Study guide

9.1 Pest Groups, Identification & Life Cycles

New Mexico Pesticide Applicator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New Mexico Laws, Regulations & Licensing

1.1 NM Pesticide Control Act & NMDA Regulatory Authority 1.2 Applicator License Classifications & Experience Requirements 1.3 Commercial Applicator Operational Standards, Insurance & Records 1.4 State-Restricted Pesticides, Storage, Posting & Container Rules

2 Chapter 2: Pesticide Labeling & Federal Regulatory Standards

2.1 The Pesticide Label as a Legal Document & FIFRA 2.2 Label Components, Signal Words & Toxicity Categories 2.3 Restricted-Use Classification & Special State/Federal Registrations

3 Chapter 3: Pesticide Formulations & Adjuvants

3.1 Conventional Liquid and Dry Formulations 3.2 Specialty Formulations, Adjuvants & Surfactants 3.3 Tank Mix Compatibility, Jar Testing & Mixing Sequence

4 Chapter 4: Human Health, Pesticide Toxicology & Emergency First Aid

4.1 Routes of Exposure & Measures of Toxicity 4.2 Pesticide Poisoning Symptoms & Cholinesterase Inhibition 4.3 Emergency First Aid, Heat Stress in Arid Climates & Response Protocols

5 Chapter 5: Personal Protective Equipment & Worker Protection Standard

5.1 PPE Selection, Chemical Resistance & Maintenance 5.2 Respiratory Protection & NIOSH Standards 5.3 EPA Worker Protection Standard (WPS) Requirements

6 Chapter 6: Environmental Protection & New Mexico Ecosystems

6.1 Pesticide Environmental Fate in Arid Conditions 6.2 Groundwater, Surface Water & Acequia Irrigation Protection 6.3 Non-Target Species Protection, Pollinators & Endangered Species

7 Chapter 7: Spray Drift Management & Meteorological Factors

7.1 Spray Drift Mechanisms & Droplet Size Dynamics 7.2 Meteorological Factors & Temperature Inversions 7.3 Drift Reduction Technologies & Best Application Practices

8 Chapter 8: Application Equipment, Calibration & Waste Disposal

8.1 Application Equipment, Components & Maintenance 8.2 Equipment Calibration Methods & Calculations 8.3 Safe Mixing, Loading & Container Disposal Procedures 8.4 Application Methods & Procedures

9 Chapter 9: Pest Identification & Integrated Pest Management

9.1 Pest Groups, Identification & Life Cycles 9.2 IPM Principles, Scouting & Action Thresholds 9.3 Control Tactics & Pesticide Mode of Action 9.4 Pesticide Resistance & Resistance Management

10 Chapter 10: Transportation, Storage, Security & Emergency Response

10.1 Transporting Pesticides Safely 10.2 Storage Management, Inventory & Chemical Security 10.3 Spill & Emergency Response — Control, Contain, Clean Up 10.4 Pesticide Waste, Rinsate & Excess Product Disposal

11 Chapter 11: Supervision, Professional Conduct & Liability

11.1 Supervising Noncertified Applicators & Employer Duties 11.2 Professional Conduct, Communication, Complaints & Liability

9.1 Pest Groups, Identification & Life Cycles

Key Takeaways Explain This Topic AI

Correct pest identification precedes product selection: the wrong identification produces a legal application that still fails, wasting the chemical and selecting for resistance.

Insects with complete metamorphosis (egg, larva, pupa, adult) are usually vulnerable as small larvae, while the pupal stage is the hardest to reach with contact insecticides.

Chewing mouthparts can be controlled with stomach poisons and residues on foliage, but piercing-sucking pests such as aphids and leafhoppers generally require contact or systemic products.

Weed life cycle drives timing: winter annuals such as London rocket are controlled in fall or early winter, while perennials such as field bindweed are best treated when translocating to roots.

Plant disease requires all three sides of the disease triangle at once - a susceptible host, a viable pathogen, and a favorable environment - so removing any one side stops the disease.

