Study guide
10.2 Supplies, PPE, Cleaning, and Infection Control
NREMT EMR Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: EMR Certification, Eligibility, Fees, ATT, Scoring, and Retesting
1.1 National Registry Certification and State Authorization 1.2 Initial Education and Eligibility Pathway 1.3 Application, $88 Fee, and Authorization to Test 1.4 Scheduling, Delivery, and Results 1.5 Scoring Scale and Passing Decision 1.6 Retesting, Wait Period, and Repeat Course Rule
2 2025 EMR Test Plan, CAT, TEIs, and Assessment-Flow Strategy
2.1 April 2025 Launch and 2023 BLS Practice Analysis 2.2 CAT Format, Item Count, Time Limit, and Delivery 2.3 Pilot Items and Pacing Strategy 2.4 Domain Weights and the Assessment-Flow Map 2.5 Technology-Enhanced Items 2.6 Pediatric Integration and Scenario Strategy
3 Scene Size-Up and Safety: Plan, Hazards, PPE, Triage, and Resources
3.1 Pre-Arrival Plan of Action 3.2 Hazard Recognition and Safe Entry 3.3 PPE Selection and Exposure Control 3.4 Bystanders, Crowds, and Public Safety 3.5 Multiple Patients and Triage 3.6 Resource Requests and Scene Communication
4 Primary Assessment I: General Impression, LOC, Airway, and Life Threats
4.1 Primary Assessment Priority and Rapport 4.2 General Impression and Sick-or-Not-Sick Decisions 4.3 Level of Consciousness and AVPU 4.4 Airway Patency and Positioning 4.5 Chief Complaint and Immediate Life Threats 4.6 Integrated Front-End Primary Assessment Scenarios
5 Primary Assessment II: Breathing, Circulation, Vitals, Rapid Treatment, and Transport
5.1 Breathing Status in the Primary Assessment 5.2 Circulation, Perfusion, and Major Bleeding 5.3 Baseline Vital Signs Without Delay 5.4 Diagnostic Clues from Primary Findings 5.5 Shock Cues and Early EMR Priorities 5.6 Rapid Treatment, Transport, and Resource Decisions
6 Secondary Assessment: Focused Exam, SAMPLE History, and Reassessment
6.1 Secondary Assessment in the Current Test Plan 6.2 Focused Physical Exam by Complaint 6.3 SAMPLE and OPQRST Interviewing 6.4 Past Medical History, Medications, and Baseline Function 6.5 Reassessment After Interventions 6.6 Avoiding Over-Testing and Handoff-Ready Findings
7 Treatment and Transport I: Airway, Ventilation, Oxygen, CPR, and AED
Airway Treatment in the Assessment Flow Positioning and Manual Airway Opening Suction and Basic Airway Adjuncts Oxygenation Decisions and Delivery Devices Ventilation With BVM and Rescue Breathing CPR, AED, Rapid Transport, and Handoff
8 Treatment and Transport II: Bleeding, Shock, Trauma, Medical, and Motion Restriction
Circulatory Management in Treatment and Transport External Bleeding Control and Tourniquets Recognizing and Treating Shock Trauma Patterns and Musculoskeletal Care Motion Restriction and Spine Precautions Medical Emergencies and EMR Scope Decisions
9 Treatment and Transport III: Medications, Special Populations, and Patient Handoff
9.1 Medication Scope, Safety, and Orders 9.2 Oxygen, Glucose, and Assisted Medication Tasks 9.3 Pediatric Treatment Considerations 9.4 Older Adults, Chronic Conditions, and Polypharmacy 9.5 Pregnancy, Childbirth, and Newborn Support 9.6 Transport Support and Patient Handoff
10 Operations: Equipment, Inventory, Documentation, Responder Wellbeing, and Incidents
10.1 Operations Domain and Equipment Readiness 10.2 Supplies, PPE, Cleaning, and Infection Control 10.3 Documentation and Communication 10.4 Responder Wellbeing and Scene Performance 10.5 Incident Command and Resource Coordination 10.6 MCI, Triage, and Hazmat Awareness
11 EMR Study Plan: Domain Weighting, CAT Pacing, Readiness, and Retake Plan
11.1 Five-to-Eight Week EMR Study Calendar 11.2 Domain-Weighted Practice Map 11.3 CAT Pacing and Stamina 11.4 TEI and Scenario Practice 11.5 Error Log and Remediation Loop 11.6 Readiness Gate and Retake Plan
12 Final EMR Review: Exam Week, Test Day, Recertification, and Next Steps
12.1 Final Week Checklist and Domain Triage 12.2 Pearson VUE and OnVUE Exam-Day Logistics 12.3 Check-In, NDA, Rules, and Reschedule Discipline 12.4 Results, Scoring, Certification, and State Authorization 12.5 Recertification Two-Year Cycle and 16 CE Credits 12.6 Next Steps: EMR Practice, EMT, AEMT, and Study Continuity
10.2 Supplies, PPE, Cleaning, and Infection Control
Key Takeaways Explain This Topic AI
Standard precautions assume every patient may be infectious; PPE choice matches the suspected exposure route, not the diagnosis.
