Geometry
7.1 Rates & Speed/Distance/Time 7.2 Area & Perimeter 7.3 Volume & Surface Area
8 Algebra
8.1 Simplifying & Evaluating Expressions 8.2 Solving Linear Equations 8.3 Inequalities & Translating Word Problems 8.4 Slope & Coordinate Basics
9 Data and Information
9.1 Reading Tables & Graphs 9.2 Pie Charts & Percent of a Whole 9.3 Mean, Median, Mode & Range 9.4 Percent Change & Basic Probability 9.5 Comparing Two or More Data Sets
9.2 Pie Charts & Percent of a Whole
Key Takeaways Explain This Topic AI
A pie chart represents parts of a single whole; all sectors must sum to 100% (or 360°). If the sectors do not sum to 100%, the chart is incomplete or misread.
A sector's angle is the percent times 3.6 (since 360° ÷ 100% = 3.6° per percent); a 25% sector occupies 90° of the circle.
To find the value a sector represents, multiply the percent (as a decimal) by the total: value = percent × total.
A pie chart is appropriate when you want to show how a whole is divided into parts; a bar chart is better for comparing individual categories that are not parts of one whole.
Last updated: August 2026
What a Pie Chart Is
A pie chart is a circle divided into sectors (wedges). Each sector represents one category, and the size of the sector is proportional to that category's share of a total. Two rules are always true:
The sectors add up to 100% of the data.
The sectors add up to 360° of the circle.
Because 100% maps to 360°, each percent is worth 3.6° (360 ÷ 100 = 3.6). That single conversion lets you move between percent and angle.
Three Conversions to Know
- You have You want Formula
- Percent Angle angle = percent × 3.6
- Angle Percent percent = angle ÷ 3.6
- Percent Value value = (percent ÷ 100) × total
- Worked Example: Percent to Angle
A nurse-run clinic classifies its 200 patient visits by reason: 35% routine, 25% acute illness, 20% follow-up, 15% lab, 5% other. What angle should the "acute illness" sector occupy?
Step 1: Take the percent — 25%. Step 2: Multiply by 3.6: 25 × 3.6 = 90° .
A 25% sector is exactly one-quarter of the circle, which matches 90° of 360°. The math and the intuition agree.
Worked Example: Percent to Value
Using the same clinic data with 200 total visits, how many visits were for acute illness?
Step 1: Convert 25% to a decimal: 25 ÷ 100 = 0.25. Step 2: Multiply by the total: 0.25 × 200 = 50 visits .
You can also reason it through: 25% is one quarter, and one quarter of 200 is 50. Both paths reach the same answer; use whichever is faster for you.
Reading a Pie Chart
When the NEX gives you a pie chart, it usually labels each sector with either a percent or a value. Your job is to move between those two forms.
Worked Example: Value to Percent
A pie chart shows a hospital's 1,200 admissions split into four departments. The Medical sector is labeled 420 admissions. What percent of admissions were Medical?
Step 1: Divide the sector value by the total: 420 ÷ 1,200 = 0.35. Step 2: Convert to a percent: 0.35 × 100 = 35% .
Worked Example: Finding a Missing Sector
A pie chart of 500 patients labels three sectors: 40% Surgical, 30% Medical, 20% Pediatric. What is the fourth sector (Other)?
Step 1: Add the known sectors: 40 + 30 + 20 = 90%. Step 2: Subtract from 100%: 100 − 90 = 10% .
Step 3: If you need the count: 10% of 500 = 0.10 × 500 = 50 patients .
This is the most common pie-chart question on the exam: the sectors must total 100%, so a missing sector is found by subtraction.
When to Use a Pie Chart vs a Bar Chart
Pie charts answer one question: how is the whole divided? They are good when:
You have 2 to 6 categories.
The categories are mutually exclusive parts of one total.
You want to show a part-to-whole relationship ("half of all visits were routine").
Bar charts are better when:
You are comparing categories that are not parts of one whole (length of stay by unit, average BMI by age group).
You have more than 6 categories (pie charts become unreadable with many thin slices).
You want to compare exact values, since reading a bar height is more precise than reading a sector angle.
A common NEX trap is a pie chart used for data that is not a single whole — for example, a "pie chart of average blood pressure by age group." Average blood pressures are not parts of a whole; they are separate averages. A bar chart is the correct choice.
A Nursing Example: Fluid Intake
A patient's 24-hour intake totals 2,400 mL, split as: IV fluids 1,200 mL, water 600 mL, juice 360 mL, broth 240 mL.
Question: What percent of intake came from IV fluids?
Step 1: Divide: 1,200 ÷ 2,400 = 0.50. Step 2: Convert: 0.50 × 100 = 50% .
Question: What angle would the "juice" sector occupy?
Step 1: Find juice as a percent: 360 ÷ 2,400 = 0.15 = 15%. Step 2: Multiply by 3.6: 15 × 3.6 = 54° .
Quick Checks
Sectors must sum to 100% or 360°. If they do not, re-read the chart or find the missing sector by subtraction.
Percent → angle: multiply by 3.6.
Percent → value: multiply the decimal form by the total.
Value → percent: divide by the total and multiply by 100.
Ask whether the data is truly parts of one whole before choosing a pie chart.