Last updated: September 2026

9.1 Pest Groups, Identification & Life Cycles

Every enforceable decision an applicator makes downstream — product selection, rate, timing, equipment, re-entry, and whether a pesticide is warranted at all — depends on one upstream judgment: what is the pest? The federal core competency standards at 40 CFR § 171.103(c)(4) state the requirement plainly: a certified applicator must be able to recognize common pests and damage symptoms, and must confirm that the product's labeling permits its use against that pest at that site.

A misidentification is not a small error. It produces an application that is perfectly legal on paper — right site, right rate, right PPE — and completely useless in the field. The grower pays for the chemical, the pest population continues unchecked, the surviving individuals are selected for tolerance, and the applicator's professional reputation absorbs the loss.

What Counts as a "Pest"

A pest is any organism that interferes with human activity, property, health, or an agricultural commodity. The Pesticide Control Act's definitions section reaches insects, weeds, plant pathogens, nematodes, and vertebrates alike. Five groups cover essentially everything a New Mexico applicator will encounter.

Pest group Representative New Mexico examples Typical control class Key biological lever

Insects and related arthropods Pecan nut casebearer, beet leafhopper, alfalfa weevil, twospotted spider mite, subterranean termite, bed bug Insecticide, miticide (acaricide) Life stage and mouthpart type

Weeds Kochia, Russian thistle, London rocket, field bindweed, johnsongrass, saltcedar, African rue, yellow nutsedge Herbicide Annual vs. biennial vs. perennial life cycle

Plant pathogens Phytophthora root rot of chile, cotton root rot, powdery mildew, pecan scab Fungicide, bactericide The disease triangle

Nematodes Root-knot nematode in chile and vegetables Nematicide, fumigant Soil-dwelling; sampling required

Vertebrates Pocket gopher, rock squirrel, prairie dog, roof rat, house mouse, pigeon Rodenticide, avicide, repellent Feeding behavior and bait acceptance

Insects: Metamorphosis Decides the Window

Insects change form as they develop, and the vulnerable window is a function of that development pattern.

Complete Metamorphosis (egg → larva → pupa → adult)

Moths, butterflies, beetles, flies, and wasps develop this way. The larva looks nothing like the adult and usually eats something entirely different.

The larva is the damaging stage for most crop moths and beetles, and it is also the most susceptible stage — especially when it is small and newly hatched.

The pupa is non-feeding, often buried in soil or wrapped in a cocoon, and is essentially untouchable by a foliar contact insecticide.

The adult may cause no direct damage at all (many moths only lay eggs), which is why adult trap catches are used as a timing signal rather than a kill target.

Why this matters operationally: a grower who sprays when large larvae are already boring inside a pecan nut or a chile pod has missed the window. The insecticide cannot reach a protected larva. Control is aimed at the interval between egg hatch and entry.

Gradual (Incomplete) Metamorphosis (egg → nymph → adult)

True bugs, aphids, leafhoppers, grasshoppers, and cockroaches develop this way. The nymph resembles a small wingless adult, lives in the same place, and eats the same food.

Every mobile stage feeds, so damage is continuous rather than confined to one stage.

Nymphs are generally more susceptible than hardened adults, which favors early treatment.

Mouthparts Decide the Product Class

Mouthpart type Pests Damage signature Control implication

Chewing Caterpillars, beetles, grasshoppers, termites Holes, notched leaf margins, defoliation, tunnels, frass Stomach poisons and foliar residues work; the insect eats the treated surface

Piercing-sucking Aphids, leafhoppers, whiteflies, true bugs, mites Stippling, curling, yellowing, honeydew and sooty mold, virus transmission A stomach poison on the leaf surface is bypassed; use contact or systemic products

A beet leafhopper transmitting curly top virus into a chile field illustrates the point twice over: it is a piercing-sucking insect, so surface stomach poisons are largely irrelevant, and because the damage is the virus rather than the feeding, killing the vector after transmission does not repair the crop.

Weeds: Life Cycle Sets the Calendar

A weed is simply a plant growing where it is not wanted. Herbicide selection depends far less on the weed's name than on its life cycle and whether it is a grass, a broadleaf, or a sedge.

Summer annuals germinate in spring, set seed in summer, and die with frost. Kochia, Russian thistle (tumbleweed), and Palmer amaranth run this cycle across New Mexico's dryland and irrigated ground. Pre-emergence herbicides applied before germination, or post-emergence sprays on small seedlings, are the effective windows.