Cleaning has a hierarchy: cleaning removes debris, disinfection kills most pathogens, and sterilization destroys all microorganisms.
Sharps go in a puncture-resistant container; regulated medical waste is bagged and disposed of per local policy, never in general trash.
Reportable exposures (needlestick, splash to mucous membranes) trigger immediate cleaning, reporting, and the system's exposure-control plan.
Last updated: June 2026
Standard Precautions and PPE Selection
Standard precautions (also called body substance isolation) mean treating every patient's blood and body fluids as potentially infectious, regardless of known diagnosis. You do not wait to learn a patient's status before protecting yourself. Personal protective equipment (PPE) is part of scene entry, not an afterthought you add once care is underway.
Match the PPE to the anticipated exposure route , not to a label:
- Anticipated exposure Minimum PPE
- Any patient contact Exam gloves
- Spurting blood, childbirth, suctioning Gloves + eye protection + face mask + gown
- Coughing patient / airborne concern (e.g., TB) Gloves + N95 respirator
- Patient with possible respiratory illness Place a surgical mask on the patient if tolerated
A common exam trap is choosing PPE based on whether the patient "looks sick." The correct logic is the task : arterial bleeding and airway suctioning create splash risk, so eye and face protection are indicated even if the patient seems stable. PPE is also donned before entering the contaminated area and removed after leaving it, and the order of removal matters — take off the most contaminated items (gloves, gown) first and clean your hands last, so you do not transfer contamination to your face or clothing while undressing.
Cleaning, Disinfection, and Waste
After a call, equipment must be returned to a safe state in a defined order. Know the hierarchy and what each level achieves:
Cleaning — soap, water, and mechanical scrubbing to remove visible blood, dirt, and debris. Always the first step; you cannot disinfect over grime.
Disinfection — a chemical agent (e.g., an EPA-registered disinfectant) that kills most pathogens on hard surfaces and reusable, non-critical equipment such as a BP cuff or backboard.
Sterilization — destroys all microorganisms, including spores; reserved for instruments that enter the body. EMRs rarely sterilize but should recognize the term.
Waste handling is tested directly:
- Item Correct disposal
- Used needle / sharp Puncture-resistant, labeled sharps container
- Blood-soaked dressings Biohazard (red) bag for regulated medical waste
- Lightly soiled glove, normal trash General waste per local policy
Never recap needles by hand and never overfill a sharps container. A contaminated or damaged supply — torn, wet, or expired packaging — is removed from service because the sterile barrier is broken and the item is no longer safe for the next patient. Expired items lose their guarantee of sterility or potency and are treated the same way: pulled and replaced, never used to save time.
Exposures, Restocking, and Scene Hazards
If you sustain an exposure — a needlestick , a splash to the eyes, nose, or mouth , or contact with non-intact skin — the steps are immediate: stop, wash the area (or flush mucous membranes copiously with water/saline), report to your supervisor, and follow the system's exposure-control plan , which may include source testing, post-exposure prophylaxis evaluation, and documentation. Time matters, so reporting is not optional or deferred.
Restocking closes the loop: after cleaning and disinfecting, replace every consumable you used or discarded so the unit is ready for the next call. This ties infection control back to equipment readiness from section 10.1 — a clean kit that is also fully stocked.
Finally, infection control overlaps scene safety . A scene with a chemical odor and multiple people reporting symptoms is not an infection-control problem you solve with gloves — it is a possible hazardous-materials scene. The correct first action is to stay out, move upwind/uphill, deny entry, and request specialized resources . PPE for routine body fluids does not protect against chemical or airborne toxic hazards, and recognizing that distinction is a frequently tested judgment.
Routes of Transmission and the Diseases Behind the Precautions
Understanding why the precautions exist makes the right answer obvious. Pathogens reach an EMR through predictable routes, and the PPE choice blocks the route:
Bloodborne (contact with blood/body fluids through broken skin, mucous membranes, or a sharp): hepatitis B ( HBV ), hepatitis C ( HCV ), and HIV . Gloves, eye/face protection, and sharps discipline block this route. HBV is highly transmissible, which is why hepatitis B vaccination is offered to responders.
Droplet (large respiratory droplets from coughing/sneezing within a few feet): influenza, pertussis, meningococcal disease. A surgical mask on you — and ideally on the patient — interrupts droplet spread.
Airborne (tiny particles that linger and travel): tuberculosis ( TB ), measles, varicella. These require an N95 respirator , not a simple surgical mask.
Contact (direct or via surfaces): MRSA, C. difficile, scabies. Gloves, hand hygiene, and surface disinfection control this route.
Hand hygiene is the single most effective infection-control measure — wash with soap and water (preferred for visibly soiled hands or after contact with spore-forming organisms) or use alcohol-based hand rub. Glove use does not replace handwashing; gloves are removed and discarded after each patient and hands are cleaned, because gloves can have micro-tears and contamination occurs during removal. Pairing the route to the disease to the correct PPE is the reasoning the exam expects rather than rote memorization of a PPE list.