Study guide

6.2 Frame Styles & Anatomy

ABO NOCE National Opticianry Competency Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Ophthalmic Optics Terminology & Prescriptions

1.1 Ophthalmic Optics Terminology 1.2 Prescription Interpretation & Transposition 1.3 Measurement Systems & Conversions

2 Chapter 2: Lens Characteristics & Calculations

2.1 Lens Characteristics & Powers 2.2 Lens Formulas 2.3 Usable Accommodation & Range of Vision

3 Chapter 3: Prism, Decentration & Vertex Distance

Section 3.1: Prismatic Effects & Prentice's Rule Section 3.2: Decentration & Vertical Imbalance Section 3.3: Vertex Distance Compensation

4 Chapter 4: Ocular Anatomy & Physiology

4.1 Anatomy of the Eye 4.2 Physiology of Vision & Accommodation 4.3 Refractive Errors

5 Chapter 5: Ocular Pathology & Clinical Cues

5.1 Common Ocular Pathologies 5.2 Scope of Practice & Referral Cues 5.3 Visual Acuity & Testing Basics

6 Chapter 6: Frame Anatomy & Styles

6.1 Frame Materials 6.2 Frame Styles & Anatomy 6.3 Frame Selection for Prescriptions

7 Chapter 7: Lens Materials & Designs

7.1 Lens Materials Comparison 7.2 Multifocal & Trifocal Lenses 7.3 Aspheric & Digitally Surfaced Lenses

8 Chapter 8: Progressive Lenses & Coatings

Section 8.1: Progressive Addition Lenses Section 8.2: Lens Coatings Section 8.3: Lens Tints & Photochromics

9 Chapter 9: Specialty Products & Low Vision

9.1 Low Vision Aids 9.2 Safety Eyewear 9.3 Sports & Occupational Eyewear 9.4 Preassembled Eyewear & OTC Readers

10 Chapter 10: Manual Lensmetry

10.1 Lensmeter Operation & Verification 10.2 Verifying Cylinder Axis & Power 10.3 Measuring Prism on the Lensmeter

11 Chapter 11: Optical Measurement Instruments

11.1 Automated Lensmeters & Calibration 11.2 Lens Clock & Base Curves 11.3 Calipers, Thickness Gauges & PD Tools

12 Chapter 12: Dispensing Tools & Vertex Measurement

12.1 Dispensing Hand Tools 12.2 Distometer & Vertex Distance 12.3 Instrument Safety & Calibration

13 Chapter 13: Patient Measurements & History

13.1 Patient History & Needs Analysis 13.2 Measuring Pupillary Distance 13.3 Measuring Segment Height

14 Chapter 14: Frame Fitting & Troubleshooting

Section 14.1: Nosepad & Bridge Adjustments Section 14.2: Temple & Ear Adjustments Section 14.3: Troubleshooting Visual Complaints

15 Chapter 15: Laws, Regulations & Standards

15.1 ANSI Z80.1 Prescription Tolerances 15.2 ANSI Z87.1 & FDA Safety Regulations 15.3 FTC Eyeglass Rule & Professional Ethics 15.4 Universal Precautions, Coding, Insurance & FCLCA

6.2 Frame Styles & Anatomy

Key Takeaways Explain This Topic AI

The three main frame styles are full-rim (maximum stability), semi-rimless (grooved, suspended by nylon wire), and rimless (drill-mount, minimal weight).

Rimless frames require high-impact lens materials (polycarbonate or Trivex) because the structural components mount directly through drilled holes in the lenses.

Keyhole bridges rest on the sides of the nose, making them ideal for flat bridges, while saddle bridges distribute weight evenly across the entire bridge.

Temple styles include skull (standard bend), library (straight temporal grip), comfort cable (full wrap-around), and convertible (straight or bendable).

Adjustable nosepad arms allow the optician to customize the height, vertex distance, and pantoscopic tilt of the frame on the patient's face.

Last updated: July 2026

  • 6.2 Frame Styles & Anatomy
  • Classification of Frame Styles

Ophthalmic frames are designed in several structural formats that dictate how the lenses are secured. The three primary styles are full-rim, semi-rimless, and rimless.

Full-Rim Frames

Full-rim frames completely surround the periphery of the lenses. They are typically made of plastic or metal and offer the highest level of structural stability.

Advantages: Full-rim frames are excellent for hiding thick lens edges (especially high-minus lenses) and protecting the lens from chipping. They are also the easiest to glaze (insert lenses into) because the lenses are held in place by a bevel matching a groove in the frame eyewire.

Disadvantages: They are heavier than semi-rimless or rimless designs and present a more noticeable visual boundary for the wearer.

