Study guide
9.2 Safety Eyewear
ABO NOCE National Opticianry Competency Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ophthalmic Optics Terminology & Prescriptions
1.1 Ophthalmic Optics Terminology 1.2 Prescription Interpretation & Transposition 1.3 Measurement Systems & Conversions
2 Chapter 2: Lens Characteristics & Calculations
2.1 Lens Characteristics & Powers 2.2 Lens Formulas 2.3 Usable Accommodation & Range of Vision
3 Chapter 3: Prism, Decentration & Vertex Distance
Section 3.1: Prismatic Effects & Prentice's Rule Section 3.2: Decentration & Vertical Imbalance Section 3.3: Vertex Distance Compensation
4 Chapter 4: Ocular Anatomy & Physiology
4.1 Anatomy of the Eye 4.2 Physiology of Vision & Accommodation 4.3 Refractive Errors
5 Chapter 5: Ocular Pathology & Clinical Cues
5.1 Common Ocular Pathologies 5.2 Scope of Practice & Referral Cues 5.3 Visual Acuity & Testing Basics
6 Chapter 6: Frame Anatomy & Styles
6.1 Frame Materials 6.2 Frame Styles & Anatomy 6.3 Frame Selection for Prescriptions
7 Chapter 7: Lens Materials & Designs
7.1 Lens Materials Comparison 7.2 Multifocal & Trifocal Lenses 7.3 Aspheric & Digitally Surfaced Lenses
8 Chapter 8: Progressive Lenses & Coatings
Section 8.1: Progressive Addition Lenses Section 8.2: Lens Coatings Section 8.3: Lens Tints & Photochromics
9 Chapter 9: Specialty Products & Low Vision
9.1 Low Vision Aids 9.2 Safety Eyewear 9.3 Sports & Occupational Eyewear 9.4 Preassembled Eyewear & OTC Readers
10 Chapter 10: Manual Lensmetry
10.1 Lensmeter Operation & Verification 10.2 Verifying Cylinder Axis & Power 10.3 Measuring Prism on the Lensmeter
11 Chapter 11: Optical Measurement Instruments
11.1 Automated Lensmeters & Calibration 11.2 Lens Clock & Base Curves 11.3 Calipers, Thickness Gauges & PD Tools
12 Chapter 12: Dispensing Tools & Vertex Measurement
12.1 Dispensing Hand Tools 12.2 Distometer & Vertex Distance 12.3 Instrument Safety & Calibration
13 Chapter 13: Patient Measurements & History
13.1 Patient History & Needs Analysis 13.2 Measuring Pupillary Distance 13.3 Measuring Segment Height
14 Chapter 14: Frame Fitting & Troubleshooting
Section 14.1: Nosepad & Bridge Adjustments Section 14.2: Temple & Ear Adjustments Section 14.3: Troubleshooting Visual Complaints
15 Chapter 15: Laws, Regulations & Standards
15.1 ANSI Z80.1 Prescription Tolerances 15.2 ANSI Z87.1 & FDA Safety Regulations 15.3 FTC Eyeglass Rule & Professional Ethics 15.4 Universal Precautions, Coding, Insurance & FCLCA
9.2 Safety Eyewear
Key Takeaways Explain This Topic AI
Occupational safety eyewear is regulated under the ANSI Z87.1 standard, separating eyewear into Basic Impact and High Impact categories.
Basic-impact safety lenses require a minimum center thickness of 3.0 mm (or 2.5 mm for prescriptions >= +3.00 D) and must pass a 1-inch steel ball drop-test.
High-impact safety lenses (marked with a + symbol) require a minimum center thickness of 2.0 mm for polycarbonate/Trivex and must pass high-velocity impact tests.
The FDA dress eyewear drop-ball test uses a 5/8-inch steel ball dropped from 50 inches; glass dress lenses require 100% individual testing, while plastic lenses can be batch-tested.
Safety frames must be marked with Z87-2 (prescription safety frame) and a + symbol (high impact) on the front and temples, along with approved side shields for lateral protection.
Last updated: July 2026
- 9.2 Safety Eyewear
- Industrial Safety Standards: ANSI Z87.1
In the United States, safety eyewear is not merely a product category but a highly regulated system of protection governed by the American National Standards Institute (ANSI) Z87.1 standard. This standard defines the design, testing, marking, and usage requirements for occupational and educational personal eye and face protection devices. Unlike dress (everyday) eyewear, safety eyewear is engineered to protect workers from specific industrial hazards, including flying projectiles, chemical splashes, dust, and optical radiation.
Opticians play a critical role in safety compliance. They must ensure that the lenses and frames dispensed match the safety level required by the wearer’s employer or work environment. Under ANSI Z87.1, safety eyewear is divided into two primary performance tiers: Basic Impact and High Impact . Both frames and lenses are tested and certified to these standards.
Basic Impact vs. High Impact Standards
The distinction between Basic Impact and High Impact safety eyewear involves different test methods and lens thickness requirements.
Basic Impact Safety Eyewear (Z87)
Basic Impact eyewear is designed for environments with lower risks of high-velocity flying debris.
Testing Protocol : Lenses are subjected to the Z87 Drop-Ball Test . A 1-inch (25.4 mm) steel ball is dropped from a height of 50 inches (127 cm) onto the front surface of the lens. The lens must not crack, chip, shatter, or dislodge from the safety frame. (Note that the Z87 drop-ball test uses a much larger and heavier ball than the standard FDA dress lens test).
Thickness Requirements : To withstand this impact, basic safety lenses must have a minimum center thickness of 3.0 mm for all materials. The only exception is for prescription lenses with a plus power of +3.00 D or greater, which may have a reduced center thickness of 2.5 mm .
