Study guide

1.3 Legal Descriptions and Surveys

New Mexico Associate Broker Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: New Mexico Real Estate Exam Overview

New Mexico Real Estate Exam Overview

3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

5 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

6 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

8 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

9 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

10 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

11 Chapter 1: New Mexico Real Estate Commission & Licensing

1.1 New Mexico Real Estate Commission (NMREC) 1.2 New Mexico License Requirements 1.3 License Maintenance and Renewal

12 Chapter 2: Agency & Disclosure Requirements

2.1 Broker Duties Disclosure Requirements 2.2 Duties Owed to All Parties 2.3 Property Disclosure Requirements

13 Chapter 3: New Mexico Contracts & Property Law

3.1 New Mexico Contract Requirements 3.2 New Mexico Property Law Concepts

14 Chapter 4: Trust Accounts & License Violations

4.1 New Mexico Trust Account Requirements 4.2 License Law Violations & Discipline

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

The three accepted legal-description methods are metes and bounds, rectangular (government) survey, and lot-and-block (recorded plat).

Metes and bounds starts and returns to a Point of Beginning (POB) using distances and compass bearings; a description that does not close is defective.

A section is 1 mile square and contains 640 acres; an acre is 43,560 square feet.

Township and range lines locate a 6-mile-square township of 36 sections relative to a principal meridian and base line.

A datum and benchmark establish elevation for air lots and condominium units; horizontal descriptions alone cannot describe a unit above the ground.

Last updated: June 2026

Why a Street Address Is Not Enough

A mailing address can change and does not define boundaries, so deeds use a legal description — a precise, court-recognized way to identify a parcel. There are three accepted methods, and a single deed may combine them.

Method How it works Best for

Metes and bounds Distances (metes) and directions/bearings (bounds) from a Point of Beginning Irregular parcels; the original colonies

Rectangular (government) survey Townships, ranges, and sections from principal meridians and base lines Large areas in most states west/south of the originals

Lot and block (recorded plat) Subdivision lot and block numbers on a recorded map Subdivided urban/suburban lots

All three, properly executed, are legally sufficient. A description that cannot be plotted to a single, closed parcel is void for uncertainty .

Metes and Bounds

A metes-and-bounds description begins at a Point of Beginning (POB) — usually a permanent monument or a tie to a known corner — then recites a series of courses (e.g., "N 45° E, 200 feet") around the perimeter and must return to the POB . If the calls do not return to the POB, the parcel does not close and the description is defective.

Key terms tested:

Metes = measured distances (feet, chains, rods). A chain = 66 feet; a rod = 16.5 feet.

Bounds = direction calls, given as bearings relative to north or south (e.g., S 30° W).

Monument = a fixed physical marker (iron pin, stone, large tree) controlling over a written distance if the two conflict.

Trap: when a recited distance conflicts with a called monument, the monument controls , because a physical marker is presumed more reliable than a number a scrivener may have miscopied.

Rectangular (Government) Survey and the Math

The rectangular system overlays the country with principal meridians (north–south lines) and base lines (east–west lines). From these, range lines run north–south every 6 miles and township lines run east–west every 6 miles, creating a grid of townships.

Memorize these conversions — exams test the arithmetic directly:

  • 1 acre = 43,560 square feet
  • 1 section = 1 mile × 1 mile = 640 acres
  • 1 township = 6 miles × 6 miles = 36 sections = 23,040 acres

Sections are numbered 1–36 in a boustrophedonic (back-and-forth) pattern, starting in the northeast corner with Section 1.

Worked acreage problem. A parcel is described as "the SE¼ of the NW¼ of Section 14." Multiply the fractions: ¼ × ¼ = 1/16 of the section. Then 640 acres ÷ 16 = 40 acres . Quick rule: when a description chains quarters, multiply the denominators (4 × 4 = 16) and divide 640 by that product.