Study guide

10.1 Plan Review & Food Safety Management Systems

NRFSP Food Safety Manager Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 NRFSP Food Safety Manager Exam Facts 1.2 The 9-Domain Blueprint & How to Study

2 Domain 100: Implementing Active Managerial Control

2.1 Self-Inspections & Regulatory Compliance 2.2 Building a Food Safety Culture 2.3 Applying HACCP: The Seven Principles 2.4 Refillable Containers & Food Defense

3 Domain 200: Managing Personnel

3.1 Training & Supervising Personnel 3.2 The Big 6 Pathogens & Employee Illness Policy 3.3 Handwashing & Proper Glove Use 3.4 Personal Hygiene: Jewelry, Hair Restraints & Attire

4 Domain 300: Addressing Allergen Issues

4.1 Identifying the Big 9 Allergens 4.2 Building Allergen Awareness Among Staff & Guests 4.3 Preventing Cross-Contact 4.4 Allergen Labeling & Menu Disclosure

5 Domain 400: Purchasing, Receiving, and Storing

5.1 Approved Suppliers & Receiving Inspections 5.2 Storage Procedures: FIFO, Hierarchy & Package Integrity

6 Domain 500: Preparing Foods — Cross-Contamination, Cooking & Cooling

6.1 Preventing Cross-Contamination & Utensil Sanitation 6.2 Cooking Temperatures & Monitoring 6.3 Two-Stage Cooling Procedures

7 Domain 500: Preparing Foods — Reheating, Date Marking & Thawing

7.1 Reheating Procedures 7.2 Date Marking Requirements 7.3 Safe Thawing Methods

8 Domain 600: Serving Foods

8.1 Hot & Cold Holding, and Time as a Public Health Control 8.2 Self-Service & Food on Display 8.3 In-Use Utensil Storage 8.4 Off-Site & Catered Food Service

9 Domain 700: Cleaning and Sanitizing

9.1 Cleaning, Sanitizing & Disinfecting Procedures 9.2 Master Cleaning Schedules 9.3 Poisonous & Toxic Materials Storage

10 Domain 800: Managing Establishment Facilities — Plan Review, Water & Plumbing

10.1 Plan Review & Food Safety Management Systems 10.2 Water Supply, Plumbing & Wastewater Disposal

11 Domain 800: Managing Establishment Facilities — Maintenance, Pests & Equipment

11.1 Facility Maintenance, Lighting & Ventilation 11.2 Integrated Pest Management 11.3 Equipment, Waste Disposal & Miscellaneous Standards

12 Domain 900: Responding to Crises

12.1 Imminent Health Hazards & General Emergencies 12.2 Foodborne Illness Complaints & Recall Management

10.1 Plan Review & Food Safety Management Systems

Key Takeaways Explain This Topic AI

Plan review is triggered by new construction, conversion of an existing building into a food establishment, extensive remodeling, or a menu/process change that requires new equipment.

A plan review package typically includes the facility layout, plumbing schematics, equipment specifications, ventilation design, and finish schedules, reviewed and approved before construction is finalized.

A Food Safety Management System (FSMS) is a documented, HACCP-based combination of SOPs, training, monitoring, and record-keeping that proactively controls the FDA's five foodborne-illness risk factors.

Passing a single inspection is only a snapshot of conditions on one day; an FSMS is the establishment's ongoing daily operating discipline.

Plan review builds the physical capability for a safe facility; active managerial control is the manager's day-to-day exercise of that capability during actual operations.

Last updated: July 2026

What Is Plan Review?

Plan review is the process by which a local health department (or other applicable regulatory authority ) examines and approves the design of a food establishment's facility before construction, renovation, or equipment installation is finalized. Rather than waiting until a brand-new restaurant opens its doors — or a remodeled kitchen goes live — to discover that the mop sink is missing, the hand sink is in the wrong spot, or the ventilation hood doesn't meet code, plan review catches these problems on paper, while they are still inexpensive and straightforward to correct.

When Is Plan Review Required?

