Study guide
4.3 Refractive Errors
ABO NOCE National Opticianry Competency Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ophthalmic Optics Terminology & Prescriptions
1.1 Ophthalmic Optics Terminology 1.2 Prescription Interpretation & Transposition 1.3 Measurement Systems & Conversions
2 Chapter 2: Lens Characteristics & Calculations
2.1 Lens Characteristics & Powers 2.2 Lens Formulas 2.3 Usable Accommodation & Range of Vision
3 Chapter 3: Prism, Decentration & Vertex Distance
Section 3.1: Prismatic Effects & Prentice's Rule Section 3.2: Decentration & Vertical Imbalance Section 3.3: Vertex Distance Compensation
4 Chapter 4: Ocular Anatomy & Physiology
4.1 Anatomy of the Eye 4.2 Physiology of Vision & Accommodation 4.3 Refractive Errors
5 Chapter 5: Ocular Pathology & Clinical Cues
5.1 Common Ocular Pathologies 5.2 Scope of Practice & Referral Cues 5.3 Visual Acuity & Testing Basics
6 Chapter 6: Frame Anatomy & Styles
6.1 Frame Materials 6.2 Frame Styles & Anatomy 6.3 Frame Selection for Prescriptions
7 Chapter 7: Lens Materials & Designs
7.1 Lens Materials Comparison 7.2 Multifocal & Trifocal Lenses 7.3 Aspheric & Digitally Surfaced Lenses
8 Chapter 8: Progressive Lenses & Coatings
Section 8.1: Progressive Addition Lenses Section 8.2: Lens Coatings Section 8.3: Lens Tints & Photochromics
9 Chapter 9: Specialty Products & Low Vision
9.1 Low Vision Aids 9.2 Safety Eyewear 9.3 Sports & Occupational Eyewear 9.4 Preassembled Eyewear & OTC Readers
10 Chapter 10: Manual Lensmetry
10.1 Lensmeter Operation & Verification 10.2 Verifying Cylinder Axis & Power 10.3 Measuring Prism on the Lensmeter
11 Chapter 11: Optical Measurement Instruments
11.1 Automated Lensmeters & Calibration 11.2 Lens Clock & Base Curves 11.3 Calipers, Thickness Gauges & PD Tools
12 Chapter 12: Dispensing Tools & Vertex Measurement
12.1 Dispensing Hand Tools 12.2 Distometer & Vertex Distance 12.3 Instrument Safety & Calibration
13 Chapter 13: Patient Measurements & History
13.1 Patient History & Needs Analysis 13.2 Measuring Pupillary Distance 13.3 Measuring Segment Height
14 Chapter 14: Frame Fitting & Troubleshooting
Section 14.1: Nosepad & Bridge Adjustments Section 14.2: Temple & Ear Adjustments Section 14.3: Troubleshooting Visual Complaints
15 Chapter 15: Laws, Regulations & Standards
15.1 ANSI Z80.1 Prescription Tolerances 15.2 ANSI Z87.1 & FDA Safety Regulations 15.3 FTC Eyeglass Rule & Professional Ethics 15.4 Universal Precautions, Coding, Insurance & FCLCA
4.3 Refractive Errors
Key Takeaways Explain This Topic AI
Myopia (nearsightedness) occurs when the eye is too long or the optics are too strong, causing light to focus in front of the retina; it is corrected with a minus (diverging) lens.
Hyperopia (farsightedness) occurs when the eye is too short or the optics are too weak, causing light to focus behind the retina; it is corrected with a plus (converging) lens.
Astigmatism is caused by an asymmetrical curvature of the cornea or lens, creating two separate focal lines; it is corrected with a cylindrical lens.
Presbyopia is the age-related loss of crystalline lens elasticity, reducing the ability to accommodate; it is corrected with plus Add power.
Anisometropia is a difference in refractive error of 1.00 D or more between the eyes, which can lead to vertical imbalance or amblyopia if untreated.
Last updated: July 2026
4.3 Refractive Errors
In an ideal eye, known as an emmetropic eye, the refractive power of the cornea and crystalline lens matches the axial length of the eyeball. When accommodation is fully relaxed, parallel light rays entering the emmetropic eye from a distant object focus exactly on the photoreceptors of the retina, resulting in a clear image. When there is a mismatch between the focusing power of the optical media and the physical length of the eye, a refractive error or ametropia exists. The four primary refractive errors are myopia , hyperopia , astigmatism , and presbyopia . An additional clinical condition is anisometropia .
Myopia (Nearsightedness)
Myopia is a refractive condition where near objects can be seen clearly, but distant objects appear blurry. This occurs because the eye's refractive power is too strong relative to its axial length.
Anatomical Causes : Myopia can be classified as axial myopia (where the eyeball is physically too long from front to back) or refractive myopia (where the eyeball is of normal length, but the cornea is too steep or the crystalline lens has too much plus power).
