Study guide

16.1 Surety and Fidelity Bonds

New Mexico Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: New Mexico Property & Casualty Insurance Exam Overview

New Mexico Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: New Mexico P&C Insurance Regulation & Licensing

1.1 New Mexico Office of Superintendent of Insurance 1.2 New Mexico P&C Producer Licensing Requirements 1.3 New Mexico Producer Responsibilities and Prohibited Practices

22 Chapter 2: New Mexico Property Insurance

2.1 New Mexico Homeowners Insurance 2.2 New Mexico Commercial Property Insurance

23 Chapter 3: New Mexico Auto & Casualty Insurance

3.1 New Mexico Auto Insurance Requirements 3.2 New Mexico General Liability and Casualty Insurance

24 Chapter 4: New Mexico Ethics & Professional Conduct

4.1 Fiduciary Duties and Professional Responsibilities 4.2 New Mexico Consumer Protection and Regulatory Compliance

16.1 Surety and Fidelity Bonds

Key Takeaways Explain This Topic AI

Surety involves three parties (principal, obligee, surety) and is a guarantee with a reimbursement right against the principal - not loss-spreading like insurance.

Construction sequence: bid bond (5-20% of bid), then performance and payment bonds (each 100% of contract). The penal sum caps the surety's exposure.

The Miller Act mandates payment and performance bonds on federal construction over $150,000; unpaid subs sue on the payment bond.

Fidelity bonds protect the EMPLOYER from employee dishonesty - functionally insurance, the opposite direction from surety's third-party guarantee.

Last updated: June 2026

Surety Is a Guarantee, Not Insurance

A surety bond is a three-party guarantee that one party will perform an obligation owed to another. It is not insurance in the loss-spreading sense: the surety does not expect or price for losses. Instead it lends its credit, and if it pays a claim it expects full reimbursement from the principal.

Memorize the three parties:

Principal - the party who must perform the obligation (the contractor, the licensed plumber, the court-appointed executor). The principal buys the bond.

Obligee - the party protected by the bond, to whom the obligation is owed (the project owner, the licensing state, the court).

Surety - the company that guarantees performance and pays the obligee if the principal defaults.

The single most-tested distinction: in insurance, the carrier absorbs the loss; in suretyship, the surety has a right of reimbursement (indemnity) against the principal. A two-party indemnity agreement signed by the principal at bond issuance is what makes this enforceable. Underwriting therefore resembles credit underwriting - the surety examines the principal's capital, capacity, and character (the "three Cs").

Contract (Construction) Bonds

Construction is the largest surety market. Three bonds appear in sequence on a typical public job.

  • Bond Guarantees Typical penal sum
  • Bid bond Bidder will sign the contract and furnish the required bonds if awarded the job 5-20% of bid
  • Performance bond Contractor will complete the project per the contract terms 100% of contract price
  • Payment bond Contractor will pay subcontractors, laborers, and material suppliers 100% of contract price

The penal sum is the maximum the surety will pay - it caps the surety's exposure just as a policy limit caps an insurer's. If a bonded contractor defaults and the surety spends $250,000 to hire a replacement contractor to finish, the surety pays the obligee but then pursues the defaulting principal for that $250,000 under the indemnity agreement.

The Miller Act (federal) requires performance and payment bonds on federal construction contracts over $150,000 (lower thresholds use a payment bond or alternative). Each state's equivalent is called a "Little Miller Act." A subcontractor on a federal job who is not paid sues on the payment bond , not the performance bond.

License/Permit, Court, and Fidelity Bonds

License and permit bonds are required by a government body before it issues a license (contractors, mortgage brokers, auto dealers). They guarantee the principal will comply with the law or ordinance; the obligee is the public or the government unit.

Court bonds divide into two families: judicial bonds (e.g., an appeal bond or injunction bond, guaranteeing a litigant pays damages if it loses) and fiduciary bonds (guaranteeing an executor, administrator, or guardian faithfully handles estate assets).

Fidelity bonds are the bridge to crime coverage and confuse many candidates. A fidelity bond protects an employer against loss from the dishonest acts of its own employees (embezzlement, theft). It is functionally first-party employee-dishonesty protection, even though it is called a bond. Contrast with surety, which protects a third-party obligee against the principal's nonperformance.

Surety bond: three parties, guarantees performance, surety has reimbursement rights.

Fidelity bond: protects the employer from employee theft - closer to insurance than to true suretyship.

Trap: candidates pick "the surety expects to be reimbursed" for a fidelity loss. A fidelity bond does not pursue the honest employer; like insurance, the carrier absorbs the loss (subject to subrogation against the thieving employee).

Underwriting and Premium Mechanics

Because the surety expects no losses, the bond premium is a service charge for lending credit, not a loss-funded rate. Contract-bond premiums often run a few percent of the contract price and decline in steps as the contract size rises. The surety can cancel few bonds once issued - a performance bond runs to project completion - so prequalification is everything.

Key exam points on bond mechanics:

A maintenance bond guarantees workmanship for a stated period (often one year) after the project is accepted - distinct from the performance bond.

A supply (or material) bond guarantees delivery of equipment or materials under a purchase contract.

The obligee cannot recover more than the penal sum , even if completion costs exceed it; the principal remains liable for the excess.

Finally, distinguish a financial guaranty (guaranteeing payment of a debt or financial obligation) from a performance guaranty (guaranteeing an act is performed). Most construction and license bonds are performance guaranties, which carry different underwriting and reserve treatment than financial guaranties.

Bonds vs. Insurance — the Three-Party Structure

A surety bond is fundamentally different from insurance. Insurance is a two-party contract (insurer/insured) transferring risk. A surety bond is a three-party guarantee: the principal (who must perform), the obligee (who is protected and requires the bond), and the surety (who guarantees the principal's performance). If the principal defaults, the surety pays the obligee — then seeks reimbursement from the principal (right of indemnity/subrogation). Surety expects no loss and underwrites the principal's character, capacity, and capital like a credit decision, not a loss-frequency calculation.

Contract Bonds and Fidelity Bonds

Contract (construction) bonds guarantee a builder's obligations:

  • Bond Guarantees
  • Bid bond The contractor will honor its bid and post the performance bond if awarded
  • Performance bond The project will be completed per contract
  • Payment bond Subcontractors and suppliers will be paid
  • Maintenance bond Workmanship for a stated period after completion

Other bond types include license/permit bonds , public official bonds , and judicial/court bonds (e.g., fiduciary or appeal bonds). A fidelity bond , by contrast, protects an employer against employee dishonesty — closer to crime insurance — and is the bridge to the crime forms. The exam's signature distinction: insurance expects and prices for losses; surety expects none and pursues the principal for reimbursement after paying the obligee.