Study guide
9.3 Control Tactics & Pesticide Mode of Action
New Mexico Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New Mexico Laws, Regulations & Licensing
1.1 NM Pesticide Control Act & NMDA Regulatory Authority 1.2 Applicator License Classifications & Experience Requirements 1.3 Commercial Applicator Operational Standards, Insurance & Records 1.4 State-Restricted Pesticides, Storage, Posting & Container Rules
2 Chapter 2: Pesticide Labeling & Federal Regulatory Standards
2.1 The Pesticide Label as a Legal Document & FIFRA 2.2 Label Components, Signal Words & Toxicity Categories 2.3 Restricted-Use Classification & Special State/Federal Registrations
3 Chapter 3: Pesticide Formulations & Adjuvants
3.1 Conventional Liquid and Dry Formulations 3.2 Specialty Formulations, Adjuvants & Surfactants 3.3 Tank Mix Compatibility, Jar Testing & Mixing Sequence
4 Chapter 4: Human Health, Pesticide Toxicology & Emergency First Aid
4.1 Routes of Exposure & Measures of Toxicity 4.2 Pesticide Poisoning Symptoms & Cholinesterase Inhibition 4.3 Emergency First Aid, Heat Stress in Arid Climates & Response Protocols
5 Chapter 5: Personal Protective Equipment & Worker Protection Standard
5.1 PPE Selection, Chemical Resistance & Maintenance 5.2 Respiratory Protection & NIOSH Standards 5.3 EPA Worker Protection Standard (WPS) Requirements
6 Chapter 6: Environmental Protection & New Mexico Ecosystems
6.1 Pesticide Environmental Fate in Arid Conditions 6.2 Groundwater, Surface Water & Acequia Irrigation Protection 6.3 Non-Target Species Protection, Pollinators & Endangered Species
7 Chapter 7: Spray Drift Management & Meteorological Factors
7.1 Spray Drift Mechanisms & Droplet Size Dynamics 7.2 Meteorological Factors & Temperature Inversions 7.3 Drift Reduction Technologies & Best Application Practices
8 Chapter 8: Application Equipment, Calibration & Waste Disposal
8.1 Application Equipment, Components & Maintenance 8.2 Equipment Calibration Methods & Calculations 8.3 Safe Mixing, Loading & Container Disposal Procedures 8.4 Application Methods & Procedures
9 Chapter 9: Pest Identification & Integrated Pest Management
9.1 Pest Groups, Identification & Life Cycles 9.2 IPM Principles, Scouting & Action Thresholds 9.3 Control Tactics & Pesticide Mode of Action 9.4 Pesticide Resistance & Resistance Management
10 Chapter 10: Transportation, Storage, Security & Emergency Response
10.1 Transporting Pesticides Safely 10.2 Storage Management, Inventory & Chemical Security 10.3 Spill & Emergency Response — Control, Contain, Clean Up 10.4 Pesticide Waste, Rinsate & Excess Product Disposal
11 Chapter 11: Supervision, Professional Conduct & Liability
11.1 Supervising Noncertified Applicators & Employer Duties 11.2 Professional Conduct, Communication, Complaints & Liability
9.3 Control Tactics & Pesticide Mode of Action
Key Takeaways Explain This Topic AI
The IPM toolbox has six tactic families - cultural, mechanical or physical, biological, genetic or host resistance, regulatory, and chemical - and durable programs combine several rather than relying on one.
Pesticide names ending in -cide identify the target group: insecticide, herbicide, fungicide, rodenticide, nematicide, miticide, avicide, molluscicide, bactericide, and algaecide.
Selective products control some organisms while sparing others; non-selective products kill broadly, which makes them useful for total vegetation control and dangerous near desirable plants.
Contact products kill only the tissue or organism they touch, while systemic products are absorbed and translocated internally, which is why thorough coverage matters far more for contact materials.
IRAC, HRAC, and FRAC group numbers printed on the label identify the mode of action and are the only reliable basis for rotating chemistry - two different brand names can share one group number.
Last updated: September 2026
9.3 Control Tactics & Pesticide Mode of Action
Once a pest is identified and a threshold is crossed, the applicator chooses how to intervene. The federal core competency standards at 40 CFR § 171.103(c)(5) require a certified applicator to understand pesticide types, formulations, and their characteristics; competency area (c)(7) requires understanding of application methods. This section covers the decision that sits between those two: what kind of tool, and what kind of chemistry.
The Six Families of Control Tactics
Tactic family What it does New Mexico examples
Cultural Changes the growing or living environment so the pest cannot establish Crop rotation to break root-knot nematode cycles in chile, irrigation scheduling that shortens leaf wetness, sanitation of fallen pecans, removing standing water that breeds mosquitoes, eliminating harborage and food in a restaurant
Mechanical / Physical Physically removes or excludes the pest Cultivation of annual weeds, mowing before seed set, screening and door sweeps to exclude rodents, sticky barriers, heat treatment for bed bugs, trapping pocket gophers
Biological Uses natural enemies, pathogens, or competitors Conserving lady beetles, lacewings, and parasitic wasps in alfalfa and pecans; Bacillus thuringiensis against caterpillars; predatory mites in greenhouses; classical biological control agents released against saltcedar
Genetic / Host resistance Uses resistant or tolerant varieties and rootstocks Nematode-resistant and disease-resistant chile and vegetable varieties
Regulatory Government action to prevent introduction or spread Quarantines and inspections; this is Category 9 (Regulatory/Quarantine Pests) work
Chemical Applies a pesticide Everything else in this guide
Two practical rules follow. First, cultural and mechanical tactics are usually cheaper, longer-lasting, and carry no re-entry interval , so they are considered first when they are available in the time the situation allows. Second, combining tactics is what makes a program durable — a program resting entirely on one chemistry is the single most reliable way to produce resistance, which is the subject of Section 9.4.
