Study guide
4.4 Rate Locks and Pricing
NMLS SAFE Mortgage Loan Originator MLO
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the SAFE MLO Test
Exam Overview
2 Chapter 1: Federal Mortgage Related Laws
1.1 RESPA (Real Estate Settlement Procedures Act) 1.2 TILA (Truth in Lending Act) 1.3 ECOA (Equal Credit Opportunity Act) 1.4 Fair Housing Act 1.5 FCRA (Fair Credit Reporting Act) 1.6 HMDA (Home Mortgage Disclosure Act) 1.7 SAFE Act (Secure and Fair Enforcement) 1.8 TRID (TILA-RESPA Integrated Disclosure) 1.9 High-Cost Mortgages (HOEPA) 1.10 Bank Secrecy Act and Anti-Money Laundering (BSA/AML) 1.11 Gramm-Leach-Bliley Act (GLBA) Privacy
3 Chapter 2: Uniform State Content
2.1 State Regulatory Authority 2.2 Licensing Requirements 2.3 Continuing Education 2.4 NMLS Registry 2.5 Temporary Authority
4 Chapter 3: General Mortgage Knowledge
3.1 Mortgage Products and Types 3.2 Government Loan Programs 3.3 Underwriting Guidelines 3.4 Credit Analysis 3.5 Property Valuation 3.6 Mortgage Industry Terminology
5 Chapter 4: Mortgage Loan Origination Activities
4.1 Application Process 4.2 Processing and Documentation 4.3 Loan Estimates and Closing Disclosures 4.4 Rate Locks and Pricing 4.5 Closing Procedures 4.6 Qualification and Underwriting 4.7 Financial Calculations
6 Chapter 5: Ethics
5.1 Financial Responsibility 5.2 Fair Lending Practices 5.3 Fraud Prevention 5.4 Consumer Protection 5.5 Professional Conduct 5.6 NMLS Disciplinary Actions
4.4 Rate Locks and Pricing
Key Takeaways Explain This Topic AI
A rate lock is an agreement between the lender and borrower that guarantees a specific interest rate for a set period
Common lock periods are 15, 30, 45, and 60 days, with longer locks typically having higher rates
Lock fees may be charged upfront and may be refundable if the loan closes within the lock period
Float-down options allow borrowers to reduce their locked rate if market rates decline significantly
Discount points lower the interest rate (1 point = 1% of the loan amount; the lender sets the rate reduction per point)
- Lender credits increase the rate but reduce closing costs, providing the opposite of discount points
- Last updated: October 2026
Understanding rate locks and loan pricing is essential for MLOs. These concepts directly impact the borrower's final interest rate and closing costs, and misunderstanding them can lead to compliance issues and unhappy customers.
What is a Rate Lock?
A rate lock (also called a rate commitment or lock-in) is an agreement between the lender and borrower that guarantees a specific interest rate for a specified period of time.
Key Components of a Rate Lock
- Component Description
- Lock Date The date the rate is locked
- Lock Period Duration the rate is guaranteed (e.g., 30 days)
- Locked Rate The guaranteed interest rate
- Locked Points Discount points or credits included
- Lock Expiration Date when the lock expires
- Common Lock Periods
- Lock Period Typical Use
- 15 days Refinances with minimal conditions
- 30 days Standard purchase or refinance
- 45 days Purchase with potential delays
- 60 days New construction or complex transactions
- 90+ days Extended construction or builder programs
Important: Longer lock periods generally come with higher interest rates because the lender assumes more market risk.
Lock Period Pricing
Lenders use a tiered pricing structure based on lock period length. This reflects the lender's risk that rates may change during the lock period.
Example Rate Sheet Pricing
- Lock Period Rate Points
- 15 days 6.500% 0.000
- 30 days 6.500% 0.125
- 45 days 6.500% 0.250
- 60 days 6.500% 0.375
Or equivalently, longer locks may show higher rates for zero points:
- Lock Period Rate at 0 Points
- 15 days 6.375%
- 30 days 6.500%
- 45 days 6.625%
- 60 days 6.750%
- Lock Fees
Some lenders charge lock fees to secure a rate. Understanding lock fee policies is important:
Types of Lock Fees
- Fee Type Description
- Upfront lock fee Charged when rate is locked, may be refundable
- Lock extension fee Charged if lock needs to be extended
- Relock fee Charged if lock expires and new lock is needed
- Refundability
- Refundable lock fees are returned if the loan closes within the lock period
- Non-refundable lock fees are kept by the lender regardless of outcome
- Many lenders do not charge lock fees for standard lock periods
- Float-Down Options
A float-down (or float-down option ) allows a borrower who has locked a rate to reduce that rate if market rates decline significantly before closing.
- How Float-Downs Work
- Borrower locks rate at 6.500%
- Market rates drop to 6.125%
- Borrower exercises float-down
- New locked rate is 6.250% (typically splits the difference)
- Float-Down Rules
- Aspect Common Rule
- Timing Can only be exercised once
- Rate drop required Typically 0.25% - 0.50% decline needed
- New rate Usually split between original lock and current market
- Cost May include fee or slightly higher rate
- Float-Down vs. Floating
- Float-Down Floating
- Rate is locked but can be lowered No rate lock in place
- Protected from rate increases Exposed to rate increases
- One-time adjustment Can lock at any time
- May have restrictions Full flexibility until lock
- Rate Sheets and Pricing
MLOs work with rate sheets that show available rates and their associated costs or credits.