Focal Point : Because the eye is too long or the optics are too strong, parallel light rays from infinity are focused to a point in front of the retina in the vitreous humor. By the time these light rays reach the retina, they have crossed and diverged, forming a blurry circle of confusion.
Correction : Myopia is corrected using a minus (diverging) spherical lens . A minus lens diverges the incoming parallel light rays before they enter the eye, moving the focal point backward until it aligns exactly on the retina.
Hyperopia (Farsightedness)
Hyperopia is a refractive condition where parallel light rays from infinity focus at a theoretical point behind the retina when accommodation is fully relaxed.
Anatomical Causes : Hyperopia can be axial hyperopia (where the eyeball is physically too short) or refractive hyperopia (where the eyeball length is normal, but the cornea is too flat or the crystalline lens is too weak).
Focal Point : Since the eye is too short or the optics are too weak, the incoming light rays do not bend enough to focus by the time they reach the retina.
Accommodation in Hyperopia : A young hyperopic patient can often use their own accommodation (contracting the ciliary muscle to round the crystalline lens) to bring distant objects into focus. However, this constant accommodative effort can lead to eye strain, headaches, and fatigue, especially during near tasks when the demand is even higher.
Correction : Hyperopia is corrected using a plus (converging) spherical lens . A plus lens converges the incoming light rays before they enter the eye, helping the eye's weak optical system bend the rays enough to focus them forward onto the retina.
Astigmatism
Astigmatism is a refractive condition where the light rays entering the eye do not focus at a single point, but instead form two separate focal lines. This occurs when the refractive surfaces of the eye, typically the cornea, have an irregular, non-spherical curvature.
Anatomical Causes : Instead of being shaped like a spherical ball (like a basketball), an astigmatic cornea is curved more steeply in one meridian and flatter in the perpendicular meridian (like a football). Astigmatism can also be caused by an irregular curvature of the crystalline lens ( lenticular astigmatism ).
Focal Lines : The two primary meridians of refractive power (which are 90 degrees apart in regular astigmatism ) focus light at different distances, creating a range of focus known as the Interval of Sturm .
Correction : Astigmatism is corrected using a cylindrical lens (or a spherocylindrical lens ). The cylindrical component of the lens has power in only one meridian, which is aligned to correct the error of the corresponding meridian in the eye, collapsing the two focal lines into a single focal point.
Presbyopia
Presbyopia is the gradual, age-related loss of the eye's ability to accommodate for near tasks. Unlike myopia, hyperopia, and astigmatism, which are refractive errors related to the shape of the eye, presbyopia is a physiological, progressive condition that affects everyone, typically becoming clinically noticeable between the ages of 40 and 45.
Anatomical Causes : As the eye ages, the protein structure of the crystalline lens changes, making the lens fibers harder, denser, and less elastic. At the same time, the lens capsule becomes less flexible. Even though the ciliary muscle still contracts, the rigid lens can no longer round up or increase its curvature.
Symptoms : Patients experience difficulty reading small print, hold materials at arm's length to see them clearly, and complain of eye strain or headaches during close work.
Correction : Presbyopia is corrected by adding plus power (an Add power ) to the patient's distance prescription. This is accomplished using reading glasses, bifocals , trifocals , or progressive addition lenses (PALs) . The plus lens acts as a substitute for the lost accommodation, focusing diverging rays from near objects onto the retina.
Anisometropia
Anisometropia is a clinical condition characterized by a significant difference in refractive error between the two eyes.
Clinical Significance : A difference of 1.00 diopter or more is considered clinically significant.
Challenges :
Aniseikonia : A difference in the perceived size of images between the two eyes, which can disrupt binocular fusion and cause headaches or double vision.
Prismatic Vertical Imbalance : When a patient wears spectacle lenses with different powers in each eye and looks down through the reading portion of the lens, the different lens powers induce unequal amounts of vertical prism (according to Prentice's Rule). This causes vertical diplopia and reading discomfort.
Amblyopia : In children, if one eye has a much higher uncorrected refractive error than the other, the brain may suppress the blurry image from that eye, leading to a permanent developmental loss of visual acuity in that eye, a condition known as amblyopia (lazy eye).
Comparison of Refractive States
- Refractive State Common Name Primary Anatomical Cause Focal Point (Accommodation Relaxed) Corrective Lens Type
- Emmetropia Normal Vision Perfect match of axial length and power Exactly on the retina None needed
- Myopia Nearsightedness Eyeball too long or cornea too steep In front of the retina Minus (Diverging) Spherical
Hyperopia Farsightedness Eyeball too short or cornea too flat Behind the retina (theoretical) Plus (Converging) Spherical
Astigmatism Astigmatism Toric (football-shaped) cornea or lens Two focal lines (Interval of Sturm) Cylindrical / Spherocylindrical
Presbyopia Aging Eyes Hardening / loss of elasticity in crystalline lens Behind the retina at near Plus (Add) Power (Multifocals/PALs)
Anisometropia Unequal Refraction Significant difference in power between eyes Varies per eye (causes aniseikonia) Different lens powers per eye