Biological control carries one operational warning worth memorizing: broad-spectrum insecticides kill natural enemies along with the pest. Because predator and parasite populations rebuild more slowly than the pest they eat, a broad-spectrum spray can be followed weeks later by a secondary pest outbreak — spider mites flaring in pecans and cotton after a broad-spectrum application is the textbook New Mexico example — or by a pest resurgence in which the original pest returns to a higher density than before treatment.
Classifying Pesticides by Target
The suffix -cide means "killer," and the prefix names the target:
- Pesticide type Target
- Insecticide Insects
- Miticide / Acaricide Mites and ticks
- Herbicide Weeds and unwanted plants
- Fungicide Fungi and fungal-like pathogens
- Bactericide Bacteria
- Nematicide Nematodes
- Rodenticide Rats, mice, and other rodents
- Avicide Birds
- Molluscicide Slugs and snails
- Algaecide Algae
- Predacide Predatory vertebrates
Several non- -cide classes appear on labels and are still pesticides under FIFRA and the Pesticide Control Act: defoliants (cause leaf drop, used ahead of cotton harvest), desiccants (dry plant tissue), plant growth regulators , insect growth regulators , repellents , attractants (including pheromones), and antimicrobials / disinfectants .
Classifying Pesticides by Selectivity
A selective pesticide controls some organisms while leaving closely related ones largely unharmed. A selective grass herbicide can be sprayed over a broadleaf crop; a selective broadleaf herbicide such as 2,4-D can be used in a grass pasture or lawn.
A non-selective (broad-spectrum) pesticide kills most or all organisms in the treated group. Glyphosate on any green plant is the standard example.
Selectivity is not purely chemical. It can also be achieved through placement — a shielded sprayer, a hooded boom, a directed basal spray, or a wiper applicator uses a non-selective product selectively by controlling where it lands. In New Mexico row crops and orchards this is a common way to keep a non-selective herbicide off the crop.
Classifying Pesticides by Movement
Class Behavior Coverage requirement
Contact Kills only the tissue or organism it physically touches; does not move within the plant or animal Thorough, complete coverage is essential — undersides of leaves, dense canopy interiors, cracks and crevices
Systemic Absorbed and translocated internally through the plant's vascular system or the animal's circulation Coverage still matters but uptake site matters more; a systemic reaches tissue the spray never touched
Translocated herbicide Moves with the plant's sugars or water The basis for perennial weed control described in Section 9.1
This distinction drives application decisions constantly. A contact insecticide against spider mites on the undersides of pecan leaves demands high carrier volume and canopy penetration; a systemic soil-applied insecticide against the same pest does not. A contact herbicide burns down the top of field bindweed and the plant returns from its deep root system in three weeks; a translocated herbicide applied in fall reaches those roots.
Classifying by Timing and Action
Herbicide timing:
Pre-plant — applied before the crop is planted, sometimes incorporated.
Pre-emergence — applied before the weed emerges; forms a treated zone the germinating seedling grows through. In New Mexico, pre-emergence herbicides must usually be moved into the soil by irrigation or rainfall soon after application, because intense high-elevation sunlight photodegrades exposed material on the surface.
Post-emergence — applied to emerged, actively growing weeds.
Fungicide action:
Protectant — must be on the plant surface before the spore lands and infects. It cannot cure an established infection.
Systemic / curative / eradicant — has some ability to act after infection begins, within a limited window.
Insecticide route:
Stomach poison — must be eaten; effective against chewing insects and the basis of baits.
Contact poison — absorbed through the cuticle on contact.
Fumigant — a gas that penetrates soil, structures, or commodities and enters through the respiratory system. Fumigants are the highest-hazard class an applicator handles and are their own category (7C) in New Mexico.
Mode of Action Groups: The Number That Matters
Mode of action (MOA) is the specific biochemical process the pesticide disrupts. Three international committees assign group codes that registrants print on the label's front panel:
System Covers Code format
IRAC (Insecticide Resistance Action Committee) Insecticides and miticides Group number, sometimes with a letter (for example 3A, 4A, 28)
- HRAC / WSSA (Herbicide Resistance Action Committee) Herbicides Group number (for example 2, 4, 9, 14, 15)
- FRAC (Fungicide Resistance Action Committee) Fungicides Group number (for example 3, 7, 11)
The single most useful label reading skill in resistance management: two products with completely different brand names, different manufacturers, different formulations, and different prices can carry the same group number — meaning they attack the same biochemical target and a pest resistant to one is resistant to the other. "Rotating products" by brand name is not rotation. Rotating group numbers is rotation. Section 9.4 builds the whole resistance program on this fact.
A worked example: a grower alternates three glyphosate products from three different suppliers across three seasons and believes the chemistry is being rotated. All three are Group 9 . The weed population sees one mode of action for three consecutive years, which is precisely the selection pressure that produced glyphosate-resistant kochia and Palmer amaranth across the western United States.