Winter annuals germinate in fall, overwinter as rosettes, and bolt in spring. London rocket is the classic New Mexico example in orchards, fallow ground, and roadsides. Treating a bolted, flowering winter annual in April is late; the fall and early-winter rosette is the target.

Biennials need two seasons — a rosette the first year, a flowering stalk the second. Control the rosette.

Simple perennials regrow from a taproot or crown. Creeping perennials — field bindweed, johnsongrass, yellow and purple nutsedge, saltcedar, African rue — regrow from rhizomes, stolons, tubers, or deep lateral roots. Cultivation fragments these structures and multiplies the infestation.

Perennial timing rule: systemic herbicides move with the plant's sugars. Perennials translocate sugars downward to roots and rhizomes in late summer and fall , and upward in spring. A translocated herbicide applied to actively growing fall foliage reaches the root system; the same product applied to spring growth largely stays in the shoots and the weed returns.

Sedges are neither grasses nor broadleaves: nutsedge has triangular solid stems and reproduces from tubers , and many grass herbicides simply do not control it. Calling nutsedge a "grass" is one of the most common and most expensive weed misidentifications in New Mexico turf and vegetable ground.

  • Plant Diseases: The Disease Triangle
  • A plant disease develops only when three conditions overlap simultaneously: SUSCEPTIBLE HOST
  • /\
  • / \
  • / \
  • / \
  • VIABLE PATHOGEN ---- FAVORABLE ENVIRONMENT
  • (fungus, bacterium, (moisture, temperature,
  • virus, phytoplasma) humidity, leaf wetness)

Remove ANY ONE side and the disease does not develop.

This is the single most practical diagnostic concept in plant pathology, because it identifies three separate intervention points: plant a resistant variety (host), remove infected residue or use clean seed (pathogen), or change irrigation practice to shorten leaf wetness (environment). Chemical control is only one option, and for many diseases the fungicide must be applied before infection — a protectant fungicide cannot cure an established infection, while an eradicant or systemic fungicide has limited curative reach after symptoms appear.

Disease symptoms are also frequently mimicked by non-living (abiotic) problems. Salt injury, herbicide carryover, caliche layers restricting roots, iron chlorosis on high-pH soil, and simple water stress all produce yellowing and stunting that look like root disease. Applying a fungicide to an abiotic problem is a guaranteed failure and is also an application to a pest that the label does not cover.

Nematodes and Vertebrates

Nematodes are microscopic roundworms. Root-knot nematode in chile and vegetables causes galls on roots and above-ground symptoms — stunting, wilting in mid-day heat, patchy poor growth — that are indistinguishable from irrigation or fertility problems. Diagnosis requires a soil and root sample submitted to a laboratory , not a visual field call.

Vertebrate pests are controlled primarily through bait acceptance, which depends on the animal's feeding behavior. Pocket gophers feed underground and take bait placed in the burrow system; rock squirrels and prairie dogs feed above ground; roof rats travel overhead while Norway rats travel at ground level. Identifying which rodent is present determines where bait stations and traps are placed, and misplacement is the usual reason a rodent program fails.

Getting an Authoritative Identification in New Mexico

An applicator is not expected to be a taxonomist. The applicator is expected to know when a field call is not good enough and where to send the sample.

The NMSU Plant Diagnostic Clinic analyzes plant material for plant pathogens and environmental stresses, suggests control measures where they exist, and facilitates insect and weed identification through referral to the appropriate specialists . Recall the boundary drawn in Chapter 1: NMSU Extension is the educational and diagnostic body; NMDA is the regulatory body.

County Extension offices are the normal first contact. The clinic works through them, and samples submitted through an Extension office are handled without a diagnostic service fee.

For a suspected new or invasive pest, or a suspected quarantine pest, NMDA's regulatory program is involved because Category 9 (Regulatory/Quarantine Pests) work is a government function.

Exam Framing: questions in this area are rarely "name the insect." They are "given this damage pattern and this life cycle, what is the correct control decision?" Learn the biology as a decision tool, not as vocabulary.