Semi-Rimless (Grooved) Frames

Semi-rimless frames (often called grooved frames or nylon-suspension frames) feature a solid metal or plastic upper chassis, while the bottom of the lens is suspended by a thin nylon monofilament wire.

Mechanism: The edge of the lens must be cut with a specialized groove (using a lens groover) during the finishing process. The nylon wire fits securely inside this groove, holding the lens against the top rim.

Advantages: They are lighter than full-rim frames and offer a less obstructed downward field of view.

Disadvantages: The exposed lens edges are prone to chipping if the wearer drops the glasses or bumps them. Hard lens materials like standard plastic (CR-39) are more susceptible to chipping; thus, impact-resistant materials are highly recommended.

Rimless (Drill-Mount) Frames

Rimless frames , or drill-mount frames , consist of three separate metal components: a bridge and two temple assemblies (endpieces). These components are mounted directly to the lenses.

Mechanism: Holes are drilled directly through the lenses. Screws, nuts, washers, or plastic compression sleeves (bushings) are used to secure the metal parts to the lens.

Material Constraints: Because the structural integrity of the eyewear relies entirely on the lenses, impact-resistant lens materials such as polycarbonate or Trivex are mandatory. Standard CR-39 plastic and high-index glass are too brittle and will crack at the drill holes under stress.

Advantages: They are extremely lightweight, virtually invisible on the face, and offer an unobstructed field of view.

Anatomy of a Spectacle Frame

To properly fit, adjust, and troubleshoot eyewear, an optician must master the terminology of frame parts.

Loading diagram...

Component Breakdown

Eyewire (Rim): The part of the frame front that surrounds and holds the lens in place.

Bridge: The central portion of the frame front that rests on the nose and connects the two eyewires.

Endpieces: The outer temporal corners of the frame front where the temples attach.

Shield: A decorative metal plate found on the front or side of some plastic frames that hides the rivets securing the hinge to the frame.

Hinges: The joints that connect the temples to the endpieces, allowing the temples to fold inward.

Standard Hinges: Use interlocking barrels (usually 3, 5, or 7 barrels) secured by a screw.

Spring Hinges: Contain an internal spring mechanism that allows the temples to flex outward beyond 90 degrees. This reduces frame warpage and increases comfort for patients with wider heads.

Temples: The side shafts of the frame that extend over the ears to hold the glasses in position.

Nosepad Assembly: On metal frames, this includes the nosepad arms (adjustable metal wires) and the nosepads (plastic, silicone, or glass pads that rest on the nose).

Bridge Styles

The shape of the bridge determines how the weight of the frame is distributed across the nasal crest and slopes.

Bridge Type Visual Appearance Weight Distribution Ideal Patient

Saddle Bridge Follows the curve of the nose in a continuous arch. Evenly across the top and sides of the nasal bridge. Patients with sensitive skin or heavy lenses.

Keyhole Bridge Shaped like an old-fashioned keyhole, open at the top. Exclusively on the sides of the nose; does not touch the crest. Patients with low, flat bridges or wide nasal crests.

Modified Saddle A saddle shape with built-in nosepad tabs on the back. Combines the look of a saddle with localized support. Most plastic frame wearers wanting a classic look.

Comfort Bridge A clear silicone or plastic saddle insert on a metal frame. Distributes metal frame weight over a larger surface area. Patients who find individual metal pads uncomfortable.

Saddle Bridge: By spreading the frame's weight over a larger surface area, a saddle bridge minimizes pressure points.

Keyhole Bridge: The bridge arches over the top of the nose, touching only the sides. This is an excellent style for lengthening the visual appearance of the nose or for patients with a sensitive nasal crest.

Modified Saddle Bridge: This hybrid design features molded plastic pads that sit further down on the nose, helping to prevent the frame from sliding down.

Temple Styles

Temples are selected based on the patient's lifestyle, occupational needs, and head shape.

Skull Temples: The most common temple type. The shaft runs straight back, then bends downward behind the ear, hugging the contour of the skull. They are comfortable for daily wear and easy to adjust.

Library Temples: Straight temples that do not bend down behind the ear. Instead, they run straight back and grip the sides of the head using light temporal pressure. They are ideal for reading glasses or for patients who frequently put their glasses on and take them off.

Comfort Cable Temples: Made of flexible, wound metal cable. They wrap completely around the ear, extending down to the earlobe. They provide a very secure fit, making them perfect for children, active sports players, and patients with heavy prescriptions.

Convertible Temples: Feature a straight temple shaft that can be custom-bent by the optician to act as a skull temple. They offer versatility in inventory for optical shops.