Study guide

Oxygenation Decisions and Delivery Devices

NREMT EMR Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: EMR Certification, Eligibility, Fees, ATT, Scoring, and Retesting

1.1 National Registry Certification and State Authorization 1.2 Initial Education and Eligibility Pathway 1.3 Application, $88 Fee, and Authorization to Test 1.4 Scheduling, Delivery, and Results 1.5 Scoring Scale and Passing Decision 1.6 Retesting, Wait Period, and Repeat Course Rule

2 2025 EMR Test Plan, CAT, TEIs, and Assessment-Flow Strategy

2.1 April 2025 Launch and 2023 BLS Practice Analysis 2.2 CAT Format, Item Count, Time Limit, and Delivery 2.3 Pilot Items and Pacing Strategy 2.4 Domain Weights and the Assessment-Flow Map 2.5 Technology-Enhanced Items 2.6 Pediatric Integration and Scenario Strategy

3 Scene Size-Up and Safety: Plan, Hazards, PPE, Triage, and Resources

3.1 Pre-Arrival Plan of Action 3.2 Hazard Recognition and Safe Entry 3.3 PPE Selection and Exposure Control 3.4 Bystanders, Crowds, and Public Safety 3.5 Multiple Patients and Triage 3.6 Resource Requests and Scene Communication

4 Primary Assessment I: General Impression, LOC, Airway, and Life Threats

4.1 Primary Assessment Priority and Rapport 4.2 General Impression and Sick-or-Not-Sick Decisions 4.3 Level of Consciousness and AVPU 4.4 Airway Patency and Positioning 4.5 Chief Complaint and Immediate Life Threats 4.6 Integrated Front-End Primary Assessment Scenarios

5 Primary Assessment II: Breathing, Circulation, Vitals, Rapid Treatment, and Transport

5.1 Breathing Status in the Primary Assessment 5.2 Circulation, Perfusion, and Major Bleeding 5.3 Baseline Vital Signs Without Delay 5.4 Diagnostic Clues from Primary Findings 5.5 Shock Cues and Early EMR Priorities 5.6 Rapid Treatment, Transport, and Resource Decisions

6 Secondary Assessment: Focused Exam, SAMPLE History, and Reassessment

6.1 Secondary Assessment in the Current Test Plan 6.2 Focused Physical Exam by Complaint 6.3 SAMPLE and OPQRST Interviewing 6.4 Past Medical History, Medications, and Baseline Function 6.5 Reassessment After Interventions 6.6 Avoiding Over-Testing and Handoff-Ready Findings

7 Treatment and Transport I: Airway, Ventilation, Oxygen, CPR, and AED

Airway Treatment in the Assessment Flow Positioning and Manual Airway Opening Suction and Basic Airway Adjuncts Oxygenation Decisions and Delivery Devices Ventilation With BVM and Rescue Breathing CPR, AED, Rapid Transport, and Handoff

8 Treatment and Transport II: Bleeding, Shock, Trauma, Medical, and Motion Restriction

Circulatory Management in Treatment and Transport External Bleeding Control and Tourniquets Recognizing and Treating Shock Trauma Patterns and Musculoskeletal Care Motion Restriction and Spine Precautions Medical Emergencies and EMR Scope Decisions

9 Treatment and Transport III: Medications, Special Populations, and Patient Handoff

9.1 Medication Scope, Safety, and Orders 9.2 Oxygen, Glucose, and Assisted Medication Tasks 9.3 Pediatric Treatment Considerations 9.4 Older Adults, Chronic Conditions, and Polypharmacy 9.5 Pregnancy, Childbirth, and Newborn Support 9.6 Transport Support and Patient Handoff

10 Operations: Equipment, Inventory, Documentation, Responder Wellbeing, and Incidents

10.1 Operations Domain and Equipment Readiness 10.2 Supplies, PPE, Cleaning, and Infection Control 10.3 Documentation and Communication 10.4 Responder Wellbeing and Scene Performance 10.5 Incident Command and Resource Coordination 10.6 MCI, Triage, and Hazmat Awareness

11 EMR Study Plan: Domain Weighting, CAT Pacing, Readiness, and Retake Plan

11.1 Five-to-Eight Week EMR Study Calendar 11.2 Domain-Weighted Practice Map 11.3 CAT Pacing and Stamina 11.4 TEI and Scenario Practice 11.5 Error Log and Remediation Loop 11.6 Readiness Gate and Retake Plan

12 Final EMR Review: Exam Week, Test Day, Recertification, and Next Steps

12.1 Final Week Checklist and Domain Triage 12.2 Pearson VUE and OnVUE Exam-Day Logistics 12.3 Check-In, NDA, Rules, and Reschedule Discipline 12.4 Results, Scoring, Certification, and State Authorization 12.5 Recertification Two-Year Cycle and 16 CE Credits 12.6 Next Steps: EMR Practice, EMT, AEMT, and Study Continuity

Oxygenation Decisions and Delivery Devices

Key Takeaways Explain This Topic AI

A nasal cannula delivers low-flow oxygen at 1–6 L/min (about 24–44% inspired oxygen) and suits patients who are mildly hypoxic and breathing adequately.

A non-rebreather mask delivers high-concentration oxygen at 10–15 L/min (about 60–90%) for seriously hypoxic patients who are still breathing adequately.