Reading a Rate Sheet
A typical rate sheet shows:
Interest Rates: Listed vertically (e.g., 6.000%, 6.125%, 6.250%, etc.) Lock Periods: Listed horizontally (e.g., 15-day, 30-day, 45-day) Pricing: Shown as positive numbers (points paid) or negative numbers (credits received)
Example Rate Sheet
- Rate 15-Day 30-Day 45-Day
- 6.000% 1.500 1.625 1.750
- 6.125% 1.000 1.125 1.250
- 6.250% 0.500 0.625 0.750
- 6.375% 0.000 0.125 0.250
- 6.500% (0.500) (0.375) (0.250)
- 6.625% (1.000) (0.875) (0.750)
Reading the example:
- At 6.000% with 30-day lock: Borrower pays 1.625 points
- At 6.375% with 30-day lock: Borrower pays 0.125 points (essentially par)
- At 6.500% with 30-day lock: Borrower receives 0.375 points as credit (negative = credit to borrower)
- Discount Points and Lender Credits
Discount points and lender credits allow borrowers to customize their rate and closing cost structure.
Discount Points
Discount points are prepaid interest paid at closing to reduce the interest rate.
Key facts about discount points:
- 1 point = 1% of the loan amount
- How much each point reduces the rate is set by the lender's pricing
- Points are tax-deductible interest (consult tax advisor)
- Best for borrowers who will keep the loan long-term
Example:
- Loan amount: $400,000
- 1 discount point = $4,000
- Rate reduction quoted by the lender: 6.500% to 6.250% (30-year fixed)
- Monthly principal and interest savings: approximately $65
- Break-even: approximately 61 months (about 5 years)
- Lender Credits
Lender credits are the opposite of discount points. The borrower accepts a higher rate in exchange for reduced closing costs.
Key facts about lender credits:
- Higher rate = lender provides credit toward closing costs
- Good for borrowers who want to minimize cash to close
- Good for borrowers who plan to refinance or move within a few years
- Credit cannot exceed actual closing costs (no cash back to borrower)
Example:
- At 6.500%: Borrower receives $1,500 credit toward closing costs
- At 6.375%: No points, no credits (par pricing)
- At 6.250%: Borrower pays $1,500 in discount points
- Yield Spread Premium (YSP) - Historical Context
Yield Spread Premium (YSP) was compensation paid by lenders to mortgage brokers for delivering loans above the par rate. Under current regulations, YSP is now disclosed as lender credits on the Loan Estimate and Closing Disclosure.
- How YSP Worked
- Par rate (lender's base rate): 6.000%
- Broker delivers loan at 6.500%
- Lender pays broker YSP (percentage of loan amount)
- This compensated broker instead of borrower paying direct fees
- Current Disclosure
Under TRID, lender compensation to brokers appears in Section A (Origination Charges) of the Loan Estimate and Closing Disclosure. The total compensation must be disclosed, and brokers cannot receive compensation from both borrower and lender on the same transaction.
- Lock Policies and Procedures
- When to Lock
As an MLO, you should discuss lock timing with borrowers:
- Market Condition Strategy
- Rising rates Lock early to protect rate
- Falling rates Consider floating or float-down
- Volatile market Lock for security
- Extended closing Need longer lock period
- Lock Confirmation
When a rate is locked, the lender should provide:
- Lock confirmation in writing
- Locked rate and points clearly stated
- Lock expiration date
- Conditions that must be met
- Lock Expiration
If a lock expires before closing:
- Borrower may need to relock at current rates
- Extension fees may apply
- Lender is not obligated to honor expired lock
- Document the reason for delay in loan file
- Compliance Considerations
- Accurate Rate Quotes
MLOs must:
- Quote rates accurately from current rate sheets
- Disclose lock costs and fees
- Explain float vs. lock trade-offs
- Not guarantee rates that cannot be delivered
- Anti-Steering Provisions
Under the Loan Originator Compensation Rule:
- MLO compensation cannot vary based on loan terms
- Must present loan options that are in borrower's interest
- Cannot steer borrowers to loans that benefit MLO at borrower's expense
- Lock Documentation
All lock agreements should be documented:
- Lock request and confirmation
- Any changes or extensions
- Borrower acknowledgment of lock terms
- Float-down elections (if applicable)
- Exam Tips for Rate Locks
For the SAFE MLO Test, remember:
- Rate lock = agreement guaranteeing rate for specific period
- Longer locks = higher rates or more points
- Float-down = option to lower locked rate if market drops
- Discount points = pay upfront to lower rate (1 point = 1% of loan)
- Lender credits = higher rate in exchange for reduced closing costs
- YSP is now disclosed as broker compensation on LE and CD
- MLO compensation cannot vary based on loan terms
- Lock must be in writing with clear terms