Most jurisdictions that base their regulations on the FDA Food Code require a plan review submission whenever an establishment undertakes:

New construction — building a food establishment from the ground up

Conversion of an existing structure — converting a building that was not previously a food establishment (for example, a retail store becoming a deli) or converting between different types of food establishments

Extensive remodeling — significant renovation of the kitchen, dining area, or supporting facilities

A change in menu or process that requires new equipment — for example, adding a smoker, a sous-vide setup, or another specialized piece of cooking equipment that changes the facility's food-safety risk profile

A change of ownership paired with a change in the type of food preparation — some jurisdictions trigger review here too, particularly when the risk category changes

What Gets Reviewed

A plan review submission is typically a package that includes:

  • Item What the Reviewer Checks
  • Facility layout / floor plan Workflow, separation of raw and ready-to-eat food, adequate space
  • Plumbing schematics Location of hand sinks, mop sinks, grease traps, backflow prevention

Equipment specifications NSF/ANSI-listed or equivalent equipment, correct placement, adequate cooling and hot-holding capacity

  • Ventilation plans Hood systems sized correctly for the cooking equipment, makeup air
  • Finish schedules Non-absorbent, cleanable floor, wall, and ceiling surfaces
  • Lighting plans Adequate light levels at food-prep and handwashing areas
  • Why Plan Review Matters to a Manager

For a certified food safety manager , understanding plan review is not just academic. If a facility is designed without enough hand sinks, without a properly sized grease trap, or with equipment that can't reach safe holding temperatures, the manager inherits a building that fights against food safety every single shift. Retrofitting plumbing or ventilation after a kitchen is built and operating is dramatically more expensive — and more disruptive to business — than correcting the same issue on a blueprint. A manager who recognizes what triggers plan review can flag it to ownership early, before a remodel or menu change begins, avoiding costly delays, failed inspections, or a stop-work order from the health department.

Food Safety Management Systems

A Food Safety Management System (FSMS) is a documented, systematic set of practices an establishment puts in place to prevent foodborne illness before it happens , rather than simply reacting to problems found during a health inspection. Where a routine inspection is a snapshot of conditions on a single day, an FSMS is the establishment's ongoing operating discipline — every day, every shift.

An effective FSMS is typically built on HACCP (Hazard Analysis Critical Control Point) principles and combines several components:

Written policies and standard operating procedures (SOPs) — documented, step-by-step procedures for high-risk tasks such as cooling, cooking, receiving, and cleaning and sanitizing

Employee training — ensuring every employee understands and can perform the SOPs that apply to their role

Monitoring procedures — routine checks (for example, logging cooler temperatures or verifying cooking temperatures) that confirm SOPs are actually being followed

Record-keeping — logs and documentation that create a verifiable trail showing the controls are working, not just written down and forgotten

Corrective action plans — pre-determined steps staff take the moment monitoring reveals a problem, such as a cooler running above 41°F

FSMS vs. "Just Passing Inspection"

A common misconception is that food safety equals passing the health inspector's visit. An FSMS shifts the mindset from passive compliance — fixing whatever the inspector happens to find, on the day the inspector happens to be there — to proactive control , actively managing the FDA's five foodborne-illness risk factors every day whether or not an inspector is on site. The five FDA risk factors an FSMS is built to control are: food from unsafe sources, inadequate cooking, improper holding temperatures, contaminated equipment, and poor personal hygiene.

Plan Review + FSMS + Active Managerial Control

These three concepts work together across the life of an establishment. Plan review happens once (or whenever the facility changes materially) and ensures the physical space — the plumbing, equipment, and layout — is even capable of supporting safe food handling. An FSMS is the documented operational framework built on top of that physical capability. Active managerial control (AMC) , covered in the domain on assuring process food safety, is the manager's day-to-day exercise of that FSMS: intervening in real time, coaching staff, and adjusting procedures to keep the five risk factors under control during actual operations. A facility can pass plan review with an excellent design and still fail food safety if no one exercises active managerial control on the floor — the physical plant, the documented system, and daily leadership all have to work together.