Modern guidance is to titrate oxygen to maintain SpO2 of at least 94% rather than give high-flow oxygen to everyone.

Oxygenation requires a working airway and adequate breathing — if breathing is inadequate, the patient needs ventilation (BVM), not just an oxygen mask.

Last updated: October 2026

Oxygenation Versus Ventilation

Oxygenation means getting oxygen into the blood; ventilation means moving air in and out of the lungs. The two are linked but not identical, and the difference governs every oxygen decision. An oxygen device only helps a patient who is moving air on their own — who has an adequate rate and depth (tidal volume) of breathing. If breathing is too slow, too shallow, or absent, an oxygen mask cannot push that oxygen into the lungs; that patient needs assisted ventilation with a bag-valve-mask , not a cannula.

The tested decision rule is therefore two-step:

Is the patient breathing adequately? If NO → assist ventilations (next section). If YES →

How hypoxic are they? Choose the device that matches the need and titrate to a target.

This is a common NREMT trap: a patient breathing 5 times per minute is inadequate and needs ventilation, so applying a non-rebreather alone is the wrong answer no matter how high the flow.

Matching the Device to the Patient

For a patient who is breathing adequately, the EMR selects an oxygen delivery device based on how much supplemental oxygen is needed:

  • Device Flow rate Approximate oxygen delivered Typical use
  • Nasal cannula 1–6 L/min ~24–44% Mild hypoxia, breathing well, won't tolerate a mask
  • Simple face mask 6–10 L/min ~35–60% Moderate need (EMT level on the national model)
  • Non-rebreather mask (NRB) 10–15 L/min ~60–90% Serious hypoxia, severe distress, shock, trauma
  • Bag-valve-mask (BVM) 15 L/min ~100% INADEQUATE breathing — ventilation, not just O2

The nasal cannula is comfortable and good for low-level needs, but never run it below 1 L/min or it dries the nasal passages, and above ~6 L/min it provides no added benefit and irritates. The non-rebreather has a reservoir bag that must be pre-inflated before placing it on the face, and the flow must be high enough (10–15 L/min) to keep that bag inflated as the patient inhales.

Titrate to Target, Don't Over-Oxygenate

Older teaching gave every serious patient high-flow oxygen automatically. Current evidence-based practice is to titrate oxygen to maintain an SpO2 (pulse-oximetry oxygen saturation) of at least 94% , because both hypoxia and unnecessary hyperoxia can be harmful. A patient who is satisfied with a nasal cannula at 2 L/min and reads 97% does not need a non-rebreather; conversely, a patient in shock, severe respiratory distress, or with carbon monoxide exposure should get high-flow oxygen regardless of the reading.

Always treat the patient, not just the number — pulse oximetry can read falsely in poor perfusion, cold extremities, or CO poisoning.

Worked scenario

A 60-year-old with chest pain is anxious, breathing 18 times per minute with good chest rise, and her SpO2 is 90% on room air. Because she is breathing adequately but mildly hypoxic, a reasonable start is a nasal cannula at 2–4 L/min , then recheck the SpO2 and titrate upward (to a non-rebreather at 10–15 L/min) if she stays below 94%. If, instead, she became drowsy and her breathing slowed to 6 shallow breaths per minute, the correct move would shift to assisted ventilation with a BVM at 15 L/min — oxygen flow alone cannot fix inadequate ventilation. Reassess SpO2 and work of breathing after every change.

Oxygen Safety and Special Situations

Oxygen is a drug and a hazard. It vigorously supports combustion, so no smoking, open flames, or sparks are allowed near oxygen, and cylinders must be secured so a fall does not shear the valve. EMRs should know cylinder basics: oxygen tanks are color-coded (green in the US) and a tank approaching the ~200 psi 'safe residual' should be swapped before it runs dry.

A classic tested nuance involves the patient with chronic obstructive pulmonary disease (COPD) . In rare cases, high-flow oxygen can blunt a COPD patient's respiratory drive — but the EMR rule is unambiguous: never withhold oxygen from a hypoxic patient who needs it. Give the oxygen required to reach the target saturation and watch the breathing; do not let theory talk you out of treating obvious hypoxia. For most COPD patients the saturation target is slightly lower (around 88–92%), but a clearly hypoxic or critical patient still receives high-flow oxygen.

Pulse oximetry guides titration but has limits. It can read falsely high in carbon monoxide poisoning (the device cannot tell oxygen from carbon monoxide on the hemoglobin), and falsely low or unreadable in cold, poorly perfused, or shocky patients, or with nail polish. So the EMR treats the whole patient — color, mental status, work of breathing, and the mechanism — not just the number on the screen.

Two more practical points round out EMR oxygen care. First, where a responder is authorized to use a simple face mask (an EMT-level device on the national model), it must run at a minimum of about 6 L/min so the patient's own exhaled carbon dioxide is flushed out of the mask rather than rebreathed; the national EMR devices are the nasal cannula at the low end and the non-rebreather at the high end. Second, prolonged high-flow oxygen dries and irritates the airway, so when extended delivery is expected, humidified oxygen (also EMT level on the national model) improves patient comfort.

Throughout, the cycle is the same as every other airway intervention: choose the device for the need, set the correct flow, confirm the reservoir or cannula is working, then reassess the saturation and the breathing and step the therapy up or down to keep the patient at the target.