Study guide

6.1 Property Conditions and Environmental Hazards

New Mexico Associate Broker Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: New Mexico Real Estate Exam Overview

New Mexico Real Estate Exam Overview

3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

5 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

6 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

8 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

9 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

10 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

11 Chapter 1: New Mexico Real Estate Commission & Licensing

1.1 New Mexico Real Estate Commission (NMREC) 1.2 New Mexico License Requirements 1.3 License Maintenance and Renewal

12 Chapter 2: Agency & Disclosure Requirements

2.1 Broker Duties Disclosure Requirements 2.2 Duties Owed to All Parties 2.3 Property Disclosure Requirements

13 Chapter 3: New Mexico Contracts & Property Law

3.1 New Mexico Contract Requirements 3.2 New Mexico Property Law Concepts

14 Chapter 4: Trust Accounts & License Violations

4.1 New Mexico Trust Account Requirements 4.2 License Law Violations & Discipline

6.1 Property Conditions and Environmental Hazards

Key Takeaways Explain This Topic AI

Lead-based paint disclosure under federal law applies to housing built before 1978 and requires the EPA pamphlet plus a 10-day inspection opportunity.

Radon is a naturally occurring radioactive gas measured in picocuries per liter (pCi/L); the EPA action level is 4.0 pCi/L.

Asbestos is hazardous only when friable (crumbled and airborne); intact asbestos is often safest left undisturbed and encapsulated.

Mold thrives on moisture; remediation targets the water source first, and small areas under about 10 square feet can often be handled without a professional.

Wetlands are federally regulated; filling or developing them typically requires a permit, and their presence can sharply limit buildable land.

Last updated: June 2026

Property Conditions and Environmental Hazards

Real estate licensees do not need to be environmental engineers, but the exam expects you to recognize common hazards, know the federal thresholds, and understand how each affects a transaction. The recurring traps test whether you confuse measurement units, action levels, or the difference between materials that are dangerous in place versus only when disturbed.

Lead-Based Paint

Lead-based paint was banned for residential use in 1978 . The federal Residential Lead-Based Paint Hazard Reduction Act (Title X) therefore applies to target housing built before 1978 . For covered sales and leases, the seller or landlord must:

Disclose any known lead hazards and provide available records or reports.

Give the buyer the EPA pamphlet "Protect Your Family From Lead in Your Home."

Provide buyers a 10-day period to conduct a lead inspection or risk assessment (the period can be shortened or waived only by mutual agreement).

Include a Lead Warning Statement and signatures in the contract.

The seller does not have to test or remediate — only to disclose what is known and supply the pamphlet. Exempt housing includes units built in 1978 or later, zero-bedroom units (studios, lofts), short-term rentals of 100 days or less, and housing for the elderly or disabled with no children expected.

Lead poisoning is most dangerous to young children, harming brain development. Renovation, repair, and painting that disturbs lead paint in pre-1978 housing must follow EPA RRP (Renovation, Repair and Painting) Rule lead-safe work practices using certified firms. A licensee who knows of a lead hazard cannot hide it; failing to deliver the disclosure can trigger civil penalties and treble damages.

Asbestos

Asbestos was widely used before the late 1970s in insulation, floor tiles, roofing, and pipe wrap. The critical exam concept is friability . Friable asbestos can be crumbled by hand pressure, releasing fibers into the air where they can be inhaled and cause lung disease (asbestosis, mesothelioma). Non-friable asbestos is bound in a solid material and is generally safe while intact.

The counterintuitive rule: removal is not always best. Disturbing intact asbestos can release more fibers than leaving it alone. Encapsulation (sealing the material) is frequently preferred over abatement (removal). Removal must be performed by licensed professionals using containment, negative air pressure, and proper disposal.

Trap alert: candidates often pick "remove immediately" as the safest answer. On the exam, the safest response to intact asbestos is usually to leave it undisturbed or encapsulate it. Removal is reserved for damaged, deteriorating, or about-to-be-disturbed material — for example, before a renovation that would cut into asbestos-containing insulation.

Radon

Radon is a colorless, odorless, naturally occurring radioactive gas from the decay of uranium in soil and rock. It enters through foundation cracks, sumps, and crawl spaces, and accumulates in lower levels. It is the second leading cause of lung cancer after smoking.

Radon is measured in picocuries per liter (pCi/L) .

The EPA action level is 4.0 pCi/L — at or above this, mitigation is recommended.

Mitigation typically uses sub-slab depressurization : a vent pipe and fan that draw soil gas from beneath the slab and exhaust it above the roofline.

Trap alert: do not confuse pCi/L (radon) with the units used for other hazards. Radon mitigation is relatively inexpensive and does not usually destroy value.

Comparing the Major Hazards

The table below consolidates the facts most often tested. Memorize the measurement column and the action/threshold column — those drive most exam questions.

  • Hazard Source Key threshold / unit Primary response
  • Lead paint Paint in pre-1978 housing Banned 1978; 10-day inspection right Disclose, give EPA pamphlet
  • Asbestos Insulation, tiles, pipe wrap Danger only when friable Encapsulate or licensed removal
  • Radon Soil gas (uranium decay) EPA action level 4.0 pCi/L Sub-slab depressurization
  • Mold Moisture intrusion No federal numeric standard Fix water source, then remediate
  • Wetlands Saturated/hydric soils Federal permit to fill Permit, delineation, limited use
  • Mold

Mold grows wherever moisture and organic material meet. There is no federal numeric exposure standard for mold, which is why exam answers stress controlling the moisture source as the first step. Remediation that cleans visible mold but ignores the leak guarantees regrowth. The EPA guidance: areas under roughly 10 square feet can often be cleaned by the owner; larger contamination warrants a professional.

Wetlands and Buildable Land

Wetlands are areas saturated by surface or ground water enough to support water-loving vegetation and hydric soils . They are protected under the federal Clean Water Act , with the U.S. Army Corps of Engineers and EPA overseeing permits. Filling, draining, or dredging a wetland generally requires a permit, and a formal wetland delineation establishes the boundary.

Worked Example: Value Impact

A 5-acre parcel lists at $400,000, implying $80,000 per acre . A wetland delineation reveals 2 acres are protected wetland that cannot be built on or filled without an unlikely permit. Only 3 buildable acres remain.

If a builder values the land purely on buildable area at $80,000/acre, the supportable price drops toward 3 × $80,000 = $240,000 — a $160,000 reduction. This illustrates why wetlands are a material fact: they can erase a large share of usable land and value. A licensee who knows wetlands exist must disclose them; concealing them invites a misrepresentation claim.