Markings : Basic safety frames are marked with Z87 on the front and temples. Lenses are marked only with the manufacturer's logo or trademark.
High Impact Safety Eyewear (Z87+)
High Impact eyewear is designed for high-risk industrial environments (e.g., machining, grinding, woodworking).
Testing Protocol : High-impact lenses and frames must undergo two rigorous tests:
High-Velocity Impact Test : A 1/4-inch (6.35 mm) steel ball is shot at the lens at a speed of 150 feet per second (fps) , which is approximately 102 miles per hour. The safety frame (without lenses, using plano test lenses) must withstand a 1/4-inch steel ball shot at 250 feet per second .
High-Mass Impact Test : A pointed, 1-pound (454 g) steel projectile is dropped from a height of 50 inches (127 cm) through a tube onto the lens mounted in the frame. This test ensures the frame can retain the lens and resist heavy, blunt forces without collapsing.
Thickness Requirements : Because high-impact materials are highly flexible and shatter-resistant, lenses made of polycarbonate or Trivex are permitted to have a minimum center thickness of 2.0 mm . However, if high-impact glass or basic plastic (CR-39) is used, the minimum thickness must remain 3.0 mm . Polycarbonate is the industry standard for safety due to its inherent impact resistance and built-in UV protection.
Markings : High-impact safety frames are marked with Z87+ (or Z87-2+ for prescription frames). Lenses must be marked with the manufacturer's logo followed by a plus sign (+) (e.g., "XY+").
The FDA Drop-Ball Test for Dress Eyewear
To understand the rigor of safety eyewear, opticians must contrast it with the Food and Drug Administration (FDA) impact resistance regulation for dress (everyday) eyewear under 21 CFR 801.410 .
The FDA requires all dress spectacles and sunglasses sold to the public to be impact-resistant.
Testing Protocol : The standard dress lens test utilizes a 5/8-inch (15.9 mm) steel ball weighing approximately 0.56 ounces (16 grams) . The ball is dropped from a height of 50 inches (127 cm) onto the front surface of the lens. The lens must not fracture or crack.
Exemptions : Specialty lenses that could be damaged by the test (such as laminated lenses, plastic lenses in some circumstances, or custom prescription designs) can be exempted, but they must still meet equivalent safety profiles. In modern practice, plastic dress lenses (CR-39, polycarbonate, Trivex) are rarely individually tested.
Testing Frequency :
Glass Lenses : Glass is a brittle material. Therefore, the FDA mandates 100% individual testing . Every single glass dress lens must be individually drop-ball tested after undergoing chemical or thermal tempering.
Plastic Lenses (CR-39, Polycarbonate, Trivex) : These materials are inherently more flexible. The FDA allows batch testing (statistical sampling of a manufactured lot) rather than testing every individual lens.
- Feature FDA Dress Eyewear Z87 Basic Safety Z87+ High Impact Safety
- Drop-Ball Size 5/8-inch steel ball (0.56 oz) 1-inch steel ball (8.0 oz) 1/4-inch steel ball (high velocity)
- Drop Height / Speed 50 inches 50 inches 150 feet per second (lenses)
Min. Center Thickness No legal minimum (typical 2.0mm) 3.0 mm (2.5mm if Rx >= +3.00D) 2.0 mm (polycarbonate/Trivex)
- Frame Testing None None High-mass & High-velocity (250 fps)
- Material Preference Any (CR-39, Glass, Poly) Glass, CR-39, Poly Polycarbonate, Trivex
- Safety Markings and Compliance
ANSI Z87.1 requires permanent and legible markings on both the frame and the lenses to ensure compliance. If a frame or lens lacks these markings, it cannot be legally distributed or used as occupational safety eyewear.
Frame Markings
Safety frames must contain markings on the front (bridge or eyewire) and on both temples:
Manufacturer's Mark : The logo or trademark of the manufacturer (e.g., "Uvex" or "3M").
Z87 : Indicates the frame meets the basic Z87 safety standards.
Z87-2 : Indicates the frame is certified for prescription (Rx) safety lenses (as opposed to plano safety glasses).
"+" Symbol : Placed after the Z87 marking (e.g., Z87-2+ ), indicating the frame is certified for high-impact protection.
Size Markings : Eye size (A-measurement), double bridge width (DBL), and temple length must be engraved.
Lens Markings
Safety lenses must contain markings in the upper-temporal corner, positioned so they do not interfere with the wearer's line of sight:
Manufacturer's Logo : Identifies the lens manufacturer.
"+" Symbol : Indicates the lens is high-impact rated.
Specialty Codes :
W : Welding filter (followed by a shade number from 1.3 to 14).
U : Ultra-Violet (UV) filter (followed by a scale number from 2 to 6).
L : Visible light filter (followed by a scale number from 1.3 to 10).
R : Infrared (IR) filter (followed by a scale number from 1.2 to 10).
V : Variable tint (photochromic) lens.
S : Special purpose lens.
Side Shields and Lateral Protection
A major safety hazard in industrial settings is debris flying from the side. Frontal protection alone is insufficient. Under ANSI Z87.1, safety eyewear must provide lateral (side) protection to be compliant.
Permanent vs. Removable Side Shields
Permanent Side Shields : These are molded as part of the safety frame or permanently riveted to the temples. They cannot be removed without damaging the frame. Permanent shields are preferred in high-risk environments because they eliminate the risk of the worker removing them.
Removable Side Shields : These can be slipped onto or clipped off the temples.
Critical Rule : Removable side shields must be specifically tested, certified, and marked for use with that exact frame model . An optician cannot legally place generic, unapproved slip-on side shields on a safety frame. The side shields must stay locked onto the frame and withstand the same high-velocity impact forces as the frame itself.