Study guide
2.2 Measurement & Conversions
NLN PAX / NEX Nursing Entrance Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: NLN PAX / NEX Exam Overview
NLN NEX Exam Overview (Formerly PAX) NEX vs. TEAS vs. HESI A2 Comparison Registration, Scheduling & Test Day Tips
2 Chapter 1: Verbal Ability
1.1 Word Knowledge & Vocabulary 1.2 Reading Comprehension 1.3 Advanced Verbal Practice & Test Strategies
3 Chapter 2: Mathematics
2.1 Numbers & Operations 2.2 Measurement & Conversions 2.3 Algebra & Data Interpretation
4 Chapter 3: Science
3.1 Biology Fundamentals 3.2 Chemistry Basics 3.3 Health, Nutrition & Disease
5 Chapter 4: Science Part 2 — Anatomy & Physiology Focus
4.1 Body Organization, Integumentary & Skeletal Systems 4.2 Cardiovascular & Respiratory Systems 4.3 Nervous, Digestive & Other Body Systems
6 Chapter 5: Exam Strategy & Full Practice
5.1 Study Plan & Preparation Timeline 5.2 Test-Taking Strategies 5.3 Score Interpretation & Next Steps 5.4 Comprehensive Practice Questions
2.2 Measurement & Conversions
Key Takeaways Explain This Topic AI
Measurement & Conversions is about 14 items (~35%) — the largest subsection of the NEX math section
Metric prefixes step by powers of ten: kilo- (x1,000), centi- (x0.01), milli- (x0.001), micro- (x0.000001)
Memorize the household-to-metric bridge: 1 tsp = 5 mL, 1 tbsp = 15 mL, 1 oz = 30 mL, 1 cup = 240 mL, 1 kg = 2.2 lb
Dimensional analysis (the factor-label method) cancels units step by step until only the target unit remains
Temperature: F = (C x 9/5) + 32 and C = (F - 32) x 5/9; normal body temperature is 98.6F = 37C
The dosage formula is Desired / Have x Quantity = amount to give
Weight-based dosing requires converting pounds to kilograms first (divide by 2.2) before multiplying by the per-kg dose
- A wrong conversion in dosing can be a tenfold or hundredfold error — always verify units cancel correctly
- Last updated: June 2026
Measurement & Conversions on the NLN NEX
This is the largest subsection of the NEX math section — about 14 items (~35%) — and the most clinically loaded. Expect metric conversions, household-to-metric bridges, temperature conversion, and direct dosage calculations.
The metric system
- Prefix Symbol Multiplier Example
- kilo- k 1,000 1 kg = 1,000 g
- (base unit) — 1 gram (g), liter (L), meter (m)
- centi- c 0.01 1 cm = 0.01 m
- milli- m 0.001 1 mL = 0.001 L
- micro- mc / mcg 0.000001 1 mcg = 0.000001 g
Moving to a smaller unit, multiply (decimal moves right): 2.5 L = 2,500 mL .
Moving to a larger unit, divide (decimal moves left): 750 mg = 0.75 g .
Use mcg , not the symbol μg, on nursing tests — handwritten μ is mistaken for mg, a thousandfold error.
Essential nursing conversions
These are pure memorization and appear on nearly every NEX form. Note that household equivalents are approximate clinical standards (1 oz = 30 mL, not the precise 29.57 mL).
- Conversion Value Category
- 1 kilogram 2.2 pounds Weight
- 1 inch 2.54 cm Length
- 1 teaspoon 5 mL Volume
- 1 tablespoon 15 mL (3 tsp) Volume
- 1 fluid ounce 30 mL (2 tbsp) Volume
- 1 cup 240 mL (8 oz) Volume
- 1 pint 480 mL (16 oz) Volume
- 1 quart 960 mL (32 oz) Volume
- 1 liter 1,000 mL Volume
- 1 gram 1,000 mg Weight
- 1 milligram 1,000 mcg Weight
Trap: to go from kg to lb you multiply by 2.2; to go from lb to kg you divide . Mixing these up produces an answer about 4.8x too large.
IV flow-rate basics also appear here. The drop-rate formula is gtt/min = (volume in mL x drop factor in gtt/mL) / time in minutes . To infuse 1,000 mL over 8 hours with a 15 gtt/mL set: 1,000 x 15 = 15,000, divided by 480 minutes = about 31 gtt/min . The infusion-pump (mL/hr) form is simply total volume divided by total hours: 1,000 mL / 8 hr = 125 mL/hr .
Dimensional analysis (factor-label method)
Write the starting value, then multiply by conversion factors arranged so unwanted units cancel diagonally, leaving only the target unit.
Convert 154 lb to kg: 154 lb x (1 kg / 2.2 lb) = 70 kg — pounds cancel.
Multi-step, 2 pints to liters: 2 pt x (480 mL / 1 pt) x (1 L / 1,000 mL) = 0.96 L — pints cancel, then mL cancel.
If the leftover unit is wrong (e.g., you end with lb²/kg), the factors were flipped. This self-check is why dimensional analysis is the safest method under time pressure.
Temperature conversions
- Direction Formula
- Celsius to Fahrenheit F = (C x 9/5) + 32
- Fahrenheit to Celsius C = (F - 32) x 5/9
- Reference Fahrenheit Celsius
- Water freezes 32 F 0 C
- Hypothermia threshold 95 F 35 C
- Normal body temp 98.6 F 37 C
- Fever threshold 100.4 F 38 C
- Water boils 212 F 100 C
For F to C, subtract 32 before multiplying by 5/9 — order of operations matters.
Dosage calculations
The core formula:
Desired (D) / Have (H) x Quantity (Q) = amount to give
where D is the ordered dose, H is the strength on the label, and Q is its form (tablet, mL).
Order 500 mg; have 250 mg tablets: 500/250 x 1 = 2 tablets .
Order 150 mg; have 100 mg / 5 mL: 150/100 x 5 = 7.5 mL .
Weight-based (pediatric) dosing
Convert weight: pounds / 2.2 = kilograms.
Total dose: kg x mg/kg.
Volume: apply D/H x Q with the available concentration.
A child weighs 55 lb ; order is amoxicillin 25 mg/kg/day in 2 divided doses ; supply is 250 mg / 5 mL .
- 55 / 2.2 = 25 kg
- 25 x 25 = 625 mg/day
- Per dose: 625 / 2 = 312.5 mg
- Volume: 312.5/250 x 5 = 6.25 mL per dose
Trap: forgetting step 1 and multiplying pounds by mg/kg inflates the dose by 2.2x — a dangerous error the NEX tests deliberately.
Safe-dose-range checks extend this idea: a reference may list 20-40 mg/kg/day. For the 25 kg child that is 500-1,000 mg/day, so a 625 mg/day order is safe to give. If a calculated order falls outside the range, the correct clinical action is to hold and verify — the exam rewards recognizing the unsafe value, not